CuattroDR™ Digital Radiography 14” x 17” 140 µm Wireless Detector

CuattroDR™ Digital Radiography
14” x 17” 140 µm Wireless Detector
The 14”x17” detector is a light-weight wireless cassette that powers your digital radiography equipment, keeping
patients and users safe while allowing for a portable imaging workflow. The cassette can generate crisp images of
2560 x 3072 pixels in real-time and can store up to 100 X-ray acquisitions on-board. Automatic Exposure Detection
(AED) and Auto Synchronization Modes allow for simple installation in minutes, without the need to “synchronize” or
“re-wire” generators and mechanics. The detector size, along with its wireless design, guarantees effortless insertion
into existing tables, wall-stands, and Bucky systems.
14”x17” 140 µm Wireless Digital Detector Features
14”x17” 140 µm Wireless Digital Detector Specifications
• 2560 x 3072 pixels
Mechanical Conditions
• 140 micron pixel size
• Weight
2.9 Kg (GOS) / 3.1 Kg (Csl)
• On-board storage for up to 100 images
• Outer Dimensions
(WxHxT) cm
46.0 x 38.4 x 1.5
• Automatic Exposure Detection (AED) and Auto Synchronization Modes
• Completely wireless operation with fast data transfer rates
Image Geometry
• Super-stable wireless connection with working distances over 100 ft.
• High resolution
3.4 lp/mm
• Faster image transfer than wired detectors
• Image size
14 x 17 inches (35 x 43cm)
• Over 150 consecutive images per battery charge
Electrical Performance
• 4 hours of run time at 21°C (75°F)
• Battery performance - 150 images for 4 hours (100 sec. cycle)
• 3 batteries included with triple charger
• Power - 7.4V 4000mAh lithium ion polymer battery
• 2 hour charge time per battery (from empty)
• A/D Conversion Dynamic Range: 14 bits
• Image Readout Preview (wireless): 3 seconds
• Sensitivity @ RQA5 beam, 25°C: 145LSBs/uGy
• Image Interface Data Rate/(IPv4): Gigabit
• X-Ray Generator Range: 40-150 kVp
• Digital Output: 16 bit
• Wi-Fi (802.11 a/b/g/n): 2.4/5.0 GHz
• Wi-Fi (802.11 a/b/g/n): 2.4/5.0 GHz
X-Ray Performance
• Detector Technology
a-Si TFT w/PIN Diode
• Scintillator
CsI:Tl / Gadolinium Oxide
• Grayscale
16384 grayscales
Operating Environment
• Limiting Resolution
15 to 35º C
• Humidity
30 - 85%
Battery charger and high-capacity battery
• Lithium-polymer battery
• Three batteries included
• 2 hour full recharge
• Additional batteries optional
• 4 hour battery operation
Real-time image acquisition. Crisp images. Intuitive to use.
SM-81 Rev 2.0
877.446.3743 x3 · merge.com