HSCU-300/HXCU-100 Intercom & Tally connections Sumimasa Yanagisawa Steve Flynn July 2009 Intercom: A standalone communications system used by TV production crews and on-air engineering staff 2 configurations: 4 – Wire (Matrix) Communicate with a group, but can easily be configured for point - to - point 2 Wire (Party) -Usually communicates with a group, point - to - point requires more configuration -Uses a 32 Volt impedance generating central Power supply to drive external stations and belt packs (Referred to as a 2 – Wire “Wet” system) -Uses standard microphone cable -2 systems used: RTS & Clear Com (CC) Difference in impedance between the 2 systems, wiring is same **Both 4 - Wire and 2 - Wire systems include selectable Producer and Engineer channels Select 4 – Wire or 2 – Wire on SY-364 board • Producer: S530 4W – RTS(CC) •Engineer: S531 4W – RTS(CC) CCU Config menu Page C06: <INCOM/PGM> System Interface **Configure only when 2 wire system is used Select Clear Com or RTS for both Engineer and Producer channels 4-W will be displayed when 4-Wire intercom switch is selected on SY-364 board Wiring Overview: Simplified drawing of intercom section of rear panel D-Sub 25 pin connection - 4 wire connectivity shown 4 – Wire connection ENG receive ENG Talk PROD receive PROD Talk 2 – Wire connection **The most commonly asked intercom question: “How is a 2 wire system connected to the CCU?” ENG receive/Talk Connect to pin 1 (D-Sub 25) ENG/PROD GND Tie pins 3 and 16 to ENG/Prod common PROD receive/Talk Connect to pin 14 (D-Sub25) Tally 2 types used for indicating current “ON-AIR” status: RED (Program) and Green(Preview) There are various interfaces, all consisting of 2 wire connections: Contact closure: Simple, Closed (short) or Open switch Power: 24V or TTL (+5 VDC) Tally Switch settings, SY-364 board: RED: S730: Power/contact S733: Power/TTL *must set when S730 is Power Green: S731: Power/contact S734: Power/TTL *must set when S731 is Power Tally Switch settings Tally Connection (D-Sub 25) RED Tally GREEN Tally
© Copyright 2026 Paperzz