Expand the possibilities
KTH Sales, Inc -- Merrillville, IN
A New Approach
For Metering
Pumps
Air Diaphragm Pump for
Chemical Metering
What if you could control the rate
of an air operated diaphragm
pump ? What would you gain ?
They are lower in cost
than metering pumps.
 They are easy to maintain
and repair.
 If only you could control
the speed.

You Can Now Have a Metering
Pump for rates above 25 GPH
without Gears or Hydraulics for the
price of an Electronic Metering
Pump
Wilden SPCI
Speed Controller and AccuFlo diaphragm pump.
Using An Air Diaphragm
Pump for Metering
 For
High or Low Pressure Applications
 Economical Alternative
to Large
Electronic or Hydraulic Driven Pumps.
Wilden - Accu-Flo Pumps
How does it work ?
 The
cycling of the pump is
controlled by the air valve. On
conventional pumps, the cycle
repeats when the stroke is
complete. The Accu-Flo uses an
electric solenoid valve to control
the cycle.
Wilden - Accu-Flo Pumps
How does it work ?
 When
energized, the solenoid causes a shift of the
pump. When de-energized, another stroke.
 Control the rate of the electrical signal and you control
the pumping rate of the pump.
SPC1 for Solenoid Shifted
Pumps - Accu-Flo
 Controls
the flow rate of the pump
 Offers on-off remote control
 Displays stroke rate and total strokes
 Use with Wilden Accu-Flo Solenoid Pumps 1/4” through 3” size of pumps
 Prices with A025 start at under $ 525.00
Wilden Pumps are available in
Polypro, Kynar or 316SS to
meet the most demanding
chemical additions
 Pumps
are self-priming and simple in operation
 Easy to service and trouble shoot
 Repetitive in capacity per stroke
SPCI is easy to set up and use
 Provides
digital indication of stroke rates.
 Provides totalization of strokes.
 Direct wiring of pump to 12VDC relay.
 ON - OFF external control responds to
signal from pH controller or other device.
 Controller power - 110V or 230V
Expand the possibilities
KTH Sales, Inc -- Merrillville, IN