Violet Laser Light (405nm) 120901
Violet Laser Light ( 405 nm )
Summary :
Laser Light Violet (405 nm) series are easy to use very
much.
It is very small and light, And a reaction is fast.
Because it is the semiconductor (diode) laser.
For Laser Disk, Machine of the print, Apparatus of
the measurement, Others.
It uses the glass lens of high quality. It has various
optical systems. And the built-in APC (Auto Power
Control) circuit.
Specifications :
Model
MLX-D12-405-125
Wave Length
405 nm
Optical Lens
Glass Lens
Optical Power
75 mW
Work Distance
50 mm ～ collimated
Pattern
Spot beam ( Oval )
Beam Diameter
3 mm × 2 mm (collimated beam)
Power Supply
DC 5V ～ 6V
Consumption
200 mA or less
Pulse Control
When you perform the pulse drive of laser, please input the following
rectangular wave into a signal wire ( white line ).
Item
Minimum
Maximum
“H” Level
2.0 V
VCC
Laser ON
“L” Level
0V
0.4 V
Laser OFF
From standing up delay about 200 μs or less to standing descending delay
100 μs or less.
Mass
17 g ( not include a cable )
Operating Temp.
0 ～ 40℃ ( non freezing )
Dimension & Connection ( mm )
0
φ12 -0.15
(52)
(100)
41
(1000)
Red line : +5V, Shield line : 0V, White Line : Control
KIKOH LASER JAPAN
3-33 Nakajimacho, Nishinomiya-city, Hyogo 663-8105 JAPAN
E-mail : [email protected] URL : http://www.kikoh.co.jp/index_e.html
Violet Laser Light (405nm) 120901
List of model name :
Model
Pattern
Output
MLX-J12-405-20
Spot (Oval)
MLXS-J12-405-20
Spot
MLXL-J12-405-20
Line (Slit)
MLXA-J12-405-20
Spot (Round)
4.0mW
MLXG-J13-405-20
Micron Spot
6.0mW
MLXH-J13-405-20
Micron Line (Slit)
6.0mW
MLXK-J13-405-20
Non Gaussian Line (Slit)
6.0mW
MLXKS-J13-405-20
Non Gaussian Line (Slit)
4.0mW
MLXT-J28-405-20
Parallel Non Gaussian Line
6.0mW
MLXI-J28-405-20
Non Gaussian spot
2.8mW
MLX-J12-405-125
Spot (Oval)
75.0mW
MLXS-J12-405-125
Spot
25.0mW
MLXL-J12-405-125
Line (Slit)
62.5mW
MLXA-J12-405-125
Spot (Round)
25.0mW
MLXG-J13-405-125
Micron Spot
37.5mW
MLXH-J13-405-125
Micron Line (Slit)
37.5mW
MLXK-J13-405-125
Non Gaussian Line (Slit)
37.5mW
MLXKS-J13-405-125
Non Gaussian Line (Slit)
25.0mW
MLXT-J28-405-125
Parallel Non Gaussian Line
37.5mW
MLXI-J28-405-125
Non Gaussian spot
17.5mW
Others
12.0mW
4.0mW
10.0mW
・These models are pulse control ( Laser ON / OFF ) types.
・When you control power outside, there are other models. Please refer us.
KIKOH LASER JAPAN
3-33 Nakajimacho, Nishinomiya-city, Hyogo 663-8105 JAPAN
E-mail : [email protected] URL : http://www.kikoh.co.jp/index_e.html
Violet Laser Light (405nm) 120901
●Attention
・ This laser application product is a product designed for embodiment in the apparatus.
・ This product is not a stand-alone laser product.
・ This product does not meet a standard of CDRH, IEC and the others.
・ On your own responsibility, please follow the safety standard by all means.
●Warning
・ This product is optical products. Please do not drop and do not add power forcibly.
It transforms, an original performance is ruined, and it causes the occurrence of trouble.
・ Please do not open the case.
It is when it not only causes the occurrence of trouble but also the equipment is damaged, and it
causes a fire.
・ Please move to the place that might not be used promptly stopping using, putting up the pasting
paper that shows that it is "Out of order" to the equipment, and by mistake when abnormality is
admitted in the equipment. It is very dangerous when used as it is.
・ Please choose the position and the angle for the laser beam not to catch one's eye directly when you
install it.
・ Please never look into the beam. Because the ultraviolet shine of especially less than 400 nm is not
visible, it is very dangerous.
・ Please give the temperature in the heat source and the source of luminescence to me as 60℃ or
less when you irradiate the laser beam to the heat source and the source of luminescence.
The longevity of the laser might be remarkably shortened.
・ Please use it within the range of electric use described in specifications.
・ Please compose the system so that the radiation of unnecessary laser beam may decrease.
・ Please confirm the noise level when you use the switching power supply. The noise might get on
the laser beam.
KIKOH LASER JAPAN
3-33 Nakajimacho, Nishinomiya-city, Hyogo 663-8105 JAPAN
E-mail : [email protected] URL : http://www.kikoh.co.jp/index_e.html