VX300
VX300
The main feature of VX300 is to connect on
the C.O line, and show the numbers that had
dialled by that particular line. The main
function of this VX300 is become a tester for
auto dialer. It can show whether the numbers
that dialled by the auto dialer are correct or
not, whether there is any response from the
gateway, and make users to understand the
timing of the numbers that send out each
stage.
With an internal speaker, it can clearly allow
user to listen all the sound or tones like
example busy tone, dial tone, conversation
voice, etc. The other feature of this VX300 is
it can monitor the numbers dialled by each
phone and listen to the conversation. User
which using the phone that had been monitor
by VX300 will not be realized. However the
user of this feature must fulfil the law of
government.
3-1-4, Blk B, Lobby 3, 1st Flr, Megan Corporate Park, Desa Petaling, 57100 Kuala Lumpur, Malaysia.
Tel: +603-90591600 Fax: +603-90592300 E-mail: [email protected]
website: http://www.mycomsolutions.com
1
VX300
Power
VX300 is powered by AA battery 1.5V x 3 or AC/DC power adaptor DC9V/200mA.
Please remember to switch off the power to save the battery life.
Connection
Connect VX300 at any location on the telephone line, can monitor the numbers that
dialled by all the phones
Users must connect VX300 like the diagram above to monitor the numbers that send
by the dialers.
3-1-4, Blk B, Lobby 3, 1st Flr, Megan Corporate Park, Desa Petaling, 57100 Kuala Lumpur, Malaysia.
Tel: +603-90591600 Fax: +603-90592300 E-mail: [email protected]
website: http://www.mycomsolutions.com
2
VX300
Decoding
Once VX300 has been installed, it can start decode any number on the line. VX300 can
display 16 different DTMF signal including 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, *, #, A, B, C, D
Voice Monitor
Turn on the speaker will allow user to listen any voice on the telephone line. Volume of
the speaker is also adjustable from high to low volume.
Reviewing the Records
Press UP or DOWN button to review previous or next record. The upper right display
shows the duration between the current and the last records. Figure shows the
duration between the last digit of last number and the first digit of this number is 6.8
seconds.
The maximum number of digit is 43 for each record. VX300 can store up to 85 records.
When the memory full, it will overwrite the oldest record with the new record. Because
each screen can show only 15 digits, it will show right arrow sign on the right side of
number. Without pressing any button, the screen will move to next page
automatically, you can see the rest part of the digits.
Deleting the Records
Press twice DELETE button continuously, the displayed record will be deleted. Press
and hold DELETE button for 3 second, all memory will be erased. All memory will also
be cleared if user switch of the power or when it is out of power.
3-1-4, Blk B, Lobby 3, 1st Flr, Megan Corporate Park, Desa Petaling, 57100 Kuala Lumpur, Malaysia.
Tel: +603-90591600 Fax: +603-90592300 E-mail: [email protected]
website: http://www.mycomsolutions.com
3