It is important to have light and air circulation at the time of power failure in the lift. Even the power
failure may occur rarely, but it's our duty to provide enough comfort to the person being inside the lift.
By keeping
in our mind we have developed an electronic generator capable of supplying 50W of
made forthis
electronics
electrical output to power up your lights and fan inside the lift.
No need to go for separate emergency light for lighting purpose. You can use
the same 2 feet lamp fitted inside the lift as emergency light.
It could be used to run a fan too along with light in case the total load is not
more than 50W.
Compact size. Standard 5-pin socket to plug in 230v AC loads and 2 pin socket
24v DC load.
Charging indication on LED.
No need of battery maintenance.
Wide range of input voltage will not affect the charging modes. Since it
power up the same light inside lift, you could be kept at the top of lift.
No need to look for any place to mount inside lift like Emergency light
AC Output
DC Output
Mabara Manufacturing Company
8/100, Thiruvalluvarpuram, 1st Street,
Choolaimedu, Chennai - 600 094
Tamilnadu, India
Tel : +91 - 44 - 2374 3643
Mobile : +91 - 93400 50607
Email : [email protected]