TRAINING REPORT
Name
Date
<DIRECTION>
Watch the display of WS and fill up the blanks below in your brief comments.
Hand up this report forms when you complete fill up.
(Each quiz gives you understanding plant components and plant construction.)
ITEM 1 : Sea Water System ( MD 01 )
QUIZ
YOUR COMMNTS
What is role of SW pump.?
What is role of FW cooler.?
What is role of Filter in High Suction and
Low Suction lines.?
Why is there no Filter in Bottom Suction.?
When do you use High Suction.?
For what is SW recirc. line shut off valve
installed.?
For what is Emergency Bilge suction
installed.?
For what is Direct Emergency Suction
installed.?
What is role of Emergency Fire Pump.?
Why is it’s Sea Suction separated from
suction for Fire Pumps.?
Page 1 of 13
TRAINING REPORT
Name
Date
<DIRECTION>
Watch the display of WS and fill up the blanks below in your brief comments.
Hand up this report forms when you complete fill up.
(Each quiz gives you understanding plant components and plant construction.)
ITEM 2 : Fuel Oil Transfer System ( MD 03 )
QUIZ
YOUR COMMENTS
What is role of Bunker Tanks.?
Why do you heat Bunker Tanks.?
What is role of FO Transfer Pump.?
What is role of Spill Oil Tank.?
ITEM 3 : Fuel Oil Settling Tanks
( MD 04 )
QUIZ
YOUR COMMENTS
What is role of HFO Settling Tanks.?
Why do you heat Settling Tanks.?
For What is the pipe line to Sludge Tank
Installed.?
Page 2 of 13
TRAINING REPORT
Name
Date
<DIRECTION>
Watch the display of WS and fill up the blanks below in your brief comments.
Hand up this report forms when you complete fill up.
(Each quiz gives you understanding plant components and plant construction.)
ITEM 4 : Fuel Oil Service Tanks ( MD 05 )
QUIZ
YOUR COMMENTS
What is role of HFO Service Tanks.?
Why do you heat HFO Service Tanks.?
What is difference between HFO and
MDO.?
ITEM 5 : HFO Separator no. 1 ( MD 06 )
QUIZ
YOUR COMMENTS
Why do you heat HFO.?
What is the type of valve which is used for
Recirc. valve called.?
What is principle of operation in
Separator.?
What is Sludge.?
What is Bowl which is displayed in HFO
Separator 1.?
Page 3 of 13
TRAINING REPORT
Name
Date
<DIRECTION>
Watch the display of WS and fill up the blanks below in your brief comments.
Hand up this report forms when you complete fill up.
(Each quiz gives you understanding plant components and plant construction.)
ITEM 6 : LO Purifier System ( MD 09 )
QUIZ
YOUR COMMENTS
Why do you heat LO.?
What is Gravity Ring.?
What is role of Operating Water Tank.?
ITEM 7 : Fresh Water System. ( MD 10 )
QUIZ
YOUR COMMENTS
What is role of Exp. Tank.?
What is role of HTFW pump.?
What is role of LTFW pump.?
What is role of FW Pre-heater.?
For what is HTFW vent valve installed.?
Page 4 of 13
TRAINING REPORT
Name
Date
<DIRECTION>
Watch the display of WS and fill up the blanks below in your brief comments.
Hand up this report forms when you complete fill up.
(Each quiz gives you understanding plant components and plant construction.)
I
ITEM 7 : ME Fuel Oil System
( MD 11 )
QUIZ
YOUR COMMENTS
What is role of FO Heater.?
For what is ME FO steam tracing
I installed.?
What is role of Vent Tank.?
What is role of Booster pump.?
For what are Air Cushions installed.?
ITEM 8 : ME Lubrication Oil System ( MD 12 )
QUIZ
YOUR COMMENTS
What is role of Lubricator.?
What is Crosshead.?
For what is LO supplied to Piston.?
What is role of Service Tank.?
Page 5 of 13
TRAINING REPORT
Name
Date
<DIRECTION>
Watch the display of WS and fill up the blanks in your brief comments.
Hand up this report forms when you complete fill up.
(Each quiz gives you understanding plant components and plant construction.)
I
ITEM 9 : ME Turbocharger System 1 ( MD 13 )
QUIZ
YOUR COMMENTS
What is role of Aux. Air Blower.?
What is role of turbo charger.?
For what are shut off dampers installed
in exhaust gas line.?
What is role of Exhaust Receiver.?
Why do you cool the supper charged air
with Air coolers.?
ITEM 10 : ME Turbocharger System 2 ( MD 14 )
QUIZ
YOUR COMMENTS
Why is TBCH LO line separated from
ME LO line.?
ITEM 11 :
ME Control System ( MD 19 )
QUIZ
YOUR COMMENTS
What is role of Governor.?
What is Thermal Load Program.?
What is Over speed.?
Page 6 of 13
TRAINING REPORT
Name
Date
<DIRECTION>
Watch the display of WS and fill up the blanks below in your brief comments.
Hand up this report forms when you complete fill up.
(Each quiz gives you understanding plant components and plant construction.)
ITEM 12 : ME Local Control ( MD 20 )
QUIZ
YOUR COMMENTS
What is role of Turning Gear.?
What is Slow Turn.?
What does it mean by Finish With
engine.?
What does it mean by ECR Stand By.?
What does it mean by At Sea.?
ITEM 13 : ME Cylinder no 1
( MD 21 )
QUIZ
YOUR COMMENTS
For what is FO circulation line installed.?
For what is Indicator Cock installed.?
For what is Piston Rod Gland installed.?
What is Indicated Power.?
What is Mean Indicated Pressure.?
Page 7 of 13
TRAINING REPORT
Name
Date
<DIRECTION>
Watch the display of WS and fill up the blanks below in your brief comments.
Hand up this report forms when you complete fill up.
(Each quiz gives you understanding plant components and plant construction.)
ITEM 14 : Stern Tube System ( MD 54 )
QUIZ
YOUR COMMENTS
Why are two Gravity Tanks installed.?
Why do you need cooler.?
(Why is LO heated.?)
ITEM 15 :
Compressed Air System
( MD 60 )
QUIZ
YOUR COMMENTS
Why do you need Air coolers.?
What is the type of valve which is used
For drain valve of Air cooler called. ?
ITEM 16 : Distilling Plant ( MD 61 )
QUIZ
YOUR COMMENTS
What is role of ejector on right side.?
What is role of ejector on left side.?
Why do you need to make a vacuum.?
Page 8 of 13
TRAINING REPORT
Name
Date
<DIRECTION>
Watch the display of WS and fill up the blanks below in your brief comments.
Hand up this report forms when you complete fill up.
(Each quiz gives you understanding plant components and plant construction.)
ITEM 17 : Bilge Wells ( MD 62 )
QUIZ
YOUR COMMENTS
What is Bilge.?
What is role of Bilge Well.?
What is Incinerator.?
For What is Shore Connection installed.?
ITEM 18 : Bilge Separator
( MD 63 )
QUIZ
YOUR COMMENTS
What is Bilge Separator.?
For what is Oil ppm Detector installed.?
What is an abbreviation of ppm.?
Page 9 of 13
TRAINING REPORT
Name
Date
<DIRECTION>
Watch the display of WS and fill up the blanks in your brief comments.
Hand up this report forms when you complete fill up.
(Each quiz gives you understanding plant components and plant construction.)
ITEM 19 : Refrigeration System ( MD 64 )
QUIZ
YOUR COMMENTS
What is role of Compressor in Ref. cycle.?
What is role of Condenser in Ref. cycle.?
What is role of Receiver in Ref. cycle.?
What is role of Expansion valve in Ref.
cycle.?
What is role of Evaporator in Ref. cycle.?
What is role of Fans.?
ITEM 20 : Electric Power Plant ( MD 70 )
QUIZ
YOUR COMMENTS
What is Breaker connecting to BUS BAR
from Generator called formally.?
What does it mean by Wrong Phase in
shore line.?
What is Magn.(Magnetizer).?
Page 10 of 13
TRAINING REPORT
Name
Date
<DIRECTION>
Watch the display of WS and fill up the blanks below in your brief comments.
Hand up this report forms when you complete fill up.
(Each quiz gives you understanding plant components and plant construction.)
I
ITEM 21 : Diesel Generator no. 1 ( MD 71 )
QUIZ
YOUR COMMENTS
What is role of LO Priming pump.?
Why does DG have self driven pumps.?
ITEM 22 : Steam Generator Plant ( MD 80 )
QUIZ
YOUR COMMENTS
What is role of Economizer.?
What is role of Superheater.?
What is role of Circulating pump.?
For what is return line to FW Tank
from the delivery side of FW pump
installed.?
What is role of Inspection Tank.?
Page 11 of 13
TRAINING REPORT
Name
Date
<DIRECTION>
Watch the display of WS and fill up the blanks in your brief comments.
Hand up this report forms when you complete fill up.
(Each quiz gives you understanding plant components and plant construction.)
ITEM 23 : Oil Fired Boiler
( MD 81 )
QUIZ
YOUR COMMENTS
What is role of Burner Fan.?
What is role of Burner pump.?
What is Smoke indicator.?
What is Air Ratio.?
ITEM 24 : Exhaust Boiler
( MD 82 )
QUIZ
YOUR COMMENTS
What is role of Exhaust Gas Damper.?
What is role of Sootblowing.?
What is Saturated Steam.?
What is the temperature of Saturated
Steam from oil fired boiler
approximately.?
Why is Superheater located lowest
position in the Exhaust Boiler.?
Page 12 of 13
TRAINING REPORT
Name
Date
<DIRECTION>
Watch the display of WS and fill up the blanks below in your brief comments.
Hand up this report forms when you complete fill up.
(Each quiz gives you understanding plant components and plant construction.)
ITEM 25 : Steam Condenser ( MD 85 )
QUIZ
YOUR COMMENTS
Why do you make vacuum in Steam
Condenser.?
For what is Vent line installed on the
suction side of Condensate pump.?
ITEM 26 : Turbo Generator ( MD 86 )
QUIZ
YOUR COMMENTS
Why do you supply Turbo Generator
Turbine with superheated steam.?
What kind of Sealing is used for steam
Sealing.?
Why do you need this type of Sealing.?
ITEM 27 : Auto Chief – Main Engine Control ( MD 104 )
QUIZ
YOUR COMMENTS
What is VIT.?
What is VEC.?
What does it mean by Wrong Way.?
Page 13 of 13