+
CO2 Membrane System
CO2 Membran System 250
CO2 Membran System 350
The professional way of CO2 adjustment
in your beverage!
K+H Armaturen GmbH + Tel. +49 (0) 7045/980-0 + Fax: +49 (0) 7045/980-27 + [email protected]
+
CO2 Membrane System
This system is the modern way of CO2 adjustment
precise
fine bubbles
In-Line
This system is cutting edge technology. Heart of the
unit is the hydrophobic membrane contactor.
This waterproof, but gas permeable membrane
allows adjusting CO2 while oxygen is reduced
during the same pass.
Getränk
Gas
CO2 is immediately dissolved:
No dissolution necessary
No bubbles visible
Other gases like O2 and N2 are removed
during the same pass
Membran
Wasserdicht,
gasdurchlässig
Possibilities of use
Precise CO2 adjustment for white wines with simultaneous oxygen reduction
Bubbleless production of carbonated wines
Bubbleless degasing of red wines
Precise oxygen addition for red wines
Degasing of water
In-Line production of sparkling juices
In-Line CO2 adjustment for beer
Alcohol reduction in wine
Properties
Control via 10” Touch-it Indutry PC
Fully automated CO2 adjustment
CO2 Sensor Anton Paar Carbo 510
Optical O2 Sensor
Automated membrane drying and conservation
Automated membrane testing
All valves pneumatic controlled
Options:
Integrated feed pump
Integrated data logging
Automated cleaning
Remote control or remote display
K+H Armaturen GmbH + Tel. +49 (0) 7045/980-0 + Fax: +49 (0) 7045/980-27 + [email protected]
+
Sizes
Type
CO2 Membran
Max. product
flow
Max. CO2
dosing
Membrane
surface
System 50
Semi-Auto
5.000 L/h
7kg/h
20 m²
System 100
Semi-Auto
10.000 L/h
10 kg/h
2 x 20 m²
System 100
AUTO
10.000 L/h
24 kg/h
2 x 20 m²
System 250
AUTO
25.000 L/h
70 kg/h
140 m²
System 350
AUTO
35.000 L/h
140 kg/h
2 x 140 m²
Length
width
height
1000 mm
600 mm
1900 mm
1000 mm
600 mm
1900 mm
1000 mm
760 mm
1900 mm
1000 mm
760 mm
1900 mm
1500 mm
900 mm
1950 mm
The units can be dimensioned according to your need, if technically possible.
Other dimensions upon request.
Characteristics
Max. Product flow [L/h]
Programm
Recommended
Temperature
CO2
Oxygen
35.000
5 – 25 °C
adjustment
0 – 3 g/L
removal*
50 – 99 %
12.000
20.000
5 – 15 °C
adjustment
3 – 9 g/L
1 – 5 bar
removal*
50 – 90 %
5.000
12.000
20.000
15 – 25 °C
removal*
50 – 90 %
removal*
80 – 99 %
10.000
25.000
35.000
10 – 20 °C
removal*
50 – 90 %
adjustment
0.5 – 10 mg/L
System
50
System
100
System
250
System
350
CO2
adjustment
5.000
10.000
25.000
Carbonation
High
1.500
5.000
Degasing
2.500
O2
adjustment
(optional)
5.000
*Removal is dependant on product flow, temperature, membrane integrity
K+H Armaturen GmbH + Tel. +49 (0) 7045/980-0 + Fax: +49 (0) 7045/980-27 + [email protected]
+
K+H Armaturen GmbH
An der Hessel 5
D-75038 Oberderdingen
Telefon +49 7045 980-0
Fax +49 7045 980-27
E-Mail [email protected]
STAINLESS-STEEL-PARTNER.COM
K+H Armaturen GmbH + Tel. +49 (0) 7045/980-0 + Fax: +49 (0) 7045/980-27 + [email protected]