Safe’T’Suction
-Patented Australian Design
-Safe, Dedicated Cleaner Connection
for Swimming Pools, Water Features
And Ponds.
What is the Davbroz Safe’T’Suction?
Safe’T’Suction provides a safe, dedicated
vacuum connection point for manual and
automatic pool cleaners.
Davbroz Safe’T’Suction?
It is ideal for Wet
Deck/Edge pools where a
skimmer box can’t be
fitted. Why would you
need a skimmer box at
all?
Safe’T’Suction has a
patented “Flow selection
device” that ensures safe
and reliable cleaner
operation.
How Does it Work?
Problem:
Solution:
External
VacuumingPoint
Wet Edge Catch Tank
Pump
Wet Edge Catch Tank
Pool
Pool
Check
Valve
3-Way
Valve
Pump
Filter
Vacuuming Point
Filter
To Pool
To Pool
Problem: On standard wet-edge pools, there is no skimmer box installed. Therefore there is no easy
or safe way to install a suction pool cleaner or to manually vacuum the pool or catch tank from the
pool.
Solution: Install the Davbroz Safe-T-Suction. This will provide for safe vacuum connection points for
manual or automatic pool cleaning. A three-way valve and check valve needs to be installed.
Safety
•
•
•
UL testing laboratory in California definition of Safe’T’Suction.
“ANSI/ASME A112.19.8 is intended for suction fittings, covers,
grates and similar entrapment prevention devices. Your product
is none of these. It is simply a component of the entire plumbing
system, but not the actual suction fitting that is relied upon to
prevent hair, body, finger and limb entrapment.”
Safe’T’Suction meets US Standard NSF/ANSI 50 for Water
Circulation system components and Related materials for
Swimming Pools, Spas and Hot tubs.
Swimmers are never in danger of increased suction at
underwater outlets as the reverse occurs when the
Safe’T’Suction cleaner attachment port is in use.
Connection with Skimmer Box
• Where a Skimmer is to be installed and is
placed in the correct location to surface skim,
the Safe’T’Suction can be installed between
the skimmer and the pump on the common
flow line.
• This provides a safe cleaner port and a shorter
hose to clean the bottom and sides while the
skimmer continues to draw in surface debris
as it was designed to do.
• Resulting in a cleaner pool.
SAFE’T’SUCTION LOCATION
• In the pool shell in or out
of the water.
• Safe’T’Suction can be
conveniently located
close to the Spa, catch
tank, water feature or
pond for manual
vacuuming.
• Remember that
Safe’T’Suction can be
installed safely anywhere
along the main suction
line and still operate from
one pump.
Added advantages
• POWER SAVING: Safe’T’Suction operates from the common flow line
and therefore uses the same pump as the pool filtration system.
• QUICK CLEAN: When a neglected pool needs to be cleaned quickly, a
hand held vacuum cleaner attached to the Safe’T’Suction will clean the pool
much faster than a robotic or an automatic suction cleaner. Even a pool
with an infloor system will benefit for only a small cost.
• SAND: Beachside areas that are sometimes covered in sand when a
strong onshore wind is blowing, have problems with infloor systems and
robotic cleaners. These pools are ideally suited to a Safe’T’Suction.
• PONDS: So many ponds are unfiltered and require regular algae cleanups.
Safe’T’Suction is easily installed and the connection port can be located in
the garden for hand vacuuming when needed.