1/2
StrikeMaster ES
Stand-alone access
control system
for one or two
doors.
The new StrikeMaster ES is a robust
and reliable Keypad Access Control
System for installations requiring
elevated security levels.
Constructed to survive in exposed,
outdoor or unsupervised environments
these systems combine the field proven
durability of the StrikeMaster keypad
with a separate, remotely secured
electronic control module.
The control module along with a
dedicated high spec power supply is
contained within a tamper alarmed steel
enclosure.
This enclosure is located within the
secured building, protected from criminal
attempts to breach or disable building
security systems.
The control module supports both
IN and OUT functionality of either one
or two keypads (one or two doors).
Available in vandal resistant or robust
illuminated versions.
Features
// Entry under duress alarm feature with relay output.
// 2 keypad controller with power supply
for location in secure area. Controller and keypads have tamper monitoring
// Door contact monitoring for door forced or held event output
// Choice of:
// Door bell feature with unique tone for each door.
// Vandal resistant, IP65 rated, secure
keypad or
// Backlight keypad for aesthetics and or ease of use
// Audible and visual confirmation of code
acceptance and code denied (at the keypad).
// Up to 100 programmable user codes can be stored for either keypad.
// 4, 5 and 6 digit PINs can be programmed.
// Door latched or door locked mode.
// Anti tamper switch on keypad to detect removal from back box.
// Back box suitable for surface fixing or mounting on UK electrical flush installed back box
2/2
StrikeMaster ES
Typical StrikeMaster ES Installation
Electro-Magnetic
Door Lock
Electro-Magnetic
Door Lock
(mounted inside door)
(mounted inside door)
Secured
Control Module
(mounted inside door)
Access Control
Keypad
Access Control Keypad
(mounted outside door)
(mounted
outside door)
0.9 m – 1.0 m
Door 1
Door 2
(recomended)
(optional)
Ordering Information
DXPS1K10-ADT
StrikeMaster ES single door kit. Comprises of3 x 4 Keypad (Metal) with back box and fittings and Power supply with controller electronics. Quick Start guide included in kit. Full installation manual on web site. The controller can manage two doors/keypads with egress button, door monitor contacts etc. Requires a 12Vdc 7Ah battery
DXPS1W10-ADT
StrikeMaster ES single door kit. Comprises of 3 x 4 Keypad ((Illuminated) with back box and fittings and Power supply with controller electronics. Quick Start guide included in kit. Full installation manual on web site. The controller can manage two doors/keypads with egress button, door monitor contacts etc. Requires a 12Vdc 7Ah battery
DX1KT20-ADT
StrikeMaster ES Metal keypad only. For use with StrikeMaster ES kit only - not as a standalone keypad.
DX2KW20-ADT
StrikeMaster ES Illuminated keypad only. For use with StrikeMaster ES kit only - not as a standalone keypad.
STI-1KFS0201
StrikeMaster ES Keypad shield. For use with StrikeMaster ES keypads.
www.tycoisys.com // tycofis.co.uk // adt.co.uk // fcfplc.co.uk // firstcitycare.co.uk
The right is reserved to modify or withdraw any product or service without notice. PSAC590UK Issue – 2. November 2015 © 2015