LED PUCK LIGHT KIT INSTRUCTIONS
ledworldlighting.com | ledworld.ca
1-800-387-4081
IMPORTANT INSTRUCTIONS
3.5
12V
Never Nail or use Staples
Never apply weights or walk on strips
KG
WATTS
DC Power
Apply to surface at room temperature. Keep
away from ammable materials. Surface
temperature MAX 40°C (104°F). Don’t install under,
above or near heat sources (i.e. stoves, replaces)
Only power with 12VDC
Regulated Class 2 Driver
LISTED
Safety & Warnings
Please read instructions before using product and SAVE THESE INSTRUCTIONS. Before using this product make sure you have right color, product
(item number) and voltage (printed on product). Check for possibility of damage during shipping. If damaged, or wrong product, do not use.
Disconnect power before installing or using.
Use only with LED World’s 12VDC 45W MD45W12VA dimmable regulated Class 2 power supply. Using with any other type of power supply will void
the limited warranty.
Use only with Regulated Class 2 Type power supply.
Do not attach LED Puck Light to Battery. Not for use in Automobile.
Indoor use, Dry locations. Do not expose LED Puck Light to moisture.
Disconnect power before installing or servicing (at breaker point).
This product is intended to be installed and serviced by a qualied licensed electrician. Install in accordance with the National Electric Code, and local regulations.
Only power with LED World’s 12VDC 45W MD45W12VA dimmable regulated Class 2 power supply.
For Under Cabinet lighting and Under Counter Top Lighting
Wiring Diagram
Dimmer (Optional)
12VDC Dimmable Regulated Driver
120V AC 60Hz
Black Wire
Live HOT
L
N
Strain Relief
24W MD-012-024VT
White Wire
Neutral
Class 2 Power Unit
V- (Black Wire)
Green Wire
Ground
V+ (Red Wire)
Strain Relief
Low Voltage Distributor
(91505)
+
+
Screw Mount
Strain Relief
Strain Relief
LED Puck Lights (Max 12 3.5W LED Puck Light with 45W MD45W12VA Driver)
1/2
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.0 - 02/01/17
Copyright © 2017 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED PUCK LIGHT KIT INSTRUCTIONS
ledworldlighting.com | ledworld.ca
1-800-387-4081
Installation Diagram
Input : 12VDC
Ø 2.20” (56mm)
Surface Mounted LED Puck Light
Input : 12VDC
Input : DC12V
Ø 0.31” (8mm)
20881BR
Ø 0.31” (8mm)
Recessed/Surface Mounted LED Puck Light
2/2
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.0 - 02/01/17
Copyright © 2017 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).