Efficient Lighting Systems Pty. Ltd.
ABN 14 050 028 209
Efficient Lighting Systems
39 Tinning Street, Brunswick,
Victoria 3056 Australia
PO Box 5084 Moreland West,
Victoria 3055 Australia
Linear Lighting Catalogue Ed 4, page 10
T :
F :
E :
W:
61 3 9222 5522
61 3 9222 5521
[email protected]
www.elslighting.com.au
SL30
• Miniature 30x30mm profile
• Remote deriver
• Even illumination - no spots
• Anodised or powdercoated in black,
• 83+ CRI or 90+ CRI versions
white or silver mannex finish
• Flat diffuser or U diffuser
• Custom made lengths
• Available as IPX4 with flat diffuser
(up to 3m length)
MOUNTING STYLES
SL30 - 83+ CRI
Surface mounted
LED colour
System watts
per 1000mm
Absolute lumens
per 1000mm
Length - custom
specification
3000K
28
1170
divisible by 60mm
3700K
28
1170
divisible by 60mm
4000K
28
1170
divisible by 60mm
System watts
per 1000mm
Absolute lumens
per 1000mm
Length - custom
specification
Suspended - down only
SL30 - 90 CRI
LED colour
3000K
34
1540
divisible by 50mm
4000K
31
1540
divisible by 50mm
Trimless recessed*
* in ceiling support to be installed
and supplied by installer
OPTIONAL ACCESSORIES
See the following pages
IPX4 VERSION – SURFACE MOUNTED
To specify the product as IPX4 add .IP
to the end of the part code
SL30
*REMOTE DRIVER
30
43
30
SL30
flat opal diffuser
30
SL30
U opal diffuser
Efficient Lighting Systems Pty. Ltd.
ABN 14 050 028 209
Efficient Lighting Systems
39 Tinning Street, Brunswick,
Victoria 3056 Australia
PO Box 5084 Moreland West,
Victoria 3055 Australia
Linear Lighting Catalogue Ed 4, page 17
T :
F :
E :
W:
61 3 9222 5522
61 3 9222 5521
[email protected]
www.elslighting.com.au
ACCESSORIES & OPTIONS
LIGHT COLOURS & DIMMING
Light Colour
Dimming Options
3000K
1-10v / DALI
3700K
1-10v / DALI
4000K
1-10v / DALI
2700K - 8000K colour tunable
1-10v / DMX / DALI
* 3700K & colour tunable not available on Systemkanal up/down & Valley78
EXTRUSION FINISH
ACCESSORIES
Finish
Accessories
anodised (SL30 only)
“easy install” surface mounting bracket
mannex silver powdercoat
optional with all surface
mounting models
mannex white powdercoat
wall mounting bracket
mannex black powdercoat
custom powdercoat
(refer Dulux powdercoat colour chart)
*optional extra
check page 4 for compatibility
round junction box
3mtr suspension kit
ANGLES
T
90°
*supplied as standard with all
pendant mounting models
rod suspension
*optional for
Up down 50 & Valley 78
*other angles upon request
DIFFUSER OPTIONS
Diffuser
flat opal diffuser
U shape opal diffuser
Efficient Lighting Systems Pty. Ltd.
ABN 14 050 028 209
Efficient Lighting Systems
39 Tinning Street, Brunswick,
Victoria 3056 Australia
PO Box 5084 Moreland West,
Victoria 3055 Australia
Linear Lighting Catalogue Ed 4, page 18
T :
F :
E :
W:
61 3 9222 5522
61 3 9222 5521
[email protected]
www.elslighting.com.au
EASY INSTALL
EASY INSTALL SURFACE MOUNTING BRACKET
The easy installation bracket allows for a trouble free installation where it is not
necessary to remove the lens and gear trays for installation.
The easy install bracket comes fixed to the back of the linear system and can be slid
along the length to any suitable point for mounting. Only the end cap needs to be
removed for incoming cables to be connected to a terminal block.
When using the easy install bracket the linear system will sit approx 10mm off the
ceiling surface.
ERSUNK SCREW
GRUB SCREW
Easy install surface mounting bracket
top bracket
ceiling mounting fixing screw
B SCREW
bottom bracket
fixing grub screw
D
C
B
A
D
REV
C
NOTE
B
A
REV
DATE
REVISION DETAILS
NOTE
DESIGN & DRAWN BY
HV
DATE
19/10/2015
MATCHING PARTS
3rd ANGLE PROJECTION
MATERIAL
3D CAD FILE
FINISH
UNIT
TOLERANCES
SCALE
SIZE
PART DESCRIPTION
SK SURFACE BRACKET KIT
PART NUMBER
DESIGN & DRA
MATCHING PA
MATERIAL
A4
REVISION NUMBER
A
SK_SURF_BRK_KIT_ASSEMBLY_RevA
FINISH
PART DESCRIPT
S
PART NUMBER
Efficient Lighting Systems Pty. Ltd.
Efficient Lighting Systems
Linear Lighting Catalogue Ed 4, page 19
ABN 14 050 028 209
39 Tinning Street, Brunswick,
Victoria 3056 Australia
PO Box 5084 Moreland West,
Victoria 3055 Australia
SENSORS & EMERGENCY
LIGHT SENSOR – ORGANIC RESPONSE
How Organic Response® Works
Organic Response applies the concept of Distributed Intelligence to a lighting
control system that allows each individual luminaire to make lighting decisions
based on the presence of occupants in its immediate vicinity, ambient light levels,
and occupancy information it receives from its neighbouring luminaires. It then
contributes occupancy information back to the other luminaires creating the
Occupancy Information Cloud®, so other luminaires can also make informed lighting
decisions. Although they make decisions individually, Distributed Intelligence means
all the lights in a defined space act seamlessly, as an elegant and robust system.
At the heart of Distributed Intelligence is the Sensor Node,
which is integrated into each luminaire during manufacture
to create an Organic Response Enabled luminaire.
Each Sensor Node contains a motion sensor, infrared transmitter,
infrared receiver and ambient light meter.
The profiles can be fitted with the Organic Response Sensor
Node within a blanking plate.
These nodes can be fitted along the length of a continuous
luminaire at specific spacings to ensure compatibility between
Sensor Nodes while also providing complete comfort
for all occupants with the benefits of increased energy savings.
Refer to page 4 to check profile compatibility of the Organic
Response Sensor Node.
EMERGENCY - TRIDONIC
A number of the profiles featured in this catalogue can be fitted with
a stand alone non maintained 2.5W LED emergency module that
illuminates upon power failure.
This LED emergency module is placed within a cover plate in the linear
system at intervals to meet emergency lighting standards.
Spacings –
C0
D16
C90
D16
T :
F :
E :
W:
61 3 9222 5522
61 3 9222 5521
[email protected]
www.elslighting.com.au