Wireless Communications (including satellites)

Wireless Communications
Wireless Media
Radio Waves for multicast communications radio, TV and paging systems
 Microwaves for unicast communication cellular telephones, satellite networks, and
wireless LANs
 Infrared - short-range communication in a
closed area using line-of-sight propagation

Electromagnetic Spectrum



Short wave – high frequency (IR, light), no licensing,
can’t penetrate walls or curve round obstacles
Microwave – directional, line of sight, licensing
needed
Radio – long wave, low frequency, licensing needed;
can curve round earth surface, penetrate water, are
omnidirectional
Bands – spectral radio frequencies
Band
Range
Propagation
Application
VLF
3–30 KHz
Ground
Long-range radio navigation
LF
30–300 KHz
Ground
Radio beacons and
navigational locators
MF
300 KHz–3 MHz
Sky
AM radio
HF
3–30 MHz
Sky
Citizens band (CB),
ship/aircraft communication
VHF
30–300 MHz
Sky and
line-of-sight
VHF TV,
FM radio
UHF
300 MHz–3 GHz
Line-of-sight
UHF TV, cellular phones,
paging, satellite
SHF
3–30 GHz
Line-of-sight
Satellite communication
EHF
30–300 GHz
Line-of-sight
Long-range radio navigation
(Super)
(Extremely)
Wavelength and Frequency
Speed of light c = 3 x 108 m/sec = 300000000
Wavelength in metres = λ
Frequency in Hz = ν
c = λν
Example: microwave 2.5 GHz, or 2,500,000,000 Hz
Wavelength = 300,000,000 / 2,500,000,000 = 0.12 m
Propagation methods
Omnidirectional antennas - RW
Unidirectional antennas - MW
Physical transmission
Attenuation with distance
 Blocking, reflection
 Refraction – atmosphere, water
 Scattering, diffraction – small obstacles
 Multipath propagation – multiple signals,
intersymbol interference
 Doppler shift – moving transmitter/receiver

Multiplexing & Modulation
Multiplexing

Space, e.g. cellular systems
 TDM, FDM - widely used
 Code Division Multiplexing (CDMA)
 Military use originally
 Different channels are assigned different codes
 Needs precise control of transmission power and code
assignments
An analogy to the problem of multiple access is a room (channel) in which people
communicate with each other. To avoid confusion, people could take turns speaking
(time division), speak at different pitches (frequency division), or speak in
different directions (spatial division). In CDMA they would speak different
languages.
Modulation

frequency, amplitude & phase
Advanced encoding, modulation and multiplexing schemes

MCM – multicarrier modulation. Data is split into several components, and each is
transmitted over separate carrier signals.

OFDM – orthogonal (independent / non-overlapping) FDM, with PSK & QAM
FDM: (frequency division multiplexing) several signals combined on single
communications channel. Each is assigned a different frequency (subchannel)
within the main channel.
In OFDM priority is given to minimizing the crosstalk, among the channels.
PSK: the phase of a signal is varied to convey information. The simplest technique is
binary phase-shift keying (BPSK): codes bits using 2 phases (0/180 degrees).
QAM: (quadrature amplitude modulation) - a method of combining two amplitude
modulated signals into single channel; doubling effective bandwidth. QAM signal
has 2 carriers, each have same frequency but phase differs by 90 degrees (1/4
cycle, i.e. ‘quadrature’).
Advanced encoding, modulation and multiplexing schemes
(Continued)

COFDM – coded OFDM - mod scheme that divides single digital signal across
1,000 or more signal carriers. The signals are sent in frequency ranges that do not
overlap (orthogonal) so they do not interfere with each other.

Spread Spectrum (to overcome localised interference) – Direct sequence (DSSS)
and Frequency hopping (FHSS) – used with CDMA
FHSS divides 2.4 GHz band into 75 1-MHz channels. Transmitters and receivers
hop rapidly around these channels at an-agreed-upon interval to avoid collisions.
FHSS operates at a maximum rate of 2 Mbps (depends on coding technique).
DSSS divides 2.4 GHz band into overlapping channels, each 22 MHz wide. Instead
of frequency-hopping, DSSS uses a technique called "chipping“- spreads modulated
data across the spectrum in a fashion that makes it possible to tolerate some signal
loss. A DSSS radio chipping with the ‘Barker Code’ modulates data using BPSK or
quadrature phase shift keying, operating at 1 or 2 Mbps, respectively.
Cellular Telephony
Connect mobile & stationary phones
 Find/track the mobile, assign to base station
 Handoff between base stations
 Cells of 1 - 12 mile radius, depending on area
 Transmission power must be low enough to
avoid interference
 Different frequency sets in adjacent cells

Cellular system
Frequency reuse patterns
Basic Operation

Sending – via BS to MSC, for connection and frequency allocation for
the call

Receiving – mobile paged by BS, and assigned a channel frequency

Handoff – one BS to another, hard or soft
Soft: BS coverage overlaps so that every cell phone set is always well
within range of at least one BS. In some cases, mobile sets
communicate with more than one BS at a time.
Hard: Link to the prior BS terminated before user transferred to new
cell’s BS. The mobile is linked to no more than one BS at a time.

Roaming – between ISPs, according to contract
Evolution

Analogue AMPS (advanced mobile phone system) 1983 onwards, 2.4kb/s.
As of February 18, 2008, carriers in USA are no longer required to support it.

Second Generation: D-AMPS, GSM (1991 on), IS-95, 64kb/s.
►D-AMPS (digital version of AMPS) adds TDMA to AMPS to get three
channels for each AMPS channel, tripling the number of calls that can be
handled on a channel.
►GSM (Global System for Mobile communication) uses a variation of
TDMA. GSM digitizes and compresses data, then sends it down a channel
with two other streams of user data, each in its own time slot.
►Interim Standard 95 (IS-95) - a CDMA-based 2G mobile
telecommunications standard.

Third generation: International Mobile Telecommunications-2000 (IMT2000) - the global standard for 3G wireless comms, 2mb/s. IMT-2000
provides a framework for worldwide wireless access by linking the diverse
systems of terrestrial and/or satellite based networks.

Fourth generation: 4G LTE (Long Term Evolution), True Mobile broadband,
designed primarily for data. IP-based protocols. 100mb/s. LTE services
launched by North American carriers (with Samsung SCH-r900 being
first LTE Mobile phone) September, 2010.
Satellite Networks
Satellites - features




Microwave, line of sight;
GHz range
Footprint – area of
coverage (GEO can cover
40% of earth’s surface).
Van Allen belt – charged
particles – avoid!
Uplink and downlink –
different frequencies
Satellite orbit altitudes
Clarke belt
(in honour of
Arthur.C.Clarke)
Equatorial
orbit
500 - 2000
Latency (RTT)
LEO
MEO
GEO
3 - 13 ms
33 - 100 ms
238 ms at equator (nearly ¼ second)
278 ms at edge of coverage (over ¼ second)
Typically
polar
orbit
Satellite frequency bands
Band
Downlink, GHz
Uplink, GHz
Bandwidth, MHz
L
1.5
1.6
15
S
1.9
2.2
70
C
4
6
500
Ku
11
14
500
Ka
20
30
3500
For more details, see: http://www.altair.org/labnotes_RadioBands.html
Satellites in geosynchronous orbit
Telephony, broadcast TV, Internet backbone
MEOs – used for GPS
18000 km altitude
 24 to cover the earth
 6 hrs to orbit
 GPS based on ‘triangulation’ – need distance
to (ideally) 4 satellites (can work with two in
some conditions, and if you know you are on
the earth’s surface then three suffice).
 Used widely by all sorts of users

GPS – Global Positioning System
LEOS
ISL Inter Satellite Link
 GWL – Gateway Link
 UML – User Mobile Link

LEO – global telephony
Polar orbits, 500-2000 km
 90-120 min to orbit
 20000 – 25000 km/hr
 8000 km diameter footprint
 System of satellites = network of switches


Little Leos - < 1GHz, low data rate messaging
 Big Leos (1-3 GHz) – Globalstar, Iridium
 Broadband Leos (like fibre) - Teledesic
Iridium constellation 1998
• 66 satellites, six orbits
• altitude 750 km.
• Global voice, data, fax,
paging, navigation
• 2.4-4.8 kbps,
• transmission at 1.6 G,
ISL 23 G spectrum
• 66 x 48 spot beams
• 2000 in operation to
cover the earth
Globalstar
48 Satellites, 6 orbits
 1400 km
 Relaying uses earth stations as well as
satellites.
 Ground stations can create stronger signals

Teledesic
(Planned for 2005, but too ambitious, construction
halted in 2002)






288 satellites, 12 polar orbits,1350 km
F/O like BB channels – Internet in the sky
8 satellites form a unit, earth stations are also
used
Earth  several 10k’s cells, each assigned a
time slot to transmit
User terminals communicate directly
155 M/1.2G up/down links – Ka band