Charging the Headphones
Location of Controls
1. Plug the small end of the Micro USB charging cable into the Micro
USB charging port on the headphones.
2. Plug the large end of the Micro USB charging cable into a USB port
on your computer or other USB charging device.
3. The LED Indicator light is RED when charging and turns BLUE when
the headphones are fully charged.
TM/MC
Bluetooth Headphones
USER GUIDE
BWA15AA003
NOTE: When battery power is low, a ”battery Low” reminder will be
heard every 20 seconds. This voice prompt will continue until all power
is depleted or the Micro USB charging cord is connected. Make sure
that you charge the headphones for at least 8 hours before using
them for the first time.
Bluetooth Headphones
TM/MC
TM/MC
Bluetooth Headphones
 [ ] Power/Answer Button
 LED indicator light
 [ / +] Button
BWA15AA003
 [-/
Micro
To conserve power, If the headset is not connected to a device for
approximately 10 minutes, the headphones will turn off automatically.
· long press - skip to next song
· quick press - increase volume
USER GUIDE
For iPhone users: An
additional battery meter
feature will be activated
and the remaining battery
capacity of the headphones will display on
your phone’s toolbar.
] Button:
· long press - skip to previous song
· quick press - decrease volume
 Micro USB charging port
 3.5mm auxiliary port
 Microphone
3.5mm Auxiliary Cable
Pairing the Headphones
1. Press and hold the [ ] button for approximately 7 seconds.
The LED Indicator light will flash RED and BLUE.
2. The Headphones are now in pairing mode and ready to be connected
to your device.
3. Keep the headphones and Bluetooth enabled device within 3 Feet of
each other during the pairing process.
4. Set your Bluetooth enabled device to search for Bluetooth devices.
5. When your Bluetooth enabled device finds the Headphones, select
“BW BASS DYNAMIX” from the list of found devices
6. If required, enter the password 0000. Select OK or YES to pair the two
units.
7. After a Successful registration, the LED Indicator light will slowly blink
BLUE.
On an iPhone
• Go to SETTINGS > BLUETOOTH (Make sure Bluetooth is turned ON)
On an Android Phone
• Go to SETTINGS > BLUETOOTH > MENU > Search for devices
(Make sure Bluetooth is turned ON)
12:12 PM
Bluetooth
Device name
BW BASS DYNAMIX
Visible
Make device visible
Search for devices
Bluetooth devices
Scanning
(see “Location of Controls”)
On other Cell Phones/Devices
• Review the instruction manual that came with your
phone/device.
Bluetooth: Enabled
Paired Devices:
12:12 PM
Searching for devices
ON
1 found
Stop
Devices
1. [ ] Button – Quick Press to play or pause the current
song.
2. [ / + ] Button – Long Press to skip to the next track.
3. [ - /
] Button – Long Press to skip to previous track.
To increase or decrease the volume, Quick press the [
buttons.
*Empty *
BW BASS DYNAMIX
1. Dialing last number called – To dial the last number called, double
press the [ ] Button.
2. Answering call – Quick Press the [ ] Button to answer an
incoming call.
3. Ending a call – Quick Press the [ ] utton again to end the call.
4. Rejecting a call – Press and hold the [ ] button for 2 seconds.
5. Quick Press the [ / + ] and [ - / ] Buttons to raise and lower the IN
CALL volume.
6. Transferring a call – Press and hold the [ / + ] Button for 3 seconds
to transfer the call between your phone and the Bluetooth
headphones.
7. Call Waiting – To answer an incoming call while a phone call is in
progress, Press the [ ] Power Button for 2 seconds to place the
current call on hold and accept the incoming call.
8. Mute – Press and hold the [ - / ] Button for 3 seconds. Press and
hold the [ - / ] Button again for 3 seconds to return to your call.
Bluetooth settings
Bluetooth
Bluetooth
Using the Headphones
Playing Music
/ + ] or [ - /
]
Paired
Now discoverable
Limited Warranty
Pairing the Headphones with a 2nd Mobile Device
The BWA15AA003 supports a Multi-Connect function that allows the
headphones to pair with two mobile devices at the same time. To
connect a second Bluetooth enabled device to your headphones, please
follow these steps below:
1. Make sure that the Headphones are connected to the first device
(refer to “PAIRING THE HEADPHONES”).
2. Now power the Headphones OFF.
3. Press and hold the [ ] Button for approximately 7 seconds
until the LED Charging Indicator light flashes RED and BLUE. The
headphones are now in pairing mode.
4. Set the second mobile device to search for Bluetooth devices.
5. When the second mobile device finds the headphones , select
“BW BASS DYNAMIX” from the list of found devices.
6. If required, enter the password 0000. Select OK or YES to pair.
7. After a successful registration, the LED Indicator light with slowly flash
BLUE.
8. On the first connected device, go to Bluetooth settings and select
“BW BASS DYNAMIX” to reconnect to the headphones.
9. You are now connected to both devices.
Device 1
Device 2
In the unlikely event that this product is defective, or does not perform properly, you may within Six (6) Months from your
original date of purchase return it to the authorized service center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
• Call the Customer Support number located below, or go to our website portal to receive an SRO return number.
• Provide proof of the date of purchase within the package (Dated bill of sale).
• Prepay all shipping costs to the authorized service center, and remember to insure your return.
• Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within
the package.
• Describe the defect or reason you are returning the product.
Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by
the service center determines this product is defective. Products received damaged as a result of shipping will require
Playing music or media when two phones are paired
When using the Multi-Connect function, both mobile devices can make
and receive phone calls. However, media will only play from one device. In
order to play media from the other device, unpair both devices then pair
them in the opposite order.
Redialing the last number called when two phones are paired
If two phones are paired and you redial a number (press the [ ] button
twice quickly) the headphones will choose the phone which was
connected first to call from. The second phone connected will not
respond.
Switching between two calls when two phones are paired
While on a live call with one phone and the other phone rings with an
incoming call, quick-press the [ ] button to answer the second phone.
The first phone will terminate the call.
The shipping address of the authorized service center is:
Southern Telecom, Inc.
Attention: Customer Service (2nd Floor)
14-C 53rd Street
Brooklyn, NY 11232
Should you have any questions or problems concerning this product, please contact our customer service department at:
Customer Support:
Phone: 1-877-768-8481 (Toll Free)
Or via the web:
www.southerntelecom.com
Click on “Product Support”
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of
alters or repairs this product. All products being returned to the authorized service center for repair must be suitably
packaged.
Legal Information
Caution: Any changes or modifications not expressly approved could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
- the
uses and can radiate radio frequency energy and, if not installed and used in accordance with
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
· Consult the dealer or an experienced radio/TV technician for help.
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY SOUTHERN TELECOM, INC., IT’S
AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
SOUTHERN TELECOM, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF NEW YORK.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long
legal rights, and you also may have other rights that vary from state to state.
Manufactured by Southern Telecom, Inc.
Distributed by
Wal-Mart Stores, Inc.
Bentonville, AR 72716
Printed in China