Software
SFT2841settingandoperating
software
Function
The SFT2841 software is the setting and operating tool for Sepam series 20, Sepam
series 40 and Sepam series 80.
It may be used:
bprior to commissioning and without connection to Sepam, to prepare Sepam
protection and parameter settings
bduring commissioning, on a PC connected point-to-point to the front panel Sepam:
vto load, unload and modify Sepam protection and parameter settings
vto obtain all measurements and useful information during commissioning
bduring operation, on a PC connected to a set of Sepam relays via an E-LAN
multipoint communication network:
vto manage the protection system
vto monitor the status of the electrical network
vto run diagnostics on any incidents affecting the electrical network.
PE00
PreparationofSepamparameterandprotectionsettingsin
unconnectedmode
bconfiguration of Sepam and optional modules, and entry of general settings
benabling/disabling of functions and entry of protection settings
badaptation of predefined control and monitoring functions
bcreation of personalized mimic diagrams for local display.
Sepamcommissioningviaapoint-to-pointconnectiontothe
frontpanel
4
PE00
SFT2841: Sepam series 80 hardware configuration.
baccess to all functions available in unconnected mode, after entering the
protection-setting or parameter-setting password
btransfer of Sepam parameter and protection setting file, prepared in unconnected
mode (downloading function), protected by the parameter-setting password
bdisplay of all measurements and useful information during commissioning
bdisplay of logic input, logic output and LED status
btest of logic outputs
bdisplay of Logipam variables
bsetting of Logipam parameters (configuration bits, timers, etc.)
bmodification of passwords.
Management of protection functions and network diagnostics
with an E-LAN multipoint network connection
breading of all Sepam protection and parameter settings, modifications following
entry of the protection-setting or parameter-setting password
bdisplay of all the Sepam measurement data
bdisplay of Sepam, switchgear and network diagnosis data
bdisplay of time-tagged alarm messages
bretrieval of disturbance recording data.
SFT2841: output testing.
Efficient, easy-to-use software
PE0
bmenus and icons for fast, direct access to the data required
bguided navigation to go through all the data input screens in the natural order
ball data on the same function together in the same screen
btrilingual software: English, French, Spanish
bon-line help, with all the technical information needed to use
and implement Sepam
bfamiliar file management in Microsoft Windows environment:
vall file management services included: copy / paste, save, etc.
vprinting of parameter and protection settings in standard layout.
SFT2841: alarm history.
Livre 1.indb 142
18/04/2007 11:01:25