Operating table top
Carbon FloatLine
Product Description
For TruSystem 7500
The one-part operating table top with longitudinal and transversal
shift can be transferred to existing columns of the TruSystem 7500
exchangeable table top systems.
Material Carbon
The table top is made of radiolucent, carbon fiber reinforced
composite material. The stainless steel motorized unit is resistant
to disinfectants and easy to clean.
Control unit
Options for equipment control include IR, cable or wireless remote
control devices. Via column key pad, the longitudinal shift as well
as the zero position can be adjusted.
With the control element Carbon FloatLine an adjustment in any
direction is possible. The speed can be adjusted continuously via a
force detection.
Machine Tools/Power Tools
Laser Technology/Electronics
Medical Technology
Intra-operative imaging
Because of the excellent X-Ray characteristics and the radiolucent
area up to 1.800 mm of the operating table top, the unlimited use
of 3D-C-arms
3D C arms and CT scanner is possible,
possible e.g.
e g with Brainsuite iCT.
iCT
Table top pad
The viscous elastic FoamLine pads are soft, detachable and in two
different heights available. Furthermore the pads are resistant to
disinfectants and electrically conductive. The attachment to the
table top occurs via Velcro strap.
Patient positioning
p
g
In extreme position the patient weight of the table top is 180 kg as
well as in zero position 225 kg.
All the accessories and positioning aids needed for optimal surgery
can be attached using adaptable side rails.
There are fife trenches each side of the table top which are used to
fastening patients via body straps.
Coupling point Carbon
The table top has a special carbon coupling point for the use of
different adapters X-RAY wide to attach head positioning
accessories. The single, double and triple joints enable all
positions required in neurosurgery to be achieved with the required
precision.
Application
Safety features
The table top has a 360° scan able area of 1,800 mm (71 in) for
For the prevention of a collision of the table top with the floor
p
imaging.
g g This combines optimally
p
y OR table
intra-operative
sensors are implemented.
p
With achievement of the least distance
applications for surgery with intra-operative radiology and
of 120 mm the movement is stopped and the final situation is
angiography.
signaled acoustically.
For an ergonomic working position for spinal surgery the lowest
Furthermore, tiliting and transversal shift as well as Trendelenburg
height of the table top is 678 mm (w/o pad).
and longitudinal shift cannot be adjusted at the same time. To
prevent a collision with the Floor the maximum possible
Using the selected design principle,
principle the operating table top can be
adjustment areas amounts to:
adjusted 800 mm (31 in) in the longitudinal direction and ± 125 mm
Transversal shift
Tilt
± 125 mm
5°
± 0 mm
10°
Longitudinal shift
Trendelenburg
800 mm
5°
5
For an ergonomic transfer with the shuttle the table top has a
650 mm
10°
length of 2.290 mm.
500 mm
15°
400 mm
20°
0 mm
max. 45°
(± 5 in) in the transversal direction. This allows the patient to be
put in a number of extreme positions with the greatest precision.
For the combination with the new control unit FloatLine the
maximum adjustment speed is 185 mm/sec.
Machine Tools/Power Tools
Laser Technology/Electronics
Medical Technology
Specification radiolucent areas
At maximum longitudinal shift, an area of 1,800 mm (71 in) is radiolu
ucent (with stationary column). If the table top is mounted to a mobile
column, the longitudinal shift area is limited by 300 mm to guarantee the
t stability of the column.
Carbon FloatLine with stationary column
(1800 mm radiolucent area 360°)
Carbon FloatLine with mobile column
With attached head positioning accessories, the area of the
(1500 mm radiolucent area 360°)
longitudinal shift is reduced by 300 mm (11.4 in). Without
longitudinal shift 1,000 mm (39 in) are radiolucent.
Machine Tools/Power Tools
Laser Technology/Electronics
Medical Technology
Technical Details
Operating table top Carbon FloatLine
Material-N°
Dimensions (LxWxH)
Without head positioning accessories
With head positioning accessories
Operating table top Carbon FloatLine/ T
Operating table top Carbon FL U/ U T
2
2,290
mm x 520 mm x 188 mm (86 in x 20.5 in x 7.4 in)
2,5
580 mm x 520 mm x 188 mm (97.4 in x 20.5 in x 7.4 in)
Width over side rails
Width over table top
Height of pads
560 mm (22 in)
520 mm (20.5 in)
C
Comfort
Plus: 55 mm (2 in); FoamLine: 90 mm (3.5 in)
Longitudinal shift with stationary and floor
mounting column
Normal mode
Reverse mode
800 mm (31.5 in)
650 mm (25.6 in)
Longitudinal shift
f with mobile column
500 mm (19.7
(
in))
Transversal shift
± 125 mm (± 5 in)
Adjustment speed
Longitudinal shift
Transversal shift
remote control: 80 mm/s (3.1 in/s); control element Carbon Free Float: 185 mm/s (7.2 in/s)
remote control: 30
0 mm/s (1.2 in/s); control element Carbon Free Float: 80 mm/s (3.1 in/s)
Trendelenburg/ anti-Trendelenburg
± 45°
Tilt
± 30°
Height adjustment (without pads)
TruSystem 7500 stationary column
TruSystem 7500 floor mounting column
TruSystem 7500 mobile column
1616200/ 1616203
1616201/ 1616204
678 mm – 1.228 mm (26.8 in – 48.3 in)
708 mm – 1.258 mm (27.9 in – 49.5 in)
698 mm – 1.248 mm (27.5 in – 49.2 in)
Height of table top (without pads)
189 mm (7.4 in)
X-ray ability
360° radiolucence
100% radiolucent without any artifacts; in cervical spine range too
Radiolucent area
Normal mode
Reverse mode
1,800 mm x 520 mm (71 in x 20.5 in)
1,650 mm x 520 mm (65 in x 20.5 in)
Attenuation equivalent value Al
max. 1.7 mm (0.06 in.) (without pad), according to EN 60601-1-3
Net weight
Maximum patient weight
approx. 180 kg (397 lbs)
225 kg (496 lbs) (with full longitudinal shift 180 kg)
Transfer - compatible Shuttle
Shuttle 1.6, 2.6, 3.6
TRUMPF Medizin Systeme GmbH + Co. KG
Carl-Zeiss-Straße 7-9 · 07318 Saalfeld · Phone +49 (0) 3671 586
6-41 406 · Fax +49 (0) 3671 586-41 225
E-Mail [email protected] · Homepage www.trum
mpf.com
Christoph Schmotz/ 11/01/2012