ww w.auroralitebank.com 2. Parts SH-224 1 2 Contents 3 4 5 6 7 1. Before use 8 11 2. Parts 3. Function of control panel 4. Specifications 12 CONTINUOUS LIGHTING SYSTEM POWER 5. Maintenance INDOOR USE ONLY 13 6. Trouble shooting Model : SH223, SH224 Output : 1000Ws Supply current : 5A Power factor : 0.98 Ambient temp : Ta 25 C Surface temp : Max.70 C Fuse : 250V F6.3AL MIN OFF MAX VOL. 15 230V~50/60Hz 14 Sunlight is a 1kW Tungsten light. Compact and yet powerful, Sunlight is a good lighting solution useful for a variety of applications such as portrait shooting and video shooting. Without compromising the details of your subject, Sunlight will provide you an excellent lighting just like the sun. 16 17 9 10 1. Before use This light is a very precise piece of photographic equipment. Operation manual must be read thoroughly before use. 1. Input voltage should be checked before use. 2. Do not move or shock the unit when power is on. 3. Connect to the properly functioning grounded 3-pin receptacles only. 4. Attach or detach light modifiers only after halogen lamp is turned off and cooled down. 5. Do not use with a snoot reflector or honeycomb grids, which can cause burning damage due to overheat. 6. Use a softbox made with heat resistant material only. 7. Do not store or use under humid or moist conditions for an extended amount of time. 8. Keep this equipment out of the reach of children. 9. Keep the subject minimum 1m far from the light. 10. Rated maximum ambient temperature is 25°C 11. Do not use with a cracked glass dome. 12. Halogen lamp should be replaced if damaged or thermally deformed. 1 Reflector 10 Tightening screw 2 Glass dome 11 Control panel 3 1kW Halogen lamp 12 Power switch 4 Lamp socket 13 Power control dimmer 5 Front plate 14 Power socket 6 Housing 15 Fuse holder and spare fuse 7 Locking lever 16 Holes for umbrella fixing 8 Tilting bracket 17 Power cord 9 Screw for tilting control 1 2 3. Function of control panel 5. Maintenance To replace a halogen lamp 1 1. Make sure the light is cooled down. 2. Remove glass dome from the light head. Use a clean and soft cloth or wear gloves. 3. Replace a defective halogen lamp with a new one. Touching a lamp with bare hands can 1. Power switch CONTINUOUS LIGHTING SYSTEM shorten the life of lamp and it is recommended to use a clean and soft cloth or wear gloves 2. Power control dimmer 0-100% POWER throughout the process. 3. Power socket AC 230V INDOOR USE ONLY 4. Fuse holder – spare fuse (250V F6.3AL) is included in Model : SH223, SH224 Output : 1000Ws Supply current : 5A Power factor : 0.98 Ambient temp : Ta 25 C Surface temp : Max.70 C Fuse : 250V F6.3AL MIN OFF MAX VOL. To replace a fuse 1. Turn off the light and pull out the power cord 230V~50/60Hz 2. Open up the fuse holder using a driver and remove the fuse. 3. Replace it with a new one 250V F6.3AL 2 3 4 To maintain the light properly 1. Place a protective cap while carrying or when not in use. 4. Specification 2. Dust and strain on the lamp can shorten its life time and drop its color temperature. Clean it up with soft and clean fabric. Model SH-224 Input voltage AC 230V 50Hz or 60Hz Power range Stepless dimming 0 – 1000W Color temperature 3200 ± 100°K Lamp GX6.35 1kW halogen lamp Housing material Die case with Titanic Aluminum Bayonet Aurora S mount Dimensions 24x13x22cm Weight 1kg Cooling fan Included Glass dome Included Accessory included Standard reflector Optional accessory Umbrella, heat resistant softbox, reflectors 6. Trouble shooting Symptom Solution Possible cause Dimming knob failure Replace to a new dimming knob Lamp failure Replace to a new lamp Fuse failure Replace to a new fuse No spinning of cooling fan or big noise Cooling fan malfunction Replace to a new fan No operation No electricityFuse failure Check if power cord is properly connected. Replace to a new fuse 250V F6.3AL Others Please consult with an authorized A/S center, dealer, or manufacturer. No light turns on This product can be modified for better quality and function without prior notice. 8-2 Yeonamro-42 gil, Buk-gu, Daegu 702-835, Rep of Korea Tel. +82 53 384 9874 Fax. +82 53 384 9886 e-mail. [email protected] 3 4
© Copyright 2024 Paperzz