College Dorm Fire Safety Guide Be aware of at least two means of egress – have a backup plan in case one exit is blocked Be sure to have a means to break windows if necessary as an escape route Make sure you always know where a flashlight is – it will be able to help guide you through smoke filled rooms Do not connect multiple extension cords together Do not staple extension cords – damaging the insulation that is meant to protect you from currents and potentially exposing a wire increases the possibility of sparking Do not overload extension cords, power strips or outlets – they can overheat Do not burn candles or incense New Empire Group, Ltd. 25 Nassau Lane Island Park, NY 11558 866.431.8100 www.NewEmpireGroup.com Fire Extinguishers Classes Class A fires are fueled by ordinary combustible or fibrous material (wood, paper, cloth and some plastics). Do not use carbon dioxide or ordinary dry chemical extinguishers on Class A fires – use an APW or Air Pressurized Water extinguisher Class B fires include flammable or combustible liquids, greases and gases, such as gasoline, paint and propane. Use either a carbon dioxide extinguisher or a dry chemical extinguisher on this type of fire Class C fires include electrical equipment, such as motors and heaters that are not connected to a power source. Do not use water extinguishers on energized electrical equipment. Use a carbon dioxide extinguisher on this type of fire Combustible metals (Class D) are difficult to extinguish, because once ignited, they give off sufficient oxygen to support combustion – try using “dry powder” to extinguish these types of fires as it works by smothering and heat absorption. Class K fires are fueled by cooking oils or fats. Wet chemical fire extinguishers are the best type of extinguisher for Class K fires. New Empire Group, Ltd. 25 Nassau Lane Island Park, NY 11558 866.431.8100 www.NewEmpireGroup.com
© Copyright 2026 Paperzz