12
Volume 1
20
Types of Assembly
Mounting Carrier
221 Series
Inserting connectors into the mounting carriers.
Removing connectors from the mounting carrier.
Removing splicing connector from the mounting carrier.
Mounting of strain relief plate (222-505) to the mounting
carrier.
Snapping the angled DIN-rail adapter on the mounting
carrier.
Testing connectors via test slots on top of the carrier.
Strain relief by cable tie on the carrier, transverse to the
connector‘s wiring direction. Molded marking clamping
units.
Vertical mounting with strain relief plate on DIN 35 rail.
Marking clamping units via marker strips.
Horizontal mounting on DIN 35 rail using angled DINrail adapter.
Horizontal mounting with strain relief plate on DIN 35
rail using angled DIN-rail adapter.
Mounting carrier with strain relief plate mounted vertically
on a plate. Round cable fixed via strain relief lug.
Horizontal mounting with strain relief plate on level surfaces.
Marking clamping units via marker strips (210-334).
Mounting Carrier
221 Series
12
21
Color
Item No.
67,5 mm/2.66 in
Pack.
Unit
Mounting carrier, 17.5 mm wide,
for 2-, 3-, 5-conductor compact splicing connectors
orange
221-500
21,5 mm/
0.85 in
25,5 mm/
1 in
77,6 mm/3.06 in
50 (5x10)
Item-Specific Accessories
Self-adhesive marking strips, plain,
Height of marking strip: 5 mm, 48 selfadhesive strips per card
210-334
1
white
Color
Item No.
Volume 1
Angled DIN-rail adapter
52 mm/2.04 in
Strain relief plate
Mounting carrier
42 mm/1.65 in
Pack.
Unit
Strain relief plate, 4 mm thick,
for snap-on fixing to 221-500 and 222-500 mounting carrier
orange
222-505
50 (5x10)
Color
Item No.
Pack.
Unit
Angled DIN-rail adapter, 18.5 mm wide,
in combination with 221-500 and 222-500 mounting carrier for DIN 35 rail mounting
gray
222-510
50 (5x10)