ITEM NO.: LS-22290
ASSEMBLY INSTRUCTIONS:
Led Shade (E)
1. CAREFULLY UNPACK AND PLACE ALL LAMP
PARTS ON A SMOOTH SURFACE AND LINE
THEM UP AS PER THE SKETCH.
2. SCREW FINIAL (H) INTO ARM (G).
3. ADJUST ARM (G) TO DESIRED HEIGHT AND
Night light (D)
TIGHTENED WITH KNOB (F).
4. PUT LED DRIVER (I) INTO BASE (A).
5. ADJUST LED SHADE (E) AND ENJOY YOUR
NEW LAMP.
TOUCH SWITCH USE INSTRUCTIONS:
1. THE SWITCH OF THE LAMP IS CONTROLLED WITH A TOUCH SWITCH, LOCATED WITH A CIRCLE
ON THE BASE.
2. TOUCH THE LIGHT CIRCLE AND WITHIN 1 SECOND THE LIGHT WILL COME ON, TOUCH FOR 1
SECOND AGAIN AND LIGHT WILL GO OFF.
3. HOLD THE LIGHT CIRCLE LONGER THAN 1 SECOND AND THE LIGHT WILL BECOME BRIGHTER
GRADUALLY; HOLD THE LIGHT CIRCLE AGAIN FOR LONGER THAN 1 SECOND AND THE LIGHT
WILL DIM GRADUALLY.
4. MEMORY OF LAST OPERATION WILL BE STORED FOR NEXT USE.
ATTENTION:
1. PLEASE HOLD THE ARM (G) WHEN ADJUSTING WHEN KNOB (F) IS RELEASED THE ARM (G) MAY
DROP. SECURE THE POSITION OF THE ARM (G) BY TIGHTENING THE KNOB (F).
2. THE TOUCH SWITCH (B) WILL CONTROL THE LED SHADE (G) AND THE ROCKER SWITCH (C) WILL
CONTROL THE NIGHT LIGHT (D).
USE 60PCS 0.06W (MAXIMUM) LED BULB FOR TABLE LAMP
+ 3PCS 0.06W (MAXIMUM) LED BULB FOR NIGHT LIGHT.
(ALL THE LED BULBS INCLUDED)
※ PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE.
※ SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.