Clemson University College of Engineering and Science
RESUME
John David DesJardins, Ph.D.
PERSONAL DATA
Assistant Professor of Bioengineering
Clemson University, Department of Bioengineering
301 Rhodes Engineering Research Center
Clemson, South Carolina, 29634-0905, USA
Ph: 864 656-4178 Fax: 864 656-4466 Email: [email protected]
EDUCATION
Ph.D., Clemson University, 2006, Bioengineering (Biotribology)
M.S., University of Pittsburgh, 1994, Mechanical Engineering (Solid Mechanics
and Biomechanics)
B.S., Carnegie-Mellon University, 1992, Mechanical Engineering (Biomedical
Option)
PROFESSIONAL EXPERIENCE
University of South Carolina School of Medicine-Greenville, South Carolina
2012-Present, Clinical Assistant Professor, Department of Orthopaedic
Surgery
Medical University of South Carolina, Charleston, South Carolina
2011-Present, Adjunct Assistant Professor, Department of Orthopaedic
Surgery
Clemson University, Clemson, South Carolina
2008-Present, Assistant Professor of Bioengineering
2006-2008, Senior Faculty Lecturer in Bioengineering
2003-2006, Graduate Student, Department of Bioengineering
1998-2006, Faculty Research Associate, Department of Bioengineering
University College London, Stanmore, England
1998, Research Engineer, Centre for Biomedical Engineering
1997-1998, Visiting Research Associate, Centre for Biomedical
Engineering
Johns Hopkins University, Baltimore, Maryland
1995-1998, Research Engineer, Orthopaedic Biomechanics Research
Laboratory
University of Pennsylvania, Philadelphia, Pennsylvania
1994-1995, Radiation Safety Technician, Environmental Health and
Radiation Safety
1994-1995, Bioengineering Contractor, McKay Orthopaedic Laboratory
Allegheny-Singer Research Institute, Pittsburgh, Pennsylvania
1994, Assistant Engineer, Biomechanics Research Laboratory
1992-1994, Graduate Research Assistant, Biomechanics Research
Laboratory
1991-1992, Undergraduate Research Intern, Biomechanics Research
Laboratory
1990-1991, Undergraduate Research Intern, Sleep Disorders Laboratory
University of Pittsburgh in Pittsburgh, Pennsylvania
1992-1994, Graduate Student, Mechanical Engineering Department
Carnegie-Mellon University in Pittsburgh, Pennsylvania
1990, Undergraduate Assistant, Robotics Institute
1989, Undergraduate Assistant, Computer Center
Naval Surface Weapons Center in Indian Head, Maryland
1987-1989, Student Technician, Energetic Materials Division
CONSULTING EXPERIENCE
Hospital for Special Surgery, Orthopaedic Research Laboratory, NY, NY
2001, 2007, 2009
Instructed staff and maintained knee wear testing simulation equipment
DJO Surgical, Orthopaedics Division, Austin, TX
2008-Present
Consulted on evaluation of knee implant wear testing and simulation
results
Medical University of South Carolina, Department of Orthopaedics, Charleston,
SC
2002-Present
Consulted on design of biomechanical studies and experimental testing
Zimmer Orthopaedics, Ltd., Winterthur, Switzerland
2000-2007
Consulted on knee joint mechanics and wear testing simulation
methodologies
Marshall University School of Medicine, Department of Orthopaedics,
Charleston, WV
2006, 2008
Trained staff in knee joint mechanics and use of knee simulation
equipment
Stryker-Howmedica-Osteonics, Orthopaedics Division, Mahwah, NJ
2001
Instructed staff and maintained knee wear testing simulation equipment
Biomet Orthopeadics, Warsaw, IN
2000
Consulted on wear testing simulation data processing software
development
MEMBERSHIPS
Member, American Society of Mechanical Engineers, ASME (1992-1995, 2011Present)
Member, American Society of Biomechanics, ASB (1992-2002)
Member, International Society for Biomechanics, ISB (2008)
Member, Society For Biomaterials, SFB (2000-Present)
Member, Orthopaedic Research Society, ORS (1992-Present)
Member, Society of Tribology and Lubrication Engineering, STLE (2006-2007)
Member, American Society for Engineering Education, ASEE (2007-Present)
Member, Biomedical Engineering Society, BMES (2004, 2010-Present)
Student Affairs Committee: 2011-Present
PROFESSIONAL ACTIVITIES
Scientific Journal Reviewer
Acta Biomaterialia, 2009-Present
Journal of Biomechanics, 2003-Present
Clinical Orthopaedics and Related Research, 2004-Present
Journal of BioRheology, 2004-Present
Journal of Orthopaedic Research, 2004-Present
Journal of Engineering in Medicine, Part H, 2006-Present
Journal of WEAR, 2008-Present
Journal of Biomedical Materials Research, 2008-Present
Computer Methods and Programs in Biomedicine, 2010-Present
CRC Press/Taylor & Francis Group, LLC., Bioengineering, Biological
Engineering, Mechanical Engineering, 2004-Present
Society and Conference Work
Orthopaedic Research Society
Abstract Reviewer, Gait, Wear and Joint Mech. Divisions, 2008
Abstract Reviewer, Wear, 2011
Session Moderator, Knee Arthroplasty, 2012
National Collegiate Inventors and Innovators Alliance (NCIIA)
Attendee of TeachingLab and Faculty Assistant of IdeaLab,
Northwestern University, Evanston, IL, June 27-30, 2011
2011 BMEStart Design Competition Reviewer
2011 Participant in “Design Innovation Best Practices” Meeting at
the BMES Conference, October 13, 2011
2011 NCIIA 16th Annual Conference Paper Reviewer
Society for Biomaterials
Abstract Reviewing Committee, Wear Division 2008
Abstract Reviewing Committee, Biomaterials 2010
Southeast Biomedical Engineering Career Conference (SEBECC)
Poster Judge, October 29, 2010, Clemson, SC
American Society of Engineering Education
Abstract and Paper Reviewer (DEED), 2011
Biomedical Engineering Society
Abstract Reviewer, Orthopaedic Rehabilitation Division, 2010
Session Moderator, Orthopaedic Rehabilitation Division, 2010
Student Chapter Report Award Reviewer, 2011
Granting Agencies
AO Foundation
Scientific Reviewer, 2009-Present
National Science Foundation
Panel Reviewer, 2009-Present
PUBLICATIONS
Books and Monographs
1. J.D. DesJardins, H. Haider, J. Perry, The Stanmore Knee Simulator, 4-Sation
Model KC: Installation, Operation and Maintenance Manual; Chapters 4, 8 and
9. (1998) University College London, Centre for Biomedical Engineering,
Stanmore, Middlesex, England.
Refereed Journal Publications
1. M.E. Baratz, J. Des Jardins, D.D. Anderson, J.E. Imbriglia, Displaced IntraArticular Fractures of the Distal Radius: The Effect of Fracture Displacement on
Contact Stresses in a Cadaver Model. Journal of Hand Surgery,21A(2):Volume 3,
1996.
2. J.J. McElroy, E.A. Morgan, J.D. DesJardins, D.D. Anderson, R.N. Steensen, The
Effect of Intercondylar Notchplasty on the Patellofemoral Articulation. The
American Journal of Sports Medicine, Volume 24, Number 6, 1996.
3. Siddiqi N, Gazzani F, Des Jardins J, Chao EY., The use of a robotic device for
gait training and rehabilitation, Stud Health Technol Inform. Volume 39, pp.
440-9, 1997
4. B.A. MacWilliams, J. DesJardins, D.R. Wilson, J. Romero, E.Y.S. Chao, A
Repeatable Alignment Method and Local Coordinate Description For Knee Joint
Testing and Kinematic Measurement. Journal of Biomechanics, Volume 31,
Number 10, pp. 946-950, 1998.
5. Klimkiewicz JJ, Williams GR, Sher JS, Karduna A, Des Jardins J, Iannotti JP,
The acromioclavicular capsule as a restraint to posterior translation of the
clavicle: A biomechanical analysis. Journal of Shoulder and Elbow Surgery,
Volume 8, Issue 2, pp. 119-124, 1999.
6. J.J. Elias, J.D. DesJardins, A.F. Faust, S.A. Lietman, E.Y.S. Chao, Size and
Position of a Single Condyle Allograft Influences Knee Kinematics. Journal of
Orthopaedic Research, Vol. 17, No. 4, 1999.
7. B.A. MacWilliams, D.R. Wilson, J.D. DesJardins, J. Romero, E.Y.S. Chao,
Hamstrings Cocontraction Reduces Internal Rotation, Anterior Translation, and
Anterior Cruciate Ligament Load in Weightbearing Flexion. Journal of
Orthopaedic Research, Vol. 17, No. 6, pp. 817-22, 1999.
8. J.D. Des Jardins, H. Haider, P.S. Walker, The use of a force-controlled dynamic
knee simulator to quantify the mechanical performance of total knee replacement
designs during functional activity. Journal of Biomechanics, Vol. 33/10, pp. 12311242, 2000.
9. L.C. Benson, J.D. DesJardins, T. Pace, M. LaBerge, Effects of In Vitro Wear of
Machined and Molded UHMWPE Tibial Inserts on TKR Kinematics. Journal of
Biomedical Materials Research (Applied Biomaterials), Vol. 58, No. 5, pp. 496504, 2001.
10. L.C. Benson, J.D. DesJardins, M.K. Harman, M. LaBerge Effect of Stair Descent
Loading on Ultra-high Molecular Weight Polyethylene Wear in a Forcecontrolled Knee Simulator.
Proceedings of the Institute of Mechanical
Engineering, Part [H], 216(6): pp.409-18, 2002.
11. M.R. Gevaert, M. LaBerge, J.M. Gordon, J.D. DesJardins , The Quantification of
Physiologically Relevant Cross Shear Wear Phenomena on Orthopaedic Bearing
Materials Using a Novel Wear Testing Machine, Journal of Tribology, Vol. 127,
No. 4, pp. 740-749, 2005.
12. A. Aurora, J.D. DesJardins, P.F. Joseph, M. LaBerge, Effect of Lubricant
Composition on the Fatigue Properties of Ultra High Molecular Weight
Polyethylene (UHMWPE) For Total Knee Replacement, Proceedings of the
Institute of Mechanical Engineering, Part [H], 220(4): pp. 541-51, 2006.
13. J.D. DesJardins, A. Aurora, S.L. Tanner, T.B. Pace, D. M. LaBerge, Development
of a clinically relevant TKR simulator lubricant, Proceedings of the Institute of
Mechanical Engineering, Part [H], 220(5), pp. 609-623, 2006.
14. L.M. Gustafson, J.D. DesJardins, L.C. Benson, M. LaBerge, Quantification of
Dynamic Tibiofemoral Contact in a Total Knee Replacement During Simulated
Daily Activity. MUSC Orthopaedic Journal, Vol. 9, pp. 12-19, 2006.
15. H. Haider, P.S. Walker, J.D. DesJardins, G.W. Blunn, Effects of Pateint and
Surgical Alignment Variables on Kinematics in TKR Simulation Under ForceControl. Journal of ASTM International, Vol. 3, No. 10, pp. 1-14, Nov/Dec 2006.
16. J.D. DesJardins, A New Spirit of Collaboration: The Clemson University –
Medical University of South Carolina Connection. Invited Editorial in the MUSC
Orthopaedic Journal, Vol. 10, pp. 5-7, June 2007.
17. T.C. Wind, W.R. Barfield, T.R. Barco, J.D. DesJardins, J.A. Glaser, Intralaminar
Screw Positioning, Placement and Pull-Out Force in the Second Cervical
(C2)Vertebral Body. MUSC Orthopaedic Journal, Vol. 10, pp. 27-32, June 2007.
18. M.S. Lepine, W.R. Barfield, J.D. DesJardins, L.A. Hartsock, Biomechanical
Assessment of Fixation Methods for Repair of Pauwel’s Type III Femoral Neck
Fractures at Measured Fracture Moments. MUSC Orthopaedic Journal, Vol. 10,
pp. 57-64, June 2007.
19. J.D. DesJardins, S.A. Banks, T. Pace, M. LaBerge, A Direct Comparison of
Patient and Simulator Total Knee Replacement Kinematics. Journal of
Biomechanics Vol. 40, Issue 15, pp. 3458–3466, 2007.
20. J.D. DesJardins, B. Burnikell, M. LaBerge, UHMWPE Wear Performance
Against Roughened Oxidized Zirconium and CoCr Femoral Knee Components,
Wear, Vol. 264, Issue 3-4, pp.245-256, 2008.
21. S.R. Shaha, J.D. DesJardins, R.W. Blob, Antler stiffness in caribou (Rangifer
tarandus): testing variation in bone material properties between males and
female, Zoology, Volume 111, pp. 476–482, 2008.
22. M.K. Harman, J.D. DesJardins, L.C. Benson, S.A. Banks, M. LaBerge, W.A.
Hodge, Comparison of polyethylene tibial insert damage from in vivo function
and in vitro wear simulation, Journal of Orthopaedic Research, Volume Apr-27,
Issue 4, pp.540-548, 2009.
23. C. Marquez-Barrientosa, S.A. Banks, J.D. DesJardins and B.J. Fregly, Increased
Conformity Offers Diminishing Returns for Reducing Total Knee Replacement
Wear, Journal of Biomechanical Engineering, Volume 132, Issue 2, pp. 021007,
2010.
24. Spinelli, M., Affatato S., Harman, M., DesJardins, J.D., Bi-Unicondylar Knee
Prosthesis Functional Assessment Utilizing Force-Control Wear Testing,
Proceedings of the Institute of Mechanical Engineering, Part [H], Volume 224,
No.7, pp. 813-821, 2010. DOI 10.1243/09544119JEIM726
25. M.S. Lepine, W.R. Barfield, J.D. DesJardins, L.A. Hartsock, The Effect of
Moment Arm Length on High Angled Femoral Neck Fractures (Pauwels’ III).
Journal of Biomedical Science and Engineering, Volume 3, pp 448-453, 2010.
26. Vaidya, S., E. Alvarez, J. Vinciguerra, D.A. Bruce, DesJardins, J.D., Reduction of
Total Knee Replacement Wear with Vitamin E blended highly cross linked
UHMWPE. Journal of Engineering in Medicine, Vol 1, January 2011.
27. M. Wabler, E. Alvarez, J.D. DesJardins, Exploration, Development, and
Implementation of the Retrieval of Explants Program in Orthopaedics (REPO).
Proceedings of the Annual Meeting of the American Society for Engineering
Education Conference and Exposition, Paper #AC 2010-1700, June 20-23, 2010,
Louisville, KY.
28. E. Alvarez, S. Saville, O. Mefford, J.D. DesJardins, The use of Conference
preparatory principles and practices (writing and presentation skills) to teach
interdisciplinary laboratory courses. Proceedings of the Annual Meeting of the
American Society for Engineering Education Conference and Exposition,
Paper#AC 2010-1621, June 20-23, 2010, Louisville, KY
29. R. Hutchison, J.D. DesJardins, L. Benson. The use of situated cognition and
constructivist Theories to Teach Movement Science in Biomechanics. Proceedings
of the Annual Meeting of the American Society for Engineering Education
Conference and Exposition, Paper #AC 2010-1621, June 20-23, 2010, Louisville,
KY.
30. S. Joshi, R. Rusly, J. Ju; L. Berglind, J. Summers, J.D. DesJardins, Experimental
Damage Characterization of Hexagonal Honeycombs Subjected to In-Plane
Shear Loading, ASME 2010 International Design Engineering Technical
Conferences (IDETC) and Computers and Information in Engineering Conference
(CIE), Paper #28549, August 15-18, 2010, Montréal, Canada.
31. S. Bielby, T. Warrick, D. Benson, R. Brooks, E. Skewes, E. Alvarez, J.D.
DesJardins. The Effect of Cut-Line Location on the 3D Rotational Stiffness of an
Ankle Foot Orthosis. Journal of Prosthetics & Orthotics: October 2010 - Volume
22 - Issue 4 - pp 204-210
32. R.J. Rusly, J.D. DesJardins, Single Flexion-Axis Selection Influences Femoral
Component Alignment and Kinematics during Knee Simulation. Proceedings of
the Institute of Mechanical Engineering, Part [H], Journal of Engineering in
Medicine,Volume 225 Issue 8 August 2011 pp. 762 - 768. DOI
10.1177/0954411911400534
33. C.S. Cummings, E.M. Lucas, T.M. Kieu, J.A. Marro, and J.D. DesJardins, The
Effects of Proton Radiation on UHMWPE Material Properties for Total Joint
Replacements, Advances in Space Research, Published online: August 25, 2011.
DOI: 10.1016/j.asr.2011.07.009.
34. N. Mitchell, C. Eljach, B. Lodge, J.D. DesJardins, M. Kennedy, Single and
Reciprocal Friction Testing of Micropatterned Surfaces for Orthopaedic Device
Design, Journal of the Mechanical Behavior of Biomedical Materials (JMBBM),
In Press: DOI: 10.1016/j.jmbbm.2011.08.022
35. E. Alvarez, J. Vinciguerra, J.D. DesJardins, Frictional Performance of Ultra
Polish CoCr Surface for Orthopaedic Bearing Applications. Journal of Tribology
International, In Press: DOI: 10.1016/j.triboint.2011.11.002
36. W.R. Barfield, Y. An, J.D. DesJardins, The Potential of Magnesium Alloy Use in
Orthopaedic Surgery, Accepted, Current Orthopaedic Practice, December 9,
2011.
Papers In Submission, Revision
1. B.L. Roach, J.B. Matheny, R.W. Blob, J.D. DesJardins, Quantification and
analysis of shear-plane kinematics in a total knee replacement during simulation
Submitted to the Journal of Engineering in Medicine, November 2011.
2. T.B. Pace, K.A. Rusaw, J.D. DesJardins, L.J. Minette, B.R. Shirley, R.G. Snider,
Metal-on-Metal Hip Retrieval Analysis: A Case Report, Journal of Bone and Joint
Surgery Case Connector, Submitted September 2011.
3. T.B. Pace, K. Keith, E. Alvarez, B. Snider, J.D. DesJardins, Comparison of
Conventional Polyethylene Wear and Signs of Cup Failure in Two Similar Total
Hip Designs, Submitted to the Journal of Surgical Orthopedic Advances,
November 2011.
4. J.T. Kim, M. Zilkoski, R. Rusly, K. Fruscello, T. Bacro, J. Desjardins, W.
Barfield, W. Mckibbin, Separation of Bovine Achilles Tendon Ends Repaired
With Krackow and Modified Mason-Allen Technique Under Cyclic Loading: A
Biomechanical Study, Submitted to the Foot and Ankle International Journal, June
2011.
5. M. Suri, S.B. Singleton, D.J. Wyland, M. McDonough, P. Boatwight, J.D.
DesJardins, J.J. Rodrigo, Complete Hole Placement with Microfracture Improves
Cartilage Repair as Compared to Limited Central Hole Placement, Submitted to
the American Journal of Sports Medicine, November 2011.
6. H.M. Cash, M.E. Elpers, M.E. Wabler, E. Alvarez, F.R. Voss, J.D. DesJardins,
Comparative Analysis of Retrieved Genesis II UHMWPE Articulating Against
OxZr vs. CoCr Femoral Components, Submitted to the Journal of Arthroplasty,
February 2012.
Papers in Preparation
1.
J. Hemmer, J.D. DesJardins, M. Matthews, M. Drews, M. LaBerge, Wear and
mechanical testing of supercritical carbon dioxide sterilized UHMWPE, In
Preparation for the Journal of Biomaterials Research, September 2008.
2.
A.C. Clark, J.D. DesJardins, T.B. Pace, M. LaBerge, Measurement of Dynamic
Contact Area and Lubrication Modes in a Highly Conforming and Standard
Conforming Tibial Insert Using Polymeric Doping Technology, In Preparation for
the Journal of Engineering in Medicine, September 2008.
3.
Harman, M., Spinelli, M., Affatato S., DesJardins, J.D., Viceconti, M., Preclinical assessment of UKR: Comparison of explanted prostheses with knee joint
wear simulations (DC and FC), Comparison of simulated implants (both DC and
FC) and retrieved ones. In Preparation for the J Orthop Res (J Biomed Mat Res Appl)
4.
Spinelli, M., DesJardins, J.D., Harman, M., Affatato S., Objective comparison of
displacement-control (DC) and FC UKR wear simulation, In Preparation for the
Journal of Wear
7.
J. Matheny, B. Roach, M. Spinelli, R. Blob, J.D. DesJardins. High Speed Video
Analysis To Quantify Contact Kinematics in UKR Simulation. In preparation for
Clinical Orthopaedics and Related Research.
8.
C.E. Golightly, E.M. Lucas, E.E. Sloan, J.D. DesJardins, The Effect of ASTM F2003 Accelerated Aging of UHMWPE on Specimen Weight Change, In
Preparation to the
9.
C.J. Wright-Walker, F. Alexis, J.D. DesJardins, M. LaBerge, Tribological
Evaluation of a Drug Enriched Ultra-High Molecular Weight Polyethylene for
Enhanced Total Joint Replacement Bearing Surface Functionality, In preparation
to the ???
10.
T.J. Warrick, S.A. Bielby, J. D. DesJardins, Quantitative Analysis of a Novel
Ankle Foot Orthosis Trimline Measurement Technique, In preparation to the
journal of orthotics and prosthetics
11.
*Roach, McKee, Peripheral Vision
12.
Cole, Hippotherapy
13.
M.E. Elpers, E. Alvarez1, H.M. Cash, M.E. Wabler, J.D. DesJardins, NexGen
Posterior Stabilized Assessment of Damage Scoring and Roughness: A
Comparative Analysis of Damage to Retrieved Femoral and Tibial NexGen PS
Components, In preparation to the Journal of Arthroplasty
14.
E.M.Lucas, F.R. Voss, K.J. Chillag, J.D. DesJardins, Case Report: Clinical
Etiologies in the Loss of Knee Function, In preparation to
15.
G.P. Colbath, Q.K. Kang, X. Li, B.R. Whatley, V. Beachley, P.C. Chou, J.D.
DesJardins, M. Kindy, X. Wen, Augmentation of Rat Rotator Cuff Repairs Using
A Bioengineering Approach And Myostatin Inhibitors
Conference Proceedings (National/International Peer Reviewed)
1.
2.
3.
4.
5.
D.D. Anderson, J.D. Des Jardins, T.A. Mutschler, G.M. Ferguson, Radiographic
Evaluation of Acetabular Orientation in Total Hip Arthroplasty. Proceedings of
The Surgery of the Acetabulum and Pelvis: An International Consensus,
Founding Meeting, October 11-15, 1992, Pittsburgh, Pennsylvania.
M.E. Baratz, J.D. Des Jardins, D.D. Anderson, J.E. Imbriglia, Contact stresses in
the distal radius following displaced fractures of the lunate fossa. Proceedings of
the 48th Annual Meeting of the American Society for Surgery of the Hand, 1993,
Kansas City, Missouri.
M.E. Baratz, J.D. Des Jardins, D.D. Anderson, J. Imbriglia, Displaced Fractures
of the Distal Radius: The Effect of Joint Surface Incongruities on Intra-articular
Contact Stresses. Proceedings of the 39th Annual Meeting of the Orthopaedic
Research Society (ORS), February 15-18, 1993, San Francisco, California.
J.D. Des Jardins, M.E. Baratz, D.D. Anderson, J. Imbriglia, The Quantification of
Intra-articular Contact Stresses in Displaced Fractures of the Distal Radius.
Proceedings of the 17th Annual Meeting of the American Society of
Biomechanics, October 21-23, 1993, Iowa City, Iowa.
J.D. Des Jardins, M.E. Baratz, D.D. Anderson, J. Imbriglia, Displaced Fractures
of the Distal Radius: The Effect of Joint Surface Incongruities on Intra-articular
Contact Stresses. Proceedings of the 13th Southern Biomedical Engineering
Conference, Biomedical Engineering Recent Developments, April 16-17, 1994,
Washington, D.C.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
J.D. Des Jardins, T.E. Daniel, M.E. Baratz, D.D. Anderson, J. Imbriglia, Changes
in Carpal Kinematics with Displaced Intra-Articular Fractures of the Distal
Radius. Proceedings of the 2nd World Congress of Biomechanics, July 10-15,
1994, Amsterdam, The Netherlands.
J.D. Des Jardins, T.E. Daniel, D.D. Anderson, M.E. Baratz, J.E. Imbriglia,
Changes in Carpal Kinematics with Displaced Intra-Articular Fractures of the
Distal Radius. Proceedings of the 1994 International Mechanical Engineering
Congress and Exposition ASME Winter Annual Meeting, Advances in
Bioengineering 1994, Vol. 28, pg. 357-358, November 6-11, 1994, Chicago,
Illinois.
T.E. Daniel, J.D. Des Jardins, D.D. Anderson, M.E. Baratz, Carpal kinematics in
displaced "die-punch" fractures of the distal radius, American Society for Surgery
of the Hand, 1994, Cincinatti, Ohio.
J.D. Des Jardins, M.E. Baratz, D.D. Anderson, J.E. Imbriglia, The Quantification
of Intra-articular Contact Stresses in Displaced Fractures of the Distal Radius,
Journal of Biomechanics 27(5):600, 1994.
M.E. Baratz, T.E. Daniel, J.D. Des Jardins, D.D. Anderson, J. Imbriglia, Changes
in Wrist Mechanics Resulting From Displaced Intra-Articular Fractures of the
Distal Radius. Transactions of the 62nd Annual Meeting of the American
Academy of Orthopaedic Surgeons (AAOS), February 18-21, 1995, New Orleans,
LA.
T.E. Daniel, J.D. Des Jardins, D.D. Anderson, M.E. Baratz, J. Imbriglia, Changes
in Carpal Kinematics with Displaced Intra-Articular Fractures of the Distal
Radius. Proceedings of the 2nd Triennial Wrist Biomechanics Symposium, 1995
Meeting of the American Society for Surgery of the Hand, 1995.
D.R. Wilson, B.A. MacWilliams, J.D. Des Jardins, E.Y.S. Chao, In-Vitro
Simulation of Knee Joint Kinematics. Proceedings of the 1996 ASME Mechanics
and Materials Conference, June 12-14, 1996, Baltimore, Maryland.
D.R. Wilson, B.A. MacWilliams, J.D. Des Jardins, E.Y.S. Chao, In-Vitro
Simulation of Knee Joint Mechanics for the Validation of Biomechanical Models.
Proceedings of the 1996 International Mechanical Engineering Congress &
Exposition, November 17-22, 1996, Atlanta, Georgia.
N. Siddiqi, F. Gazzani, J.D. Des Jardins, E.Y.S. Chao, The Use of Robotic Device
For Training & Rehabilitation. Proceedings of the 1997 Meeting of Medicine
Meets Virtual Reality:5, January 22-25, 1997, San Diego, California.
J.D. Des Jardins, B.A. MacWilliams, D.R. Wilson, E.Y.S. Chao, The In-Vitro
Assessment of Knee Joint Kinematics Under Physiologic Loading. Proceedings of
the 43rd Annual Meeting of the ORS, Paper #260, February 9-13, 1997, San
Francisco, California.
D.R. Wilson, B.A. MacWilliams, J.D. Des Jardins, E.Y.S. Chao, Effects of
Hamstrings CoContraction on Tibial Position. Proceedings of the 43rd Annual
Meeting of the ORS, Poster#724, February 9-13, 1997, San Francisco, California.
J.D. Des Jardins, J.J. Elias, A.F. Fuast, P. Shih, F.J. Frassica, E.Y.S. Chao,
Influence of Allograft Size and Position on Knee Kinematics. Proceedings of the
Annual Meeting of the International Society on Limb Salvage (ISOLS),
September 10-12, 1997, New York, New York.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
A.M. Bevilacqua, J.D. Des Jardins, D.R. Heekin, A.F. Faust, J.J. Elias, S. Yang,
P.Rullkoetter, E.Y.S. Chao, The Effect of of Tibial Tray Malrotation on Knee
Kinemaitcs in Total Knee Arthroplasty Proceedings of the 10th Annual
Symposium of the International Society for Technology in Arthoplasty (ISTA),
September 25-27, 1997, San Diego, California.
A.M. Bevilacqua, J.D. Des Jardins, D.R. Heekin, A.F. Faust, J.J. Elias, S. Yang,
P. Rullkoetter, E.Y.S. Chao, The Effect of of Tibial Tray Malrotation on Knee
Kinemaitcs in Total Knee Arthroplasty. Proceedings of the Meeting of the Society
of Military Orthopaedic Surgeons (SOMOS), October 6-10, 1997, Lake Placid,
New York.
A.M. Bevilacqua, J.D. Des Jardins, D.R. Heekin, A.F. Faust, J.J. Elias, P.
Rullkoetter, E.Y.S. Chao, The Effect of of Tibial Tray Malrotation on Knee
Kinemaitcs in Total Knee Arthroplasty. Proceedings of the 31st Annual Residents
Conference of the American Orthopaedic Association (AOA), February 19-22,
1998, Sacramento, California.
J.D. Des Jardins, A.F. Faust, J.J. Elias, S. Lietman, E.Y.S. Chao, The Influence of
Segmental Femoral Allograft Size and Position on Knee Kinematics. Proceedings
of the 44th Annual Meeting of the ORS, March 16-19, 1998, New Orleans,
Lousiana.
J.D. Des Jardins, B.A. MacWilliams, D.R. Wilson, S. Kato, J.J. Elias, E.Y.S.
Chao, The Kinematic Effects of Hamstring Cocontraction on Intact and ACL
Deficient Knees. Proceedings of the 44th Annual Meeting of the ORS, March 1619, 1998, New Orleans, Lousiana.
A.M. Bevilacqua, J.D. Des Jardins, D.R. Heekin, A.F. Faust, J.J. Elias, E.Y.S.
Chao, The Effect of of Tibial Tray Malrotation on Knee Kinemaitcs in Total Knee
Arthroplasty. Proceedings of the 44th Annual Meeting of the ORS, March 16-19,
1998, New Orleans, Lousiana.
M. Fung, S. Kato, J.D. Des Jardins, E.G. McFarland, E.A. Zerhouni, E.Y.S. Chao,
Three-Dimensional Passive In-Vitro Shoulder Motion During Arm Elevation .
Proceedings of the 44th Annual Meeting of the ORS, March 16-19, 1998, New
Orleans, Lousiana.
S. Kato, M. Fung, J.D. Des Jardins, E.G. McFarland, E.A. Zerhouni, M. Abe,
E.Y.S. Chao, Determination of Changes in Thoracic Outlet Area Under Simulated
Provocative Maneuvers. Proceedings of the 44th Annual Meeting of the ORS,
March 16-19, 1998, New Orleans, Lousiana.
E.G. McFarland, M. Fung, S. Kato, J.D. Des Jardins, E.Y.S. Chao, Glenohumeral
Motion Can Be Distinguished From Scapulothoracic Motion in Rotation.
Proceedings of the 44th Annual Meeting of the ORS, March 16-19, 1998, New
Orleans, Lousiana.
J.D. Des Jardins, The Mechanical Evaluation of a Range of Total Knee
Replacements Using the KC Stanmore Knee Simulator. Presentation given at the
UK Department of Health Industrial Consortium, April 7, 1998, The Kings Fund,
London.
J.D. Des Jardins, H. Haider, J. Perry, P.S. Walker, The Kinematic Testing of
Multiple TKR Desings Using A Force Controlled Walking Cycle. Proceedings of
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
the 11th Annual Symposium of the International Society for Technology in
Arthoplasty (ISTA), October 1-3, 1998, Marseille, France.
H. Haider, P.S. Walker, G.W. Blunn, J. Perry, J.D. Des Jardins, A Four Channel
Force Control Knee Simulator: From Conception to Production. Proceedings of
the 11th Annual Symposium of the International Society for Technology in
Arthoplasty (ISTA), October 1-3, 1998, Marseille, France.
J.D. Des Jardins, P.S. Walker, H. Haider, J. Perry, The Evaluation of TKR Designs
Using a Simulated Walking Cycle. Proceedings of the 4th Congress of the
European Federation of National Assocoations of Orthopaedics and Traumatology
(EFORT), June 3-8, 1999, Brussels, Belgium.
J.D. Des Jardins, P.S. Walker, H. Haider, J. Perry, The Influence of Soft Tissue
Constraint on the Mechanical Performance of Different TKR Designs.
Proceedings of the 9th Annual Meeting of the European Orthopaedic Research
Society (EORS), June 3-4, 1999, Brussels, Belgium.
J.D. Des Jardins, P.S. Walker, H. Haider, J. Perry, A Comparison Between the
Uni-Axial and Dynamic Walking Cycle Laxities of Multiple TKR Designs.
Proceedings of the 9th Annual Meeting of the European Orthopaedic Research
Society (EORS), June 3-4, 1999, Brussels, Belgium.
J.D. Des Jardins, P.S. Walker, H. Haider, J. Perry, An Analysis of Tibial
Component and Soft Tissue Shear Loads During a Force Controlled Walking
Cycle For Multiple TKR Desings. Proceedings of the 9th Annual Meeting of the
European Orthopaedic Research Society (EORS), June 3-4, 1999, Brussels,
Belgium.
L.C. Benson, J.D. DesJardins, D.W. Schroeder, M. LaBerge, Effect of Wear on
Kinematics of a TKR: A Simulator Comparison of Molded and Machined
UHMWPE Tibial Plateaus. Proceedings of the 1999 International Mechanical
Engineering Congress & Exposition of ASME, November 14-19, 1999, Nashville,
Tennessee.
J.D. DesJardins, H. Haider, J. Perry, P.S. Walker., The in-vitro measurement of
walking cycle kinematics for multiple TKR designs. Proceedings of the 46th
Annual Meeting of the ORS. Page 430. March 12-15, 2000, Orlando, Florida.
J.D. DesJardins, H. Haider, J. Perry, P.S. Walker., The In-Vitro Measurement TKR
and Soft Tissue Shear Reaction Forces During Gait. Proceedings of the 46th
Annual Meeting of the ORS. Page 437. March 12-15, 2000, Orlando, Florida.
J.D. DesJardins, L.C. Benson, M. LaBerge, The Stability of Bovine Serum
Lubricant During Prolonged Knee Joint Simulator Wear Testing. Proceedings of
the Southern Biomedical Engineering Conference. April 14-16, 2000, Virginia
Polytechnic Institute and State University, Blacksburg, Virginia.
J.D. DesJardins, P.S. Walker, H. Haider, J. Perry, The Use of a Force-Controlled
Dynamic Knee Simulator to Quantify the Mechanical Performance of Total Knee
Replacement Designs. Bull. Jpn. Inst. Met., Vol. 33, 2000, pp. 1231–1242.
J.D. DesJardins, L.C. Benson, M. LaBerge, The Stability of Bovine Serum
Lubricant During Prolonged Knee Joint Simulator Wear Testing. Proceedings of
the 6th World Biomaterials Congress. Abstract 868. May 15-20, 2000, Kamuela,
Hawaii.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
L.C. Benson, J.D. DesJardins, M. LaBerge, TKR Sliding and Rolling
Displacements: Comparison of Molded and Machined UHMWPE. Proceedings of
the World Biomaterials Congress. Abstract 1481. May 15-20, 2000, Kamuela,
Hawaii.
M. Harman, J.D. DesJardins, S. Banks, L. Benson, M. LaBerge, W. Hodge,
Damage Patterns of Polyethylene Inserts After Retrieval and After Wear
Simulation. Proceedings of the 47th Annual Meeting of the ORS. Page 1003.
February 25-28, 2001, San Fransisco, California.
J.D. DesJardins, S.A. Banks, T. Pace, L.C. Benson, M. LaBerge, A Direct
Comparison of Patient and Simulator Total Knee Replacement Kinematics.
Proceedings of the 47th Annual Meeting of the ORS. Page 1096. February 25-28,
2001, San Francisco, California.
M. Harman, J.D. DesJardins, S. Banks, L. Benson, M. LaBerge, W. Hodge,
Damage Patterns of Polyethylene Inserts After Retrieval and After Wear
Simulation. Proceedings of the 4th Combined Meeting of the Orthopaedic
Research Societies of the U.S.A., Canada, Europe and Japan. Paper #159. June 36, 2001, Rhodes, Greece.
J.D. DesJardins, S.A. Banks, L.C. Benson, M. LaBerge, A Direct Comparison of
Patient and Simulator Total Knee Replacement Kinematics. Proceedings of the
2001 International Mechanical Engineering Congress & Exposition of ASME.
Abstract #34366. November 11-16, 2001, New York, New York.
M. Harman, J.D. DesJardins, S. Banks, L. Benson, M. LaBerge, W. Hodge,
Damage Patterns of Polyethylene Inserts After Retrieval and After Wear
Simulation. Proceedings of the 14th Annual Symposium of the International
Society for Technology in Arthoplasty (ISTA). Paper #52. September, 2001.
J.D. DesJardins, S.A. Banks, M. LaBerge, Validation of TKR Wear Testing
Contact Sliding Velocities Using In Vivo TKR Fluoroscopy. Proceedings of the
48th Annual Meeting of the ORS. Poster #0959. February 10-13, 2002, Dallas,
Texas.
J.D. DesJardins, M. Carroll, M. LaBerge, The Measurement of TKR Kinematic
Pivot Locations During Simulated Functional Activity. Proceedings of the 48th
Annual Meeting of the ORS. Poster #0960. February 10-13, 2002, Dallas, Texas.
L.C. Benson, J.D. DesJardins, T. Pace, M. LaBerge, Stair Descent Load Pattern
for Total Joint Simulation. Proceedings of the 48th Annual Meeting of the ORS.
Poster #1006. February 10-13, 2002, Dallas, Texas.
J.D. DesJardins, M. LaBerge, Force-Controlled TKR Wear Simulation Produces
Complex Cross-Shear Kinematics. Proceedings of the 28th Annual Meeting of the
SFB. Poster #711. April 24-27, 2002, Tampa, Florida.
J.D. DesJardins, M. Carroll, M. LaBerge, Tracking TKR Design Dynamic Pivot
Loactions During Force-Controlled TKR Wear Simulation. Proceedings of the
28th Annual Meeting of the SFB. Poster #718. April 24-27, 2002, Tampa, Florida.
M. K. Harman, L.C. Benson, J.D. DesJardins, M. LaBerge, Kinematics and Wear
Damage During Stair Descent Loading in Knee Simulator. Proceedings of the 28th
Annual Meeting of the SFB. Poster #714. April 24-27, 2002, Tampa, Florida.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
62.
L.C. Benson, J.D. DesJardins, M. LaBerge, Stair Descent Loading Pattern
Applied in Force-Controlled Knee Simulator. Proceedings of the 28th Annual
Meeting of the SFB. Poster #592. April 24-27, 2002, Tampa, Florida.
J.D. DesJardins, M. LaBerge,UHMWPE In Vitro Wear Performance Against
Roughened Oxidized Zirconium and CoCr Femoral Components. Proceedings of
the 29th Annual Meeting of the SFB. Poster #364. April 30-May 3, 2003, Reno,
Nevada.
C.B. Rieker, R. Schon, G. Liebentritt, P. Gnepf, J.D. DesJardins, M. LaBerge,The
Influence of Mobile Bearing Knee Prostheses Kinematics on Their Wear
Behaviour. Proceedings of the 7th World Biomaterials Congress. May 17 – 21,
2004, Sydney, Australia.
S.R. Shah, J. DesJardins, A. Clark, R.W. Blob, Antler stiffness in reindeer: testing
variation in bone material properties between males and females. Proceedings of
the 7th International Society of Vertebrate Morphologists. Poster #364. July 27August 1, 2004, Boca Raton, Florida.
M.R. Gevaert, M. LaBerge, J.M. Gordon, J.D. DesJardins , The Quantification of
Physiologically Relevant Cross Shear Wear Phenomena on Orthopaedic Bearing
Materials Using a Novel Wear Testing Machine, Proceedings of the American
Society of Mechanical Engineers (ASME) / Society For Tribologists and
Lubrication Engineers (STLE) International Joint Tribology Conference, Abstract
#TRIB2004-64150, October 24-27, 2004, Long Beach, California.
L.M. Gustafson, L.C. Benson, M. LaBerge, J.D. DesJardins, Dynamic
Tibiofemoral Contact Mechanics in a Total Knee Replacement. Proceedings of the
2004 International Mechanical Engineering Congress & Exposition of ASME.
Abstract #Poster. Volume 48, November 13-19, 2004, Anaheim, California.
A. Aurora, J.D. DesJardins, P.F. Joesph, M. LaBerge, Effect of Simulated TKR
Lubricant Composition on the Fatigue Properties of UHMWPE, Proceedings of
the 51th Annual Meeting of the ORS. Paper and Poster #281. February 19-23,
2005, Washington, D.C.
A. Aurora, J.D. DesJardins, S.L. Tanner, T.B. Pace, D. Weinbrenner, M. LaBerge,
Knee Simulator Testing in a Clinically Relevant TKR Lubricant, Proceedings of
the 51th Annual Meeting of the ORS. Paper #167. February 19-23, 2005,
Washington, D.C.
A.C. Clark, J.D. DesJardins, T.B. Pace, M. LaBerge, Measurement of Dynamic
Contact Area and Lubrication Modes in a Highly Conforming and Standard
Conforming Tibial Insert Using Polymeric Doping Technology, Proceedings of
the 51th Annual Meeting of the ORS. Paper #568. February 19-23, 2005,
Washington, D.C.
J.D. DesJardins, M. LaBerge, Kinematic Parameters Affecting Biomaterials
Wear: “Cross-Pathway” Motion as a Variable in Pin-on-Disk Testing.
Proceedings of the 31th Annual Meeting of the SFB. Invited Symposium
Paper#97. April 27-April 30, 2005, Memphis, Tennessee.
A.C. Clark, J.D. DesJardins, T.B. Pace, M. LaBerge, New Sensor Technology To
Measure Dynamic Contact Stress Distributions In Artificial Knee Joints,
Proceedings of the 31th Annual Meeting of the SFB. Paper#200. April 27-April
30, 2005, Memphis, Tennessee.
63.
64.
65.
66.
67.
68.
69.
70.
71.
72.
73.
74.
J.D. DesJardins, L.C. Benson, L.M. Gustafson, M. LaBerge, Fiberscopic
Visualization of Total Knee Replacement Contact Kinematics During In Vitro
Simulation, Proceedings of the 3rd Quatroannual Meeting of the World Tribology
Congress. Poster #084. September 12-16, 2005, Washington, D.C.
J. Cammon, J.D. DesJardins, A.C. Clark, M. LaBerge, Quantification of
Medial/Lateral TKR Kinematics With UHMWPE Wear, Proceedings of the 52nd
Annual Meeting of the ORS. Poster #653. March 19-22, 2006, Chicago, Illinois.
J. Cammon, J.D. DesJardins, A.C. Clark, M. LaBerge, Quantification of TKR
Kinematics During UHMWPE Wear. Proceedings of the 1st Annual South East
Biomechanics Conference. Session E, Paper#4. March 30-April 1, 2006, Atlanta,
Georgia
J.D. DesJardins, J. Hemmer, M. Drews, M. LaBerge, UHMWPE Fluid Absorption
And Off-Gassing Following Supercritical CO2 Sterilization. Proceedings of the
32th Annual Meeting of the SFB. Paper#222. April 26-April 29, 2006, Pittsburgh,
Pennsylvania.
J. Cammon, J.D. DesJardins, A.C. Clark, M. LaBerge, Quantification of
Medial/Lateral TKR Kinematics During UHMWPE Wear. Proceedings of the 32th
Annual Meeting of the SFB. Poster#694. April 26-April 29, 2006, Pittsburgh,
Pennsylvania
J.D. DesJardins, M. LaBerge, In Vitro Tribology Model for Cartilage-Hydrogel
Bearing Investigations, Proceedings of the 2006 Annual Meeting of the
Biomedical Engineering Society. Poster#467. October 11-14, 2006, Chicago,
Illinois.
J.D. DesJardins, J. Hemmer, M. Matthews, M. Drews, M. LaBerge, Wear and
mechanical testing of supercritical carbon dioxide sterilized UHMWPE,
Proceedings of the 53rd Annual Meeting of the ORS. Poster #1785. February 1114, 2007, San Diego, California.
M. Ebbert, J. Chapman, J.D. DesJardins, M. LaBerge, H. Yao, Surface-Regional
Variation in Frictional Coefficient of Porcine TMJ Disc, International Association
For Dental Research/American Association For Dental Research/Canadian
Association For Dental Research (IADR/AADR/CADR) 85th General Session
and Exhibition, Paper#3007, March 21-24, 2007, New Orleans, Lousiana
J.D. DesJardins, M. Drews, M. LaBerge, Wear Particle Analysis of Supercritical
Carbon Dioxide Sterilized UHMWPE from Total Knee Replacement Simulation.
Proceedings of the 33th Annual Meeting of the SFB. Poster#446. April 18-21,
2007, Chicago, Illinois.
J.D. DesJardins, Opportunities for Early Student Design Topic Investment - SETUP Strategy. Meeting of the Biomedical Engineering - Innovation, Design and
Entrepreneurship Alliance (BME-IDEA), Paper#3, Session: Needs Assessment
and Framing Projects, September 26, 2007, Hollywood, California
J.J. Rodrigo, J.D. DesJardins, B. McGehee, M. Hoyle, Rotational High Tibial
Opening Wedge Osteotomy for Medial Knee Arthritis. Proceedings of the Annual
Meeting of the International Cartilage Repair Society (ICRS) World Congress.
Paper 16.3. September 29-October 2, 2007, Warsaw, Poland.
J.D. DesJardins, J.J. Rodrigo, L. Mullin, P. Boatwight, M. Suri, S.B. Singleton,
D.J. Wyland, Mechanical Analysis of Cartilage Regeneration After Femoral
Trochlear Groove Microfracture Treatment in a Mature Lapine Model.
Proceedings of the 54th Annual Meeting of the ORS. Poster #648. March 2-5,
2008, San Fransisco, California.
75. J.D. DesJardins, A Review and Assessment of the Clemson University SC-INBRE
Summer Workshop Series. Proceedings of the South Carolina INBRE (IDeA
Networks of Biomedical Esearch Excellence) 2008 Research Symposium. Poster
#P11. January 17-18 2008, Charleston, South Carolina.
76. D. Jamison IV, J.D. DesJardins, J.J. Rodrigo, Rotational High Tibial Opening
Wedge Osteotomy for Medial Knee Arthritis. Proceedings of the New England
Science Symposium, Harvard Medical School, April 6, 2008, Boston,
Massachusetts.
77. J.D. DesJardins, J. Segars, M. Hoyle, J.J. Rodrigo, Effect of Graft Rotation in
High Tibial Opening Wedge Osteotomy Alignment for Medial Knee Arthritis.
Proceedings of the 13th Annual International Conference on Biomedical
Engineering. Poster #PS3-033. December 3-6, 2008, Singapore, Republic of
Singapore.
78. J.D. DesJardins, J. Segars, M. Hoyle, J.J. Rodrigo, Effect of Graft Rotation in
High Tibial Opening Wedge Osteotomy Alignment for Medial Knee Arthritis.
Proceedings of the 55th Annual Meeting of the ORS. Poster #2187. February 2225, 2009, Las Vegas, Nevada.
79. J.D. DesJardins, B. Hutto, D. Reed, B. Tedder, D. Reghavan, L. Sierad, A Device
to Test and Assist in the Manufacturing of an AFO, Proceedings of the 35th
Annual American Academy of Orthotists & Prosthetists (AAOP), Poster #002,
Page 19. March 4-7, 2009, Atlanta, GA
80. M. Suri, J.J. Rodrigo, J.D. DesJardins, D. Wyland, S.B. Singleton, P. Boatwright,
M. Hoyle, Improved Percentage Fill after Microfracture with Complete vs.
Central Hole Placement in a Mature Lapine Model. Proceedings of the Annual
Meeting of the American Orthopaedic Society for Sports Medicine (AOSSM)
2009, July 9 - 12, 2009, Keystone, Colorado.
AOSSM 2009 Poster Award Recipient, Second Place
81. B.L. Roach, M. Spinelli, J.B. Matheny, R.W. Blob, J.D. DesJardins,
Quantification of contact kinematics in UKR simulation using high speed video
analysis, Proceedings of the Southeast Biomedical Engineering Career
Conference (SEBECC), Poster #34, October 30, 2009, Washington, DC.
82. T.J. Warrick, J.D. DesJardins, E. Alvarez, Changes in 3D Rotational Stiffness of
an Ankle Foot Orthosis due to Varied Cut-Line Location, Proceedings of the
Southeast Biomedical Engineering Career Conference (SEBECC), Poster #7,
October 30, 2009, Washington, DC.
83. M.E. Wabler, C.J. Wright-Walker, E. Alvarez, J.D. DesJardins, Exploration,
Development, and Implementation of the Clemson University Retrieval of
Explants Program in Orthopaedics (CU-REPO), Proceedings of the Southeast
Biomedical Engineering Career Conference (SEBECC), Poster #10, October 30,
2009, Washington, DC.
84. T. Warrick, D. Benson, R. Brooks, E. Skewes, E. Alvarez, J.D. DesJardins. The
Effect of Cut-Line Location on the 3D Rotational Stiffness of an Ankle Foot
Orthosis. Proceedings of the 56th Annual Meeting of the ORS. Podium #223.
March 5-10, 2010, New Orleans, Louisiana.
85. R. Rusly, J.D. DesJardins, Single Flexion-Axis Selection Influences Femoral
Component Alignment and Kinematics during Knee Simulation. Proceedings of
the 56th Annual Meeting of the ORS. Poster #2319. March 5-10, 2010, New
Orleans, Louisiana.
86. C. Vaidya, J. Vinciguerra, J. DesJardins. Reduction of Total Knee Replacement
Wear with Vitamin E doped highly cross linked UHMWPE. Proceedings of the
56th Annual Meeting of the ORS. Poster #2295. March 5-10, 2010, New Orleans,
Louisiana.
87. B. Roach, J. Matheny, M. Spinelli, R. Blob, J.D. DesJardins. High Speed Video
Analysis To Quantify Contact Kinematics in UKR Simulation. Proceedings of the
56th Annual Meeting of the ORS. Poster #2434. March 5-10, 2010, New Orleans,
Louisiana.
88. J.J. Rodrigo, G. Bennett, D. Sahajpal, M. Suri, M. McDonough, J. DesJardins,
Nearby Cartilage Stimulation Occurs with Microfracture. Proceedings of the 56th
Annual Meeting of the ORS. Poster BOA #3. March 6-9, 2010, New Orleans,
Louisiana.
89. M. Spinelli, M. Harman, S. Affatato, J. DesJardins. Functional Performance of a
Fixed-bearing Unicompartmental Knee Prosthesis Utilizing Force-controlled
Knee Wear Simulation. Proceedings of the 56th Annual Meeting of the ORS.
Poster #2318. March 6-9, 2010, New Orleans, Louisiana.
90. M. Harman, M. Spinelli, J. DesJardins, S. Affatato, M. Viceconti, Pre-Clinical
Assessment of Unicondylar Knee Replacements: Do ISO Standards for Wear
Simulation Predict Damage Patterns on Explanted UKR? Proceedings of the 56th
Annual Meeting of the ORS. Short Talk Presentation #267. March 6-9, 2010, New
Orleans, Louisiana.
91. M. Harman, M. Spinelli, J. DesJardins, S. Affatato, M. Viceconti, Pre-Clinical
Assessment of Unicondylar Knee Replacements: Do ISO Standards for Wear
Simulation Predict Damage Patterns on Explanted UKR? Proceedings of the 56th
Annual Meeting of the ORS. Short Talk Poster #267. March 6-9, 2010, New
Orleans, Louisiana.
92. J.J. Rodrigo, G. Bennett, J. DesJardins, D. Sahajpal, M. Suri, M. McDonough,
Nearby Cartilage Stimulation Occurs with Microfracture. Proceedings of the 62nd
Annual Meeting of the Association of Bone and Joint Surgeons (ABJS).
Presentation #40. April 7-9, 2010, Washington D.C., USA.
93. M. Wabler, E. Alvarez, J.D. DesJardins, Exploration, Development, and
Implementation of the Retrieval of Explants Program in Orthopaedics (REPO).
Proceedings of the Annual Meeting of the American Society for Engineering
Education Conference and Exposition, Paper #AC 2010-1700, June 20-23, 2010,
Louisville, KY.
94. E. Alvarez, S. Saville, O. Mefford, J.D. DesJardins, The use of Conference
preparatory principles and practices (writing and presentation skills) to teach
interdisciplinary laboratory courses. Proceedings of the Annual Meeting of the
American Society for Engineering Education Conference and Exposition,
Paper#AC 2010-1621, June 20-23, 2010, Louisville, KY.
95.
96.
97.
98.
99.
100.
101.
102.
103.
104.
R. Hutchison, J.D. DesJardins, L. Benson. The use of situated cognition and
constructivist Theories to Teach Movement Science in Biomechanics Paper#AC
2010-1822, Proceedings of the Annual Meeting of the American Society for
Engineering Education Conference and Exposition, Paper #AC 2010-1621, June
20-23, 2010, Louisville, KY.
S. Joshi, J. Ju; L. Berglind; R. Rusly, J.D. DesJardins, J. Summers, Experimental
Damage Characterization of Hexagonal Honeycombs Subjected to In-Plane Shear
Loading, Proceedings of the Annual Meeting of the ASME 2010 International
Design Engineering Technical Conferences (IDETC) and Computers and
Information in Engineering Conference (CIE), Paper #28549, August 15-18, 2010,
Montréal, Canada.
DesJardins J, O’Neill L, Meenan BJ, Jeray K, Rodrigo J, Dynamic Compression
Plates and External Fixator Pins with Infection Preventing Surfaces, Annual
Meeting of the Advanced Technology Applications for Combat Casualty Care,
Poster#??, August 16-19, 2010, St. Pete Beach, Florida.
M. Suri, J.J. Rodrigo, S. Singleton, D. Wyland, J.D. DesJardins, M. Hoyle, P.
Boatwright, M. McDonough, Complete Hole Placement with Microfracture
Improves Cartilage Repair as Compared to Limited Central Hole Placement,
Proceedings of the Annual Meeting of the International Cartilage Repair Society
(ICRS) World Congress. Paper ???. September 26 - 29, 2010, Sitges/Barcelona,
Spain.
J. Matheny, B. Roach, M. Spinelli, J. DesJardins, Shear-Plane Motion in
Unicondylar Knee Replacements with Change to Simulated Soft-Tissue
Constraint, Proceedings of the Annual Meeting of the Biomedical Engineering
Society, Poster 7B-12-139, October 6-9, 2010, Austin, TX.
H. Cash, E. Alvarez, M. Elpers, M. Wabler, F. Voss, J. DesJardins, Comparative
Analysis of Retrieved Genesis II UHMWPE Articulating Against OxZr vs. CoCr
Femoral Components, Proceedings of the Annual Meeting of the Biomedical
Engineering Society, Poster #7B-12-140, October 6-9, 2010, Austin, TX.
E. Sloan, E. Alvarez, M. Elpers, H. Cash, M. Wabler, J. DesJardins, Analysis and
Damage Characterization of PS Total Knee Joint Replacement Posts, Proceedings
of the Annual Meeting of the Biomedical Engineering Society, Poster #7B-12141, October 6-9, 2010, Austin, TX.
E. Alvarez, M. Elpers, H. Cash, M. Wabler, J. DesJardins, Assessment of New
Damage Scoring Methodology for Total Knee Replacement Retrieval Analysis,
Proceedings of the Annual Meeting of the Biomedical Engineering Society, Poster
#7B-13-158, October 6-9, 2010, Austin, TX.
B. Roach, J. McKee, R. Goodenough, J. Brooks, J. DesJardins, Quantification of
Maximum Neck Range of Motion in Assessment of Patient Peripheral Vision,
Proceedings of the Annual Meeting of the Biomedical Engineering Society, Poster
#8A-12-173, October 6-9, 2010, Austin, TX.
M. Elpers, E. Alvarez, H. Cash, M. Wabler, B. Burnikel, J. Rodrigo, J.
DesJardins, Comparative Analysis of Damage to Retrieved Femoral and Tibial
NexGen PS Components, Proceedings of the Annual Meeting of the Biomedical
Engineering Society, Poster #7B-13-155, October 6-9, 2010, Austin, TX.
105. M. Wabler, E. Alvarez, M. Elpers, H. Cash, H. Demos, H. Schutte Jr., J.
DesJardins, Damage Scoring and Surface Roughness Analysis to Assess Oxinium
and Standard CoCr Femoral Component Scratching in Total Knee Replacements,
Proceedings of the Annual Meeting of the Biomedical Engineering Society, Poster
# 7B-13-150, October 6-9, 2010, Austin, TX.
106. T. Warrick, S. Bielby, E. Skewes, R. Brooks, D. Benson, C. Dunning, J.
DesJardins, Quantitative Analysis of an AFO Cut-Line Measurement Technique,
Proceedings of the Annual Meeting of the Biomedical Engineering Society, Poster
# 7B-12-136, October 6-9, 2010, Austin, TX.
107. C.S. Cummings, E.M. Lucas, T.M. Kieu, J.A. Marro, and J.D. DesJardins, The
Effects of Proton Radiation on UHMWPE Material Properties for Total Joint
Replacements, Proceedings of the Annual Meeting of the Biomedical Engineering
Society, Poster #PS-9B-157, October 6-9, 2010, Austin, TX.
108. C.S. Cummings, E.M. Lucas, J.A. Marro, T.M. Kieu, and J.D. DesJardins, The
Effects of Proton Radiation on UHMWPE Material Properties for Total Joint
Replacements, Proceedings of the Southeast Biomedical Engineering Career
Conference (SEBECC), Poster #2, October 29, 2010, Clemson, SC
109. E. Alvarez, M.E. Elpers, H.M. Cash, M.E. Wabler, J.D. DesJardins, Assessment of
New Damage Scoring Methodology for Total Knee Replacement Retrieval
Analysis, Proceedings of the Southeast Biomedical Engineering Career
Conference (SEBECC), Poster #7, October 29, 2010, Clemson, SC
110. M.E. Elpers, E. Alvarez, H.M. Cash, M.E. Wabler, J.D. DesJardins , Comparative
Analysis Retrieved Femoral Components Surface Scratching in the NexGen PS
Design, Proceedings of the Southeast Biomedical Engineering Career Conference
(SEBECC), Poster #29, October 29, 2010, Clemson, SC
111. K.A. Rusaw, M. Finn, F. Voss, J.D. DesJardins, Dislocation Biomechanics of
Constrained Acetabular Liners for Total Hip Arthroplasty, Proceedings of the
Southeast Biomedical Engineering Career Conference (SEBECC), Poster #30,
October 29, 2010, Clemson, SC
112. T.J. Warrick, R.J. Rusly, L. Mears, J.D. DesJardins, Assessment of Femoral/Tibial
Bearing Laxity in Total Knee Replacements Using a Robotic Manipulator,
Proceedings of the Southeast Biomedical Engineering Career Conference
(SEBECC), Poster #33, October 29, 2010, Clemson, SC
113. M. Cole, K. Vernon, J.D. DesJardins, Assessment of Horse-Rider Kinematic
Variables During Hippotherapy, Proceedings of the Southeast Biomedical
Engineering Career Conference (SEBECC), Poster #34, October 29, 2010,
Clemson, SC
114. B.L. Roach, P.J. McKee, J. Arnosky, J. Brooks, J.D. DesJardins, Assessment of
LSVT BIG As An Effective Treatment for Motor Deficits In Parkinson's Disease
Patients, Proceedings of the Southeast Biomedical Engineering Career
Conference (SEBECC), Poster #35, October 29, 2010, Clemson, SC
115. C.A. Lindburg, S.A. Bielby, J.S. Willey, J.D. DesJardins, Effect of Radiation on
Articular Cartilage Biomechanics, Proceedings of the Southeast Biomedical
Engineering Career Conference (SEBECC), Poster #39, October 29, 2010,
Clemson, SC
116. C.E. Golightly, E.E. Sloan, J.D. DesJardins, The Effect of ASTM F-2003
Accelerated Aging of UHMWPE on Specimen Weight Change, Proceedings of the
Southeast Biomedical Engineering Career Conference (SEBECC), Poster #42,
October 29, 2010, Clemson, SC
117. R.J. Rusly, J.D. DesJardins, Knee Testing Rig Design for Investigating the
Kinematics and Kinetics of Knee Specimens, Proceedings of the Southeast
Biomedical Engineering Career Conference (SEBECC), Poster #44, October 29,
2010, Clemson, SC
118. J.B. Matheny, B.L. Roach, M. Spinelli, J.D. DesJardins, Shear-Plane Motion in
Unicondylar Knee Replacements with Change to Simulated Soft-Tissue
Constraint, Proceedings of the Southeast Biomedical Engineering Career
Conference (SEBECC), Poster #49, October 29, 2010, Clemson, SC
119. L.M. Gorrell, D.A. Haywood, M.D. Hope, P.T. Ovington, K.M. Rye, J.N.
Webster, J.D. DesJardins, Assessment of Customer Needs and Engineering
Requirements for the Design of a Novel Combat Tourniquet, Proceedings of the
Southeast Biomedical Engineering Career Conference (SEBECC), Poster #??,
October 29, 2010, Clemson, SC
120. E. Alvarez, J. Vinciguerra, M.E. Wabler, J.D. DesJardins, The Effect of a Novel
Electropolishing Technique on the Frictional Performance of a CoCr Surface for
Total Joint Replacements, Poster P43, Proceedings of the 2010 Annual Meeting
of the Annual Biomedical Research Conference for Minority Students, November
10 - 13, 2010, Charlotte, North Carolina
121. C. Eljach, M. Kennedy, J. DesJardins, Surface Patterning Effects on Wear and
Friction in Metal-Polymer and Metal-Metal Contact, Proceedings of the Annual
Meeting & Exhibition of the Minerals, Metals & Materials Society (TMS),
Biological Materials Science Symposium, February 27-March 3, 2011, San
Diego, California
122. C.A. Lindburg, S.A. Bielby, J.S. Willey, J.D. DesJardins, Effect of X-Ray
Irradiation on Porcine and Murine Cartilage Modulus, Proceedings of the 37th
Annual Meeting & Exposition of the Society for Biomaterials, Poster #794, April
13-16, 2011, Orlando, Florida
123. C. Wright-Walker, J.D. DesJardins, M. LaBerge, Tribological Evaluation of a
Drug Enriched Ultra-High Molecular Weight Polyethylene for Enhanced Total
Joint Replacement Bearing Surface Functionality, Proceedings of the 37th Annual
Meeting & Exposition of the Society for Biomaterials, Podium #39, April 13-16,
2011, Orlando, Florida.
124. C.E. Golightly, E.E. Sloan, J.D. DesJardins, The Effect of ASTM F-2003
Accelerated Aging of UHMWPE on Specimen Weight Change, Proceedings of the
37th Annual Meeting & Exposition of the Society for Biomaterials, Poster #745,
April 13-16, 2011, Orlando, Florida
125. J.T. Kim, M. Zilkoski, R. Rusly, K. Fruscello, T. Bacro, J. Desjardins, W.
Barfield, W. Mckibbin, Separation of Bovine Achilles Tendon Ends Repaired
With Krackow and Modified Mason-Allen Technique Under Cyclic Loading: A
Biomechanical Study, Proceedings of the 27th Annual Summer Meeting of the
American Orthopaedic Foot and Ankle Society, July 13-16, 2011, Keystone,
Colorodo
126. G.P. Colbath, Q.K. Kang, X. Li, B.R. Whatley, V. Beachley, P.C. Chou, J.D.
DesJardins, M. Kindy, X. Wen, Augmentation of Rat Rotator Cuff Repairs Using
A Bioengineering Approach And Myostatin Inhibitors, Proceedings of the 28th
Annual Meeting of the Southern Orthopaedic Association July 20-23, 2011, Big
Island, Hawaii
127. J.T. Kim, M. Zilkoski, R. Rusly, K. Fruscello, T. Bacro, J. Desjardins, W.
Barfield, W. Mckibbin, Separation of Bovine Achilles Tendon Ends Repaired
With Krackow and Modified Mason-Allen Technique Under Cyclic Loading: A
Biomechanical Study, Proceedings of the 2011 South Carolina Orthopaedic
Association Annual Scientific Meeting, October 4-7, 2011, Kiawah Island, South
Carolina
128. J.C. Ivester, M. Finn, F.R. Voss, K.A. Rusaw, R.J. Rusly, and J.D. DesJardins, In
Vitro Biomechanical Analysis of Repeated Dislocation/Reduction in Constrained
Hip Arthroplasty, Proceedings of the Annual Meeting of the Biomedical
Engineering Society (BMES), Poster #PS-Sat-B-107, October 12-15, 2011,
Hartford, CT.
129. W.D. Simpson III, A.D. Bries, S.J. Tolan, M.K. Harman, R.J. Hawkins, and J.D.
DesJardins, Implant Alignment Reproducibility in a Reverse Shoulder
Arthroplasty Micromotion Study, Proceedings of the Annual Meeting of the
Biomedical Engineering Society (BMES), Poster PS-Sat-B-111, October 12-15,
2011, Hartford, CT.
130. R.M. Halsey, K.M. Harfmann, E. Nuwass, D.B. Ellegala, J.S. Nicholas, D. Dean,
and J.D. DesJardins, Design of an Anatomical Cervical Orthosis Testing
Apparatus and Preliminary Results, Proceedings of the Biomedical Engineering
Society Conference (BMES), Poster #PS-Sat-B112, October 12-15, 2011,
Hartford, CT
131. J.H. Ball, K. Norasak, E. Lucas, and J.D. DesJardins, The Effect of Proton-Source
Radiation on the Wear Properties of UHMWPE, Proceedings of the Biomedical
Engineering Society Conference (BMES), Poster #PS-Sat-B113, October 12-15,
2011, Hartford, CT
132. C.J. Eljach, N. Mitchell, B. Lodge, J. Sharp, M. Kennedy, and J.D. DesJardins,
Friction Testing of Stainless Steel Micropatterned Surfaces for Orthopaedic
Bearing Surfaces, Proceedings of the Annual Meeting of the Biomedical
Engineering Society (BMES), Poster #PS-Sat-B-114, October 12-15, 2011,
Hartford, CT.
133. M.C. Ware, J.J. Rodrigo, S.A. Bielby, A.B. Anderson, D. Wyland, J.D.
DesJardins, Effect of Platelet Rich Plasma Augmented Microfracture on Cartilage
Regeneration in a Lapine Model, Proceedings of the Annual Meeting of the
Biomedical Engineering Society (BMES), Poster #Sat-B-115, October 12-15,
2011, Hartford, CT.
134. J.D. DesJardins, International Research Experiences for Undergraduates:
Global Opportunities Through Clemson University, Presented at the 2011
International Perspectives on Undergraduate Research and Inquiry: A Scholarly
Discussion, a Pre-Conference Workshop of The International Society for the
Scholarship of Teaching & Learning, October 20, 2011, Milwaukee, WI.
135. E. Alvarez, M.E. Elpers, H.M. Cash, M.E. Wabler, J.D. DesJardins, Assesment of
Quantitative Methodology for Evaluation of Retrieved Metallic Femoral
Components from Total Knee Replacements, Podium #IJTC2011-61169,
ASME/STLE 2011 International Joint Tribology Conference, October 24-26,
2011, Los Angeles, CA.
136. A. Dicks, M. Halsey, K. Harfmann, B. McCaskill, T. Youngman, D. Dean, and
J.D. DesJardins, Designing Medical Technologies for the Developing World,
Proceedings of the Southeast Biomedical Engineering Career Conference
(SEBECC), Poster #21, October 29th, 2011, Herndon, VA.
137. J.V. Breitmeier, D.M. Kwartowitz, J.N. Gowdy, J.D. DesJardins, Computer Aided
Image Analysis of Retrieved Metallic Femoral Knee Implant Surface Damage,
Proceedings of the SCMedTech, Poster, November 10, 2011, Charleston, SC.
138. T.J. Warrick, R.J. Rusly, L. Mears, J.D. DesJardins, Identification of the Optimal
Flexion Axis in Total Knee Replacements Using a Robotic Manipulator, Presented
at the 2011 Annual Meeting of the Sigma Xi Conference, Poster #33, November
11-12, 2011, Raleigh, North Carolina, USA.
139. M. Cole, J. Arnosky, B. Walker, S. Neuhoff, R. Blob, K. Vernon, J.D. DesJardins,
Assessment of Horse-Rider Kinematic Variables During Hippotherapy, Presented
at the 2011 Annual Meeting of the Sigma Xi Conference, Poster #33, November
11-12, 2011, Raleigh, North Carolina, USA.
140. J.T. Kim, R.J. Rusly, K. Fruscello, T. Bacro, W.R. Barfield, W.K. McKibbin, J.D.
DesJardins, Comparison of Achilles Tendon Suture Repair Techniques: Krackow
vs. Modified Mason-Allen Under Cyclic Loading in an In-Vitro Bovine Model,
Proceedings of the Orthopaedic Research Society Annual Meeting, Poster#1896,
February 4-7, 2012, San Francisco, California.
141. E. Alvarez, M. Harman, J.D. DesJardins, Development and Assessment of Knee
Femoral Component Surface Damage Classification and Training Method, Poster
#1949, Proceedings of the Orthopaedic Research Society Annual Meeting,
February 4-7, 2012, San Francisco, California.
142. E. Alvarez, J.D. DesJardins, S. Schmitt, M. Harman, Relationship between
Surface Roughness and Articular Wear for Cobalt-Chrome on Polyethylene
Bearing Couples: Evaluation of Retrieved Unicondylar Knee Replacements,
Poster# 1944, Proceedings of the Orthopaedic Research Society Annual Meeting,
February 4-7, 2012, San Francisco, California.
143. G. Colbath, B. Whatley, P. Chou, X. Li, V. Beachley, K. Kang, J.D. DesJardins,
X. Wen, Augmentation of Rat Rotator Cuff Repairs Using A Bioengineering
Approach And Myostatin Inhibitors, Proceedings of the Annual Meeting of the
AAOS, Presentation #814, San Francisco, CA, February 8-12, 2012
144. J.D. DesJardins, Industry Gate Reviews as a Method to Facilitate Senior
Capstone Design, Proceedings of the 16th Annual National Collegiate Inventors
and Innovators Alliance Conference, Presentation Panel Fri-1A3, San Francisco,
CA, March 22-24, 2012
145. A.B. Anderson, J.J. Rodrigo, J. DesJardins, M.C. Ware, D. Wyland, M. Suri,
G.W. Bennett, P.H. Wessinger, P.C. Siffri, R.J. Hawkins, 4-Hole Microfracture
with platelet rich plasma soaked synovial sponges, Proceedings of the 10th ICRS
World Congress, Podium#, May 12-15, 2012, Montreal, Canada
Conference Proceedings (Regional/Local, Non-Peer Reviewed Symposia)
1.
2.
3.
4.
5.
6.
7.
8.
9.
M.S. Lepine, L.A. Hartsock, W.R. Barfield, J.D. DesJardins, Biomechanical
Assessment of Fixation Methods for Repair of Pauwel’s Type III Femoral Neck
Fractures at Measured Fracture Moments. Proceedings of the Annual Siegling
Society Research Day, April 27, 2007, Charleston, SC.
M.S. Briones, P. White, J.D. DesJardins, W.R. Barfield, H.A. Demos,
Biomechanics of Locking Plates in Periprosthetic Fractures. Proceedings of the
Annual Siegling Society Research Day, April 25, 2008, Charleston, SC.
S. Bielby, J.D. DesJardins, L. Roudsari, L. Reese, M. Manning, S. Skoog, T.
Warrick, R. Brooks, E. Skewes, D. Benson, Design of Range of Motion
Measurement Interface for an Ankle-Foot-Orthosis Testing Apparatus, Presented
at the 7th SC-LIFE Colloquium of Undergraduate Research, Morris College, April
4, 2009, Sumter, South Carolina
M. Manning, J.D. DesJardins, S. Bielby, L. Roudsari, L. Reese, S. Skoog, T.
Warrick, R. Brooks, E. Skewes, D. Benson, LabView Interface for an AFO
Testing Apparatus, Presented at the 7th SC-LIFE Colloquium of Undergraduate
Research, Morris College, April 4, 2009, Sumter, South Carolina
L. Reese, J.D. DesJardins, S. Bielby, L. Roudsari, M. Manning, S. Skoog, T.
Warrick, R. Brooks, E. Skewes, D. Benson, Design of a Shin Fixation Interface
for an Ankle-Foot-Orthosis Testing Apparatus, Presented at the 7th SC-LIFE
Colloquium of Undergraduate Research, Morris College, April 4, 2009, Sumter,
South Carolina
L. Roudsari, J.D. DesJardins, L. Reese, M. Manning, S. Skoog, T. Warrick, S.
Bielby, R. Brooks, E. Skewes, D. Benson, Design of a Load Measurement
Interface for an Ankle-Foot-Orthosis Testing Apparatus, Presented at the 7th SCLIFE Colloquium of Undergraduate Research, Morris College, April 4, 2009,
Sumter, South Carolina
T. Warrick, J.D. DesJardins, L. Roudsari, L. Reese, M. Manning, S. Bielby, S.
Skoog, R. Brooks, E. Skewes, D. Benson, Design of an Ankle Motion System for
an Ankle-Foot-Orthosis Testing Apparatus, Presented at the 7th SC-LIFE
Colloquium of Undergraduate Research, Morris College, April 4, 2009, Sumter,
South Carolina
S. Skoog, J.D. DesJardins, L. Roudsari, L. Reese, M. Manning, S. Bielby, T.
Warrick, R. Brooks, E. Skewes, D. Benson, Design of a Foot Fixation Interface
for an Ankle-Foot Orthosis Testing Apparatus, Presented at the 7th SC-LIFE
Colloquium of Undergraduate Research, Morris College, April 4, 2009, Sumter,
South Carolina
T. Warrick, D. Benson, R. Brooks, E. Skewes, J.D. DesJardins, Design of an
Ankle Motion System for an Ankle-Foot-Orthosis Testing Apparatus, Presented at
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
the Seventh Annual NIH-NSF BBSI & Second Annual NASA-REU SSBR
Symposium, Poster, July 23, 2009, Clemson, SC
M. Wabler, E. Alvarez, J.D. DesJardins, Exploration, Development, and
Implementation of the Clemson University Implant Retrieval Program (CUIRP),
Presented at the Seventh Annual NIH-NSF BBSI & Second Annual NASA-REU
SSBR Symposium, Podium, July 23, 2009, Clemson, SC
B. Roach, J. Matheny, M. Spinelli, R. Blob, J.D. DesJardins, High Speed
Kinematic Video Analysis of a Unicompartmental Replacement During Simulated
Gait, Presented at the Seventh Annual NIH-NSF BBSI & Second Annual NASAREU SSBR Symposium, Poster, July 23, 2009, Clemson, SC
GP. Colbath, QK. Kang, X. Li, BR. Whatley, V. Beachley, X. Liu, J DesJardins,
PC. Chou, M. Kindy, X. Wen, Augmentation of Rotator Cuff Repair Using A
Bioengineering Approach And Myostatin Inhibitors, Proceedings of the Medical
University of South Carolina, Department of Orthopaedics, Siegling Research
Day, April 16th, 2010, , Charleston, SC *
Award for Best Basic Science Paper
M. Zilkoski, W. Mckibbin, J. DesJardins, W.R. Barfield, Comparison of Porcine
Achilles Tendon Repair Techniques with a Fatiguing and Failure Protocol.
Proceedings of the Medical University of South Carolina, Department of
Orthopaedics, Siegling Research Day, April 16th, 2010, Charleston, SC *
M. Elpers, E. Alvarez, J.D. DesJardins, Comparative Analysis of Surface
Scratching of Retrieved Femoral Components in the NexGen PS Design,
Presented at the 8th SC-LIFE Colloquium of Undergraduate Research, April 15,
2010, Clemson, South Carolina*
T.J. Warrick, S.A. Bielby, D. Benson, R. Brooks, E. Skewes, E. Alvarez, C.
Dunning, J.D. DesJardins, The Effect of Cut-Line Location on the 3D Rotational
Stiffness of an Ankle Foot Orthosis, Presented at the 8th SC-LIFE Colloquium of
Undergraduate Research, April 15, 2010, Clemson, South Carolina*
B. Roach, J. McKee, J.D. DesJardins, The Development of Human Extremity
Functional Ranges of Motion Measurement Protocols with Application to
Activities of Daily Living in Space, Presented at the 8th SC-LIFE Colloquium of
Undergraduate Research, April 15, 2010, Clemson, South Carolina
J.D. DesJardins, E. Alvarez, M. Wabler, R. Winchester, A. Nissan, A. Justice, M.
Elpers, H. Cash, Clemson University Retrieval of Explants Program in
Orthopaedics (CU-REPO) , Presented at the 5th Annual Focus on Creative Inquiry
Poster Forum, Poster #80, April 12, 2010, Clemson, SC.
H. Cash, M. Elpers, M.E. Wabler, E. Alvarez, J.D. DesJardins, Total Knee
Replacement Explant Surface Damage Characterization, Presented at the Spring
2010 Undergraduate Research Symposium, Poster, Clemson University, April 19,
2010, Clemson, SC.
S.A. Bielby, T.J. Warrick, D. Benson, R. Brooks, E. Skewes, E. Alvarez, J.D.
DesJardins, The Effect of Cut-Line Location on the 3D Rotational Stiffness of an
Ankle Foot Orthosis, Presented at the Spring 2010 Undergraduate Research
Symposium, Clemson University, Presentation #7, April 19, 2010, Clemson, SC.
E.E. Sloan, J.D. DesJardins, Protocols for Posterior Stabilized Total Knee Joint
Replacement Wear Testing and Damage Characterization, Presented at the Spring
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
2010 Undergraduate Research Symposium, Poster, Clemson University, April 19,
2010, Clemson, SC.
B. Roach, J. McKee, J.D. DesJardins, The Development of Human Extremity
Functional Ranges of Motion Measurement Protocols with Application to
Activities of Daily Living in Space, Presented at the Spring 2010 Undergraduate
Research Symposium, Poster, Clemson University, April 19, 2010, Clemson, SC.
Marty Shea Hippotherapy SPRI, July 15, 2011
Tyler Watt Hippotherapy, SPRI, July 15, 2011
V. Baker, W. Reece, J.J. Rodrigo, J.D. DesJardins, Correction of Varus and
Valgus Misalignments via Tibial Osteotomies, Proceedings of the Calhoun Honors
College EUREKA! Poster Forum, August 26, 2011, Clemson University,
Clemson, SC.
K. Harfmann, Design and Testing of an Anatomical Cervical Orthosis Testing
Apparatus, HHMI/SC Life Undergraduate Summer Research Symposium,
Presentation, September 21, 2011, Clemson, SC.
J.V. Breitmeier, D. Kwartowitz, J.N. Gowdy, J.D. DesJardins, Computer Aided
Image Analysis of Retrieved Metallic Femoral Knee Implant Surface Damage,
Proceedings of the SFB Biomaterials Day Conference, Poster#1, October 1, 2011,
Clemson, SC
R.J. Rusly, J.T. Kim, K. Fruscello, T. Bacro, W.R. Barfield, W.K. McKibbin, J.D.
DesJardins, Comparison of Achilles Tendon Suture Repair Techniques and
Materials: Krackow vs. Modified Mason-Allen and Fiberwire vs Ethibond Under
Cyclic Loading in an In-Vitro Bovine Model, Proceedings of the SFB Biomaterials
Day, Poster #4, October 1, 2011, Clemson, SC
W.D. Simpson III, A.D. Bries, S.J. Tolan, M.K. Harman, R.J. Hawkins, and J.D.
DesJardins, Implant Alignment Reproducibility in a Reverse Shoulder
Arthroplasty Micromotion Study, Proceedings of the SFB Biomaterials Day
Conference, Poster, October 1st, 2011, Clemson, SC
J.H. Ball, K. Norasak, E. Lucas, T. Kieu and J.D. DesJardins, The Effect of
Proton-Source Radiation on the Wear Properties of Ultra High Molecular Weight
Polyethylene, Proceedings of the SFB Biomaterials Day Conference, Poster,
October 1st, 2011, Clemson, SC
M. Cole, J. Arnosky, B. Walker, S. Neuhoff, R. Blob, K. Vernon, and J.D.
DesJardins, Assessment of Horse-Rider Kinematic Variables During
Hippotherapy, Proceedings of the SFB Biomaterials Day Conference, Poster,
October 1, 2011, Clemson, SC.
R.M. Halsey, K.M. Harfmann, E. Nuwass, D.B. Ellegala, J.S. Nicholas, D. Dean,
and J.D. DesJardins, Design of an Anatomical Cervical Orthosis Testing
Apparatus and Preliminary Results, Proceedings of the SFB Biomaterials Day
Conference, Poster, October 1, 2011, Clemson, SC.
C.J. Wright-Walker, J.D. DesJardins, F. Alexis, and M. LaBerge, Tribological
Evaluation of a Drug Enriched Ultra-High Molecular Weight Polyethylene for
Enhanced Total Joint Replacement Bearing Surface Functionality, Proceedings of
the SFB Biomaterials Day Conference, Presentation#3, October 1, 2011,
Clemson, SC.
33. E. Alvarez, M.K. Harman, J.D. DesJardins, Surface Damage Classification and
Training Method for Evaluating Metal Bearing Surfaces of Retrieved Femoral
Components, Proceedings of the SFB Biomaterials Day Conference, Presentation
#4, October 1st, 2011, Clemson, SC
34. J.C. Ivester, J.B. Matheny, C.E. Golightly, J.D. DesJardins, Wear Particle
Analysis of HXL+VitE Blended and DCM UHMWPE Tibial Portion of the DJO
3DKnee System, Proceedings of the SFB Biomaterials Day Conference, Poster#5,
Presentation #6, October 1st, 2011, Clemson, SC.
35. C.J. Eljach, N. Mitchell, B. Lodge, J. Sharp, M. Kennedy, and J.D. DesJardins,
Friction Testing of Stainless Steel Micropatterned Surfaces for Orthopaedic
Bearing Surfaces, Proceedings of the SFB Biomaterials Day Conference, Podium
and Poster, October 1st, 2011, Clemson, SC.
36. C.J. Eljach, N. Mitchell, B. Lodge, J. Sharp, M. Kennedy, and J.D. DesJardins,
Friction Testing of Stainless Steel Micropatterned Surfaces for Orthopaedic
Bearing Surfaces, Proceedings of the Louis Stokes South Carolina Alliance for
Minority Participation Conference, November 4th, 2011, Orangeburg SC.
37.
Research Reports
1. J.D. DesJardins, L.C. Benson and M. LaBerge from Clemson University. A Final
Report to Biomet, Inc., Warsaw, IN. Unconstrained Total Knee Replacement
Wear Testing Investigation, (1999)
2. J.D. DesJardins and M. LaBerge from Clemson University. A Final Report to
Smith&Nephew, Inc., Memphis, TN. Accelerated Wear Testing of Roughened
Ceramic Total Knee Replacements (1999)
3. J.D. DesJardins and M. LaBerge from Clemson University. A Final Report to
Depuy Orthopaedics, Warsaw, IN. Kinematic Performance Assessment of Total
Knee Replacement Designs (1999)
4. J.D. DesJardins and M. LaBerge from Clemson University. A Final Report to
Wright Medical Technology, Alexandria, TN. Pivot Design Total Knee
Replacement Wear Testing Investigation (2000)
5. L.C. Benson, J.D. DesJardins and M. LaBerge from Clemson University. A Final
Report to Sulzer Orthopedics, Austin, TX. Enhanced Loading Protocol
Development for Total Knee Replacement Wear Testing (2000)
6. J.D. DesJardins and M. LaBerge from Clemson University. A Final Report to
Tekia, Inc., Irvine, CA. The Entrapment Performance of the Novel Acrylic IntraOcular Lenses (2000)
7. J.D. DesJardins and M. LaBerge from Clemson University. A Final Report to
Wright Medical Technology, Alexandria, TN. Advanced Kinematic Performance
Assessment of Total Knee Replacement Designs (2001)
8. J.D. DesJardins and M. LaBerge from Clemson University. A Final Report to
Schlafhorst, Inc., Raleigh, NC. The Surface Roughness Analysis Of Six Comb
Roll Rings For Textile Combing (2001)
9. J.D. DesJardins and M. LaBerge from Clemson University. A Final Report to
Sulzer Orthopedics, Austin, TX. Enhanced Lubricant Protocol Development for
Total Knee Replacement Wear Testing (2001)
10. J.D. DesJardins and M. LaBerge from Clemson University. A Final Report to
EuroCrystal, Toulouse, France. The Entrapment Performance of the New Haptic
Intra-Ocular Lenses (2002)
11. J.D. DesJardins and M. LaBerge from Clemson University. A Final Report to
Ortho Development Corporation, Draper, UT. Stair-Step Damage Wear Testing of
Posterior Stabilized Total Knee Replacements (2002)
12. J.D. DesJardins and M. LaBerge from Clemson University. A Final Report to
Sulzermedica Ltd., Switzerland. Mobile Bearing Knee Total Knee Replacement
Wear Testing Investigation (2002)
13. J.D. DesJardins and M. LaBerge from Clemson University. A Final Report to
Centerpulse Orthopedics Ltd., Switzerland. Rotating Mobile Bearing Knee Total
Knee Replacement Wear Testing Investigation (2002)
14. J.D. DesJardins and M. LaBerge from Clemson University. A Final Report to
Biomet Inc., Warsaw, IN. Unicondylar Total Knee Replacement Wear Testing
Evaluation (2003)
15. J.D. DesJardins and M. LaBerge from Clemson University. A Final Report to
Stryker, Howmedica, Osteonics, Mahwah, NJ. Preliminary Investigation of
Hydrogel Performance for Orthopaedic Bearing Applications (2003)
16. J.D. DesJardins and M. LaBerge from Clemson University. A Final Report to
Spartan Felt Company, Spartanburg, SC. Surface Roughness Characterization of
Novel Abrasive Pad Formulations (2003)
17. J.D. DesJardins and M. LaBerge from Clemson University. A Final Report to
Stryker, Howmedica, Osteonics, Mahwah, NJ. Advanced Investigation of
Hydrogel Performance for Orthopaedic Bearing Applications (2004)
18. J.D. DesJardins and G. Spurgeon from Clemson University. A Final Report to
Encore Medical, Ltd., Austin TX. Total Knee Replacement Wear Testing
Investigation (2007)
19. J.D. DesJardins and G. Spurgeon from Clemson University. A Collaborative
Report to Encore Medical, Ltd., Austin TX. Total Knee Replacement Wear
Testing Particle Analysis and Literature Review (2008)
20. J.D. DesJardins and C. Vaidya from Clemson University. A Final Report to DJO
Surgical Inc., Austin TX. Total Knee Replacement Wear Testing Investigation
(2008)
21. S. Alvarez, J.D. DesJardins from Clemson University. A Collaborative Report to
DJO Surgical Inc., Austin TX. Pin-on-Disk Wear Testing of Novel Metallic
Surface Treatments for Total Joint Replacements (2009)
22. S. Alvarez, C. Wright-Walker, J.D. DesJardins from Clemson University. A
Collaborative Report to PolyMed, Inc., Pendleton SC. Pin-on-Disk Wear Testing
of Novel Polymer Treatments for Medical Applicatons (2009)
23. J.D. DesJardins and C. Vaidya from Clemson University. A Collaborative Report
to DJO Surgical Inc., Austin TX. Total Knee Replacement Wear Testing
Investigation (2009)
24. J.D. DesJardins. Effects of Space Flight Radiation on Polymer Material
Properties for Bearing and Structural Applications, A Final Report for the SC
Space Grant Consortium Palmetto Academy Faculty Awards. Charleston, SC.,
October, 2010.
25. J.D. DesJardins J. Ivester, J. Matheny, C. Golightly from Clemson University. A
Collaborative Report to DJO Surgical Inc., Austin TX. Wear Particle Analysis of
HXL+VitE Blended and DCM UHMWPE Tibial Portion of the DJO 3DKnee
System, September 2011.
26. J.D. DesJardins. Effects of Space Flight Radiation on Polymer Material Properties
for Bearing and Structural Applications, A Final Report for the SC Space Grant
Consortium Palmetto Academy Faculty Awards. Charleston, SC., October, 2011.
INVITED PRESENTATIONS
1. J.D. DesJardins Grand Rounds, Allegheny Singer Research Institute, 1992
2. J.D. DesJardins Simposia, University of Pittsburgh, 1993
3. J.D. DesJardins, Grand Rounds, Johns Hopkins University Hospital, Baltimore,
MD, 1996
4. J.D. DesJardins, Interview Lecture, Centre for Biomedical Engineering,
Stanmore, UK, 1997
5. J.D. DesJardins, (In substitution for Professor Peter S. Walker) The Basics of
Biomechanical Testing; An Opening Precourse Lecture for Clinicians.
Presentation given at the 11th Annual Meeting of the European Society of
Biomechanics (ESB), July 8-11, 1998, Toulouse, France.
6. J.D. DesJardins, Site Visit to Smith & Nephew, Inc., Memphis, TN, 2000
7. J.D. DesJardins, Site Visit to Sofamore Danek, Memphis, TN, 2000
8. J.D. DesJardins, Site Visit to Wright Medical Technologies, Arlington, TN, 2000
9. J.D. DesJardins, BioE 800 Seminar Series, Clemson University, 2001
10. J.D. DesJardins, BioE 800 Seminar Series, Clemson University, 2002
11. J.D. DesJardins, BioE 800 Seminar Series, Clemson University, 2005
12. J.D. DesJardins, Invited Lecture, Marshall University School of Medicine, 2006
13. J.D. DesJardins, Invited Lecture and Workshop, Hospital For Special Surgery,
NY, NY, 2007
14. J.D. DesJardins, Invited Web Seminar, Wear Testing Results of the DJO Surgical
3DKnee System. DJO Surgical, Austin, TX, 2008
15. J.D. DesJardins, Invited Lecture, Basic Biomechanics Review and Overview and
Lower Extremity Biomechanics. Marshall University School of Medicine, 2008
16. J.D. DesJardins, Invited Lecture, Total Knee Joint Replacement Simulation.
Hospital for Special Surgery, Department of Biomechanics, NY, NY, March 2009
17. J.D. DesJardins, Invited Lecture, Clemson University Bioengineering and
Tribology Research. Orthopaedic Institute of Rizzoli, Bologna, Italy, June 2009
18. J.D. DesJardins, Presentation, Translational Orthopaedic Research, Greenville
Hospital System, Department of Surgery, Clemson University Bioengineering
Summit, Greenville, SC, October 2011
PATENTS/DISCLOSURES
Patent Disclosures
“Use of UHMWPE Wear For Drug Delivery”, Clemson University, Patent
Disclosure (2005), J. DesJardins, M. LaBerge
J. DesJardins, M. Tedder, B. Hutto, D. Reed, L. Sierad, “A Device to Test and
Characterize AFO’s”, Clemson University, Patent Disclosure (2007)
Richardson, J. Schulte, A. Grujicic, S. Canty, A. Shrader, A. Smalls, J.
DesJardins, M. Laberge, “LiveWire Comb Electrode”, Clemson
University Research Foundation, Patent Disclosure, CURF#2011-002,
August 23, 2010
Taylor, C. Wolla, S. Skoog, A. Marusich, R. Merrell, K. Rusaw, D. Dean, D.
DesJardins “Tigertrode Microarray Electrode”, Clemson University
Research Foundation, Patent Disclosure, CURF #2010-060, August 23,
2010
J. DesJardins, C. Walker, M. LaBerge, “Service Induced Byproducts for
Localized Drug Delivery in Orthopaedic Implants”, Clemson University,
Patent Pending: 13/360,020.
Patent Filings
DesJardins, Wright-Walker, LaBerge, UHMWPE and its Service Induced
Byproducts as Localized Drug Delivery Carriers for Use in Orthopaedic
Bearing Applications. Clemson University Research Foundation,
Provisional Patent 61/437,258. April, 2011
HONORS AND AWARDS
Carnegie Mellon University, Bioengineering Summer Institute Participant (1991)
University of Pittsburgh, Graduate Student Stipend Recipient (1992)
Johns Hopkins University, Department of Orthopaedic Surgery, Biomechanics
Research Laboratory, Researcher of the Year (1995)
Johns Hopkins University, Department of Orthopedics, Travel Award Participant
(1996)
Sigma Xi, National Research Honor Society, Clemson University Chapter (2000)
Clemson University, Bioengineering Graduate Seminar Series, Best Presenter
Award (2001)
Alpha Epsilon Lambda, National Graduate Student Honor Society (2005)
Georgia Tech, Microelectronics Research Center, Trailblazer Scholarship
Recipient (2006)
Clemson University, Service Alliance Faculty Fellowship (2007)
SPONSORED RESEARCH
Radiographic Evaluation of Acetabular Orientation in Total Hip Arthroplasty,
Allegheny-Singer Research Institute, Undergraduate Research Assistant,
$5000, (1990-1991)
Contact Stress Distributions in Malreduced Intraarticular Distal Radius Fractures,
Allegheny-Singer Research Institute, Graduate Research Assistant, $5000,
(1990-1991)
Identification of Relevant Mechanical Parameters in Malreduced Intra-articular
Fractures of the Distal Radius, Arthritis Foundation, Western Pennsylvania
Chapter, Graduate Research Assistant, $10,500, (1992-1993)
Carpal Kinematics in Displaced Distal Radius Fractures, Albert B. Ferguson, Jr.,
M.D. Orthopaedic Research Foundation, Graduate Research Assistant,
$10,000, (1993-1994)
Effect of Intercondylar Notchplasty/ Roofplasty on the Patellofemoral
Articulation, Mt. Carmel Health Center, Columbus, OH, Technician , $4825,
(1994-1995)
Distal Resection Acromioclavicular Joint Impingement Investigation, Hospital of
the University of Pennsylvania Shoulder Group, Philadelphia, PA, CoInvestigator, $12,500, (1995-1996)
Effect of Tibial Tray Mal-Rotation on Patellofemoral Mechanics, Walter Reed
Army Medical Hospital, Bethesda, MD, Technician, $10,000, (1996)
International Traveling Research Stipend, Johns Hopkins University, Department
of Orthopedics, Baltimore, MD, Principal Investigator, $46,000, (1997-1998)
Unconstrained Total Knee Replacement Wear Testing Investigation, Biomet, Inc.,
Warsaw, IN, Researcher, $60,000, (1998-1999)
Accelerated Wear Testing of Roughened Ceramic Total Knee Replacements,
Smith&Nephew, Inc., Memphis, TN, Researcher, $45,000, (1999)
Kinematic Performance Assessment of Total Knee Replacement Designs, Depuy
Orthopaedics, Warsaw, IN, $5,000 (Co-Investigator) (1999)
Pivot Design Total Knee Replacement Wear Testing Investigation, Wright
Medical Technology, Alexandria, TN, $44,008 (Co-Investigator) (2000)
Enhanced Loading Protocol Development for Total Knee Replacement Wear
Testing, Sulzer Orthopedics, Austin, TX, Co-Investigator, $10,000 (In
Materials), (2000)
The Entrapment Performance of the Novel Acrylic Intra-Ocular Lenses, Tekia,
Inc., Irvine, CA, Co- Investigator , $2,600, (2000)
Advanced Kinematic Performance Assessment of Total Knee Replacement
Designs, Wright Medical Technology, Alexandria, TN, Principal Investigator,
$6,000, (2001)
The Surface Roughness Analysis Of Six Comb Roll Rings For Textile Combing,
Schlafhorst, Inc., Raleigh, NC, Co-Investigator, $2,025, (2001)
Enhanced Lubricant Protocol Development for Total Knee Replacement Wear
Testing, Sulzer Orthopedics, Austin, TX, Co-Investigator, $10,000 (In
Materials), (2001)
The Entrapment Performance of the New Haptic Intra-Ocular Lenses,
EuroCrystal, Toulouse, France, Co-Investigator, $3,000, (2002)
Stair-Step Damage Wear Testing of Posterior Stabilized Total Knee
Replacements, Ortho Development Corporation, Draper, UT, Co-Investigator,
$21,779, (2002)
Mobile Bearing Knee Total Knee Replacement Wear Testing Investigation,
Sulzermedica Ltd., Switzerland, Co-Investigator, $44,008, (2002)
Rotating Mobile Bearing Knee Total Knee Replacement Wear Testing
Investigation, Centerpulse Orthopedics Ltd., Switzerland, Co-Investigator,
$44,008, (2002)
Unicondylar Total Knee Replacement Wear Testing Evaluation, Biomet Inc.,
Warsaw, IN., Co-Investigator, $55,018, (2003)
Preliminary Investigation of Hydrogel Performance for Orthopaedic Bearing
Applications, Stryker, Howmedica, Osteonics, Mahwah, NJ, Co-Investigator,
$23,725, (2003)
Surface Roughness Characterization of Novel Abrasive Pad Formulations,
Spartan Felt Company, Spartanburg, SC., Co-Investigator, $2,100, (2003)
Advanced Investigation of Hydrogel Performance for Orthopaedic Bearing
Applications, Stryker, Howmedica, Osteonics, Mahwah, NJ, Co-Investigator,
$59,100, (2004)
Bioinformatics and Bioengineering Summer Institute, Biomaterials Science and
Engineering NIH-NSF, Clemson University, Co-Investigator and Mentor,
$792,000, (2003-2007)
Biomechanical Investigation of Cartilage Micro-fracture Techniques, Orthopaedic
Research Foundation of the Carolinas, Spartanburg, SC, Principal
Investigator, $10,000, (2007)
Biomechanical Investigation of High Tibial Osteotomy Wedge Angulation
Techniques, Orthopaedic Research Foundation of the Carolinas, Spartanburg,
SC, Principal Investigator, $5,000, (2007)
Total Knee Joint Replacement Wear Testing Investigation, Encore Medical, Ltd.,
Principal Investigator, $65,832, (2007)
Support of Orthopaedic Tribology Research, Encore Medical, Ltd., Principal
Investigator , $7,500, (2008)
Total Knee Joint Replacement Wear Testing Investigation: Phase 2, DJO
Surgical, Ltd., Principal Investigator, $67,512, (2008-2010)
Support for Orthopaedic Tribology Research, DJO Surgical, Ltd., Principal
Investigator, $22,500, (June 2009)
Laboratory of Orthopaedic Bearings Research Support, Polymed, Inc., Principal
Investigator, $4,000, (June 2009)
Laboratory Support for Tribology Research, DJO Surgical, Ltd., Principal
Investigator, $36,250, (Aug 2009)
Orthopaedic Tribology Laboratory Support, DJO Surgical, Ltd., Principal
Investigator, $18,125, (Nov 2009)
Research Support for Tribology Laboratory, DJO Surgical, Ltd., Principal
Investigator, $18,125, (Jan 2010)
Orthopaedic Research Support for Design Laboratory, DJO Surgical, Ltd.,
Principal Investigator, $36,250, (March 2010)
Effects of Space Flight Radiation on Polymer Material Properties for Bearing and
Structural Applications, South Carolina Space Grant Consortium, Principal
Investigator, $16,000 (2010-2011)
Orthopaedic Research Support for Design Laboratory, Small Animal Surgery SC
Veterinary Specialists, Surgery Department, Columbia, SC.,
Principal Investigator, $1,750 (February 2011)
Effects of Space Flight Radiation on Polymer Material Properties for Bearing and
Structural Applications, South Carolina Space Grant Consortium, Principal
Investigator, $16,000 (2011-2012)
Emphasizing Core Calculus Concepts Using Biomedical Applications to Engage,
Mentor and Retain STEM students, NSF,
Co-Investigator, $190,000 (2011-2013)
DESIGN RELATED SPONSORED ACTIVITY
Rhythmlink International, Senior Design
Investigator, $7,500 (2009-2010)
North American Rescue, Senior Design
Investigator, $15,000 (2010-2011)
Tactical Medical Solutions, Senior Design
Investigator, $15,000 (2010-2011)
ABTECH Scientific, Senior Design
Investigator, $7,500 (2010-2011)
OTHER SPONSORED ACTIVITY
Service Learning Faculty Fellowship Funding, Clemson University Service
Learning Alliance, Principal Investigator, $1,200, (2007)
EUREKA Undergraduate Research, Clemson University, EUREKA Summer
Program, Mentor $500, (2007)
Study Abroad Program Development Grant, Clemson University, Office of
International Affairs, Principal Investigator, $5000, (2007)
Undergraduate Research and Community Outreach in AFO Mechanical Testing,
Howard Hughes Medical Institute, SC-LIFE Foundation, Principal Investigator,
$3,300, (2008-2009)
Study Abroad Program Development Award, Clemson University, Office of
International Affairs, Principal Investigator, $5000, (2008-2009)
Undergraduate Student Travel Award for Conference Presentation, Clemson
University, Service Learning Institute, Principal Investigator, $413, (2009)
Undergraduate Student Travel Award for Conference Presentation, Howard
Hughes Medical Institute, SC-LIFE Foundation, Principal Investigator, $500,
(2009)
Undergraduate Research in Metallic Implant Retrieval Analysis, Howard Hughes
Medical Institute, SC-LIFE Foundation, Principal Investigator, Student:
Timothy Warrick, $550, (2009-2010)
Undergraduate Research in Total Knee Replacement Mechanics, Howard Hughes
Medical Institute, SC-LIFE Foundation, Principal Investigator, Student:
Brendan Roach, $550, (2009-2010)
Undergraduate Research in AFO Mechanics, Howard Hughes Medical Institute,
SC-LIFE Foundation, Principal Investigator, Student: Marcella Elpers, $550,
(2009-2010)
Institutional Support of Creative Inquiry in Undergraduate Research, Clemson
University, Office of Undergraduate Studies, Principal Investigator, $2,250,
(Summer 2010)
Institutional Support of Creative Inquiry by the Office of Undergraduate Studies,
Clemson University in the following for funding amounts shown in the table:
 Math-BioE Interdisciplinary Studies, Principal Investigator
 Implant Retrieval, Principal Investigator
 Freshmen/Senior Design, Principal Investigator
 Engineering World Health, Co-Principal Investigator
 Team Tribology, Co-Principal Investigator
Semester
Math
Undergraduate Creative Inquiry Activity
Implant Design Tribology World Health Other
2008, Spring
2008, Fall
2009, Spring
2009, Fall
2010, Spring
2010, Summer
2010, Fall
2011, Spring
2011, Summer
2011, Fall
2012, Spring
$2,500
$2,500
$2,400
$2,500
Subtotals
$11,900 $14,500 $45,000 $4,000
$2,500
$2,500
$2,500
$2,250
$2,000
$1,500
$1,500
$2,000
$2,000
$
$13,000
$12,000
$2,000
$20,000
$
$1,500
$2,000
$500
$
$1,500
$2,000
$3,500
$
$7,000
Current Total
$2,250
$84,650
STUDENT ADVISING/MENTORING
Past Undergraduates
Summer 2007:
David Jamison, (Rising Senior, Johns Hopkins University), “Investigation of
Tibial Wedge Osteotomy Techniques.” NIH Bioengineering and
Bioinformatics Summer Institute, 2007
Lee Mullin, (Rising Senior, Meredith University), “Mechanical Indentation of
Cartilage Micro-fracture Treatments.” NIH Bioengineering and
Bioinformatics Summer Institute, 2007
Elizabeth Sloan, (Rising Freshman, Bioengineering, Clemson University),
“Experimental Methods in Total Knee Replacement Simulation”,
(Clemson University EUREKA Program, Summer 2007)
Fall 2007:
8 Students, (Matthew Bradshaw, Randi Corley, Katherine Cragon, Leigh Herran,
Meaghan Riemer, Caroline Sieger, Jillianne Smiley, Neil Tailor),
“Application of Mathematical Sciences and Modeling to Bioengineering
Questions” Clemson University Creative Inquiry Project, F2007
Spring 2008:
8 Students, (Matthew Bradshaw, Randi Corley, Katherine Cragon, Leigh Herran,
Meaghan Riemer, Caroline Sieger, Jillianne Smiley, Neil Tailor),
“Application of Mathematical Sciences and Modeling to Bioengineering
Questions” Clemson University Creative Inquiry Project, S2008
Summer 2008:
4 Students, (Zachary Combs, Courtney Taylor, Kara Rusaw, James McAlpine),
“International Bioengineering Research Experience, London, England”
Calhoun Honors College, Enrichment Award for Bioengineering Research
Experience at Imperial College London, BIOE450H Sum 2008
Fall 2008:
9 Students, (Virginia Ahalt, Matthew Bachstein, Todd Goodall, John Jewett,
James Segars, Neil Tailor, Robin Winchester, Paul Blichmann, Courtney
Taylor), “Application of Mathematical Sciences and Modeling to
Bioengineering Questions” Clemson University Creative Inquiry Project,
F2008
6 Students, (Shea Bielby, Laila Roudsari, Matthew Manning, Tim Warrick, Laura
Reese, Shelby Skoog), “Design and Experimental Evaluation of an AFO
Testing System” SC Life Undergraduate Research Program, Howard
Hughes Medical Institute Research Award Program, F2008-S2009
James Segars, Bioengineering Sophomore, “Investigation of Tibial Wedge
Osteotomy Techniques.” Bioengineering Undergraduate Research
(BIOE450, Fall 2008)
Shea Bielby (Junior, Bioengineering, Clemson University), “Literature Review
and Experimental Investigation of AFO Testing Device”, Bioengineering
Undergraduate Research (BIOE450H, Fall 2008)
Spring 2009:
6 Students, (Shea Bielby, Laila Roudsari, Matthew Manning, Tim Warrick, Laura
Reese, Shelby Skoog), “Design and Experimental Evaluation of an AFO
Testing System” SC Life Undergraduate Research Program, Howard
Hughes Medical Institute Research Award Program, F2008-S2009
8 Students, (Brian Burrows, Hiliary Cash, Timothy Laird, Heather Lecuyer,
Kristin Limpose, Lauren Marshall, Laura Reese, Elizabeth Sloan),
“Development of the Clemson University Orthopaedic Implant Retrieval
Program”, Creative Inquiry, Spring 2009
Shea Bielby (Junior, Bioengineering, Clemson University), “Literature Review
and Experimental Investigation of AFO Testing Device”, Bioengineering
Undergraduate Research (BIOE450H, Fall 2008), (SC-LIFE, 2008-2009),
(BioE450H, Spring 2009)
Brendan Roach (Junior, Bioengineering, Clemson University), “High-Speed
Kinematic Video Analysis of Total Joint Replacement Simulation”
(BioE450, Spring 2009)
Elizabeth Sloan, (Senior, Bioengineering, Clemson University), “Experimental
Methods in Total Knee Replacement Simulation”, (Clemson University
EUREKA Program, Summer 2007), (BioE451, Spring 2009)
Summer 2009:
Laboratory of Orthopaedic Design and Engineering, Summer Research Interns
Brendan Roach (Junior, Bioengineering, Clemson University), “High-Speed
Kinematic Video Analysis of Total Joint Replacement Simulation”
(BioE450, Spring 2009), (Summer Research Intern 2009)
Jonathan Matheny (Junior, Bioengineering, Clemson University), “High-Speed
Kinematic Video Analysis of Total Joint Replacement Simulation”
(Summer Research Intern 2009)
Michele Wabler (Junior, Bioengineering, Clemson University), “Development of
an Implant Retrieval Program and Methods”, (Summer Research Intern
2009)
Timothy Warrick (Junior, Mechanical Engineering, Clemson University), “Design
and Experimental Evaluation of an AFO Testing System” (SC-LIFE 20082009), (Summer Research Intern 2009)
Fall 2009
9 Students, (Hiliary Cash, Timothy Laird, Heather Lecuyer, Marcella Elpers,
Megan Robson, Robin Winchester, Erin Watkins, Elizabeth Sloan,
Michele Wabler), “Development of the Clemson University Orthopaedic
Implant Retrieval Program”, Creative Inquiry, Fall 2009
Jonathan Matheny (Junior, Bioengineering, Clemson University), “Medial-Lateral
Kinematic Analysis of Total Joint Replacement Simulation”, (Summer
Research Intern 2009), (BioE450 Fall 2009)
Brendan Roach (Junior, Bioengineering, Clemson University), “High-Speed
Kinematic Video Analysis of Total Joint Replacement Simulation”,
(Summer Research Intern 2009), (BioE450 Fall 2009)
Shea Bielby (Junior, Bioengineering, Clemson University), “Literature Review
and Experimental Investigation of AFO Testing Device”, Bioengineering
Undergraduate Research (BIOE450H, Fall 2008), (SC-LIFE, 2008-2009),
(BioE450H, Spring 2009), (BioE450H, Fall 2009), (SC-LIFE, 2009-2010)
Elizabeth Sloan, (Senior, Bioengineering, Clemson University), “Experimental
Methods in Total Knee Replacement Simulation”, (Clemson University
EUREKA Program, Summer 2007), (BioE451, Spring 2009), (BioE451,
Fall 2009)
Spring 2010
6 Students, (Hiliary Cash, Marcella Elpers, Robin Winchester, Amber Justice,
Michele Wabler, Ariel Nissan), “Development of the Clemson University
Orthopaedic Implant Retrieval Program”, Creative Inquiry, Spring 2010
Jonathan Matheny (Junior, Bioengineering, Clemson University), “Medial-Lateral
Kinematic Analysis of Total Joint Replacement Simulation”, (Summer
Research Intern 2009), (BioE450, Fall, 2009), (BioE450, Spring 2010)
Heather Lecuyer (Junior, Bioengineering, Clemson University), “Surface
Analysis Methodologies for Polymers in Total Joint Replacement”,
(BioE451, Fall 2009), SC-LIFE 2009-2010
Shea Bielby (Junior, Bioengineering, Clemson University), “Literature Review
and Experimental Investigation of AFO Testing Device”, Bioengineering
Undergraduate Research, (BIOE450H, Fall 2008), (SC-LIFE, 2008-2009),
(BioE450H, Spring 2009), (BioE450H, Fall 2009), (SC-LIFE, 20092010), BioE450H, Spring 2010)
Brendan Roach (Junior, Bioengineering, Clemson University), “High-Speed
Kinematic Video Analysis of Total Joint Replacement Simulation”
(Summer Research Intern 2009), (BioE450 Fall 2009), (SC-LIFE 20092010), (BioE450, Spring 2010)
Elizabeth Sloan, (Senior, Bioengineering, Clemson University), “Experimental
Methods in Total Knee Replacement Simulation”, (Clemson University
EUREKA Program, Summer 2007), (BioE451, Spring 2009), (BioE451,
Fall 2009), (BioE450H, Spring 2010)
Marcella Elpers (Senior, Bioengineering, Clemson University), “Metallic Alloy
Surface Analysis Methodologies in Total Joint Replacement”, (SC-LIFE
2009-2010), (BioE450, Spring 2010)
Summer 2010:
Chad Cummings, NASA Palmetto Academy Fellow, “Effects of Space Flight
Radiation on Polymer Material Properties for Bearing and Structural
Applications (Summer Research Intern 2010)
Laboratory of Orthopaedic Design and Engineering, Summer Research Interns
Tri Kieu, NASA Palmetto Academy Participant, “Effects of Space Flight
Radiation on Polymer Material Properties for Bearing and Structural
Applications (Summer Research Intern 2010)
Justin Marro, NASA Palmetto Academy Participant, “Effects of Space Flight
Radiation on Polymer Material Properties for Bearing and Structural
Applications (Summer Research Intern 2010)
Elizabeth Sloan, (Senior, Bioengineering, Clemson University), “Experimental
Methods in Total Knee Replacement Simulation”, (Clemson University
EUREKA Program, Summer 2007), (BioE451, Spring 2009), (BioE451,
Fall 2009), (BioE450H, Spring 2010), (Summer Research Intern 2010)
Lauren Marshall (Junior, Bioengineering, Clemson University), “Development of
Activities of Daily Living Protocols for Assessment of Space Flight
Ranges of Extremity Motion in Humans” (Creative Inquiry, Spring 2009),
(Summer Research Intern 2010)
Caleb Eljach (Junior, Bioengineering, Clemson University), “Tribological
Assessment of Micro-patterned Surfaces for Implant Bearing
Applications”, (Summer Research Intern 2010)
Virginia King, (Junior, Bioengineering, Clemson University), “Development of
an Implant Retrieval Program and Methods”, (Summer Research Intern
2010)
Brendan Roach (Junior, Bioengineering, Clemson University), “Development of
Activities of Daily Living Protocols for Assessment of Space Flight
Ranges of Extremity Motion in Humans” (Summer Research Intern 2009),
(BioE450 Fall 2009), (SC-LIFE 2009-2010), (BioE450, Spring 2010),
(Summer Research Intern 2010)
Fall 2010:
8 students, (Caleb Eljach, Amber Justice, Kevin Keith, Tri Kieu, Virginia King,
Justin Marro, Ariel Nissan), “Development of the Clemson University
Orthopaedic Implant Retrieval Program”, Creative Inquiry, Fall 2010
6 students, (Damascus Burns, Laura Gorrell, Desiree Haywood, Matthew Hope,
Patrick Ovington, Katelyn Rye), “Freshmen/Senior Design and Mentoring
Experiences in Bioengineering”, Creative Inquiry, Fall 2010
Jonathan Matheny (Junior, Bioengineering, Clemson University), “Medial-Lateral
Kinematic Analysis of Total Joint Replacement Simulation”, (Summer
Research Intern 2009), (BioE450, Fall, 2009), (BioE450, Spring 2010),
(BioE491, Fall 2010)
Shea Bielby (Junior, Bioengineering, Clemson University), “Literature Review
and Experimental Investigation of AFO Testing Device”, Bioengineering
Undergraduate Research, (BIOE450H, Fall 2008), (SC-LIFE, 2008-2009),
(BioE450H, Spring 2009), (BioE450H, Fall 2009), (SC-LIFE, 20092010), (BioE450H, Spring 2010), (BioE491H, Fall 2010)
Chad Cummings, “Effects of Space Flight Radiation on Polymer Material
Properties for Bearing and Structural Applications (Summer Research
Intern 2010), (MS&E 491 Research, Fall 2010)
Tri Kieu, “Effects of Space Flight Radiation on Polymer Material Properties for
Bearing and Structural Applications (Summer Research Intern 2010),
(BioE491, Fall 2010)
Justin Marro, “Effects of Space Flight Radiation on Polymer Material Properties
for Bearing and Structural Applications (Summer Research Intern 2010),
(BioE491, Fall 2010)
Elizabeth Sloan, (Senior, Bioengineering, Clemson University), “Experimental
Methods in Total Knee Replacement Simulation”, (Clemson University
EUREKA Program, Summer 2007), (BioE451, Spring 2009), (BioE451,
Fall 2009), (BioE450H, Spring 2010), (Summer Research Intern 2010),
(BioE491H, Fall2010)
Caleb Eljach (Junior, Bioengineering, Clemson University), “Tribological
Assessment of Micro-patterned Surfaces for Implant Bearing
Applications”, (Summer Research Intern 2010), (BioE491, Fall 2010)
Brendan Roach (Junior, Bioengineering, Clemson University), “Development of
Activities of Daily Living Protocols for Assessment of Space Flight
Ranges of Extremity Motion in Humans” (Summer Research Intern 2009),
(BioE450 Fall 2009), (SC-LIFE 2009-2010), (BioE450, Spring 2010),
(Summer Research Intern 2010), (BioE491 Research, Fall 2010)
Meredith Cole, “Assessment of Horse and Rider Kinematics During
Hippotherapy”, (BioEH491, Fall 2010)
Marcella Elpers (Senior, Bioengineering, Clemson University), “Metallic Alloy
Surface Analysis Methodologies in Total Joint Replacement”, (SC-LIFE
2009-2010), (BioE450, Spring 2010), (BioE450, Fall 2010)
Hiliary Cash, (Senior, Bioengineering, Clemson University), “Polymeric Alloy
Surface Analysis Methodologies in Total Joint Replacement”, (BioE451,
Spring 2009), (BioE451, Fall 2009), (BioE451, Spring 2010), (BioE491,
Spring 2010)
Spring 2011:
6 students, (Hannah Cash, Riley Csernica, Amber Justice, Kevin Keith, Virginia
King, Ariel Nissan), “Development of the Clemson University
Orthopaedic Implant Retrieval Program”, Creative Inquiry, Spring 2011
6 students, (Caleb Eljach, Tri Kieu, Justin Marro), “Adventures in Tribology:
Friction, Lubrication and Wear”, Creative Inquiry, Spring 2011
4 students, (Andrea Dicks, Maglin Halsey, Kaitlyn Harfmann, Tyler Youngman),
“Medical Devices for the Developing World”, Creative Inquiry, Spring
2011
12 students, (Donald Benza, Colin Burns-Heffner, Jessica Canavan, Charles
Devon, Laura Gorrell Laura, Desiree Haywood, Jarrett Lucero, Patrick
Ovington, Jamie Ralston Jamie, Daniel Ruiz, Katelyn Rye, James
Webster), “), “Freshmen/Senior Design and Mentoring Experiences in
Bioengineering”, Creative Inquiry, Spring 2011
Jonathan Matheny (Junior, Bioengineering, Clemson University), “Medial-Lateral
Kinematic Analysis of Total Joint Replacement Simulation”, (Summer
Research Intern 2009), (BioE450, Fall, 2009), (BioE450, Spring 2010),
(BioE491, Fall 2010), (BioE491, Spring 2011)
Brendan Roach (Junior, Bioengineering, Clemson University), “Development of
Activities of Daily Living Protocols for Assessment of Space Flight
Ranges of Extremity Motion in Humans” (Summer Research Intern 2009),
(BioE450 Fall 2009), (SC-LIFE 2009-2010), (BioE450, Spring 2010),
(Summer Research Intern 2010), (BioE491 Research, Fall 2010),
(BioE491, Spring 2011)
Shea Bielby (Junior, Bioengineering, Clemson University), “Literature Review
and Experimental Investigation of AFO Testing Device”, Bioengineering
Undergraduate Research, (BIOE450H, Fall 2008), (SC-LIFE, 2008-2009),
(BioE450H, Spring 2009), (BioE450H, Fall 2009), (SC-LIFE, 20092010), (BioE450H, Spring 2010), (BioE491H, Fall 2010) , (BioEH491,
Spring 2011)
Marcella Elpers (Senior, Bioengineering, Clemson University), “Metallic Alloy
Surface Analysis Methodologies in Total Joint Replacement”, (SC-LIFE
2009-2010), (BioE450, Spring 2010), (BioE450, Fall 2010), (BioE491,
Spring 2011)
Hiliary Cash, (Senior, Bioengineering, Clemson University), “Polymeric Alloy
Surface Analysis Methodologies in Total Joint Replacement”, (BioE451,
Spring 2009), (BioE451, Fall 2009), (BioE451, Spring 2010), (BioE491,
Spring 2010), (BioE491, Spring 2011)
Elizabeth Sloan, (Senior, Bioengineering, Clemson University), “Experimental
Methods in Total Knee Replacement Simulation”, (Clemson University
EUREKA Program, Summer 2007), (BioE451, Spring 2009), (BioE451,
Fall 2009), (BioE450H, Spring 2010), (Summer Research Intern 2010),
(BioE491H, Fall2010), (BioE491, Spring 2011)
Meredith Cole, (Junior, Bioengineering, Clemson University), “Assessment of
Horse and Rider Kinematics During Hippotherapy”, (BioEH491, Fall
2010), (BioE491, Spring 2011)
Caleb Eljach (Junior, Bioengineering, Clemson University), “Tribological
Assessment of Micro-patterned Surfaces for Implant Bearing
Applications”, (Summer Research Intern 2010), (BioE491, Fall 2010),
(BioE491, Spring 2011)
John Ivester, (Junior, Bioengineering, Clemson University), “Biomechanical
Analysis of Total Hip Replacement Dislocation”, (BioE491, Spring 2011)
Wooten Simpson, (Junior, Bioengineering, Clemson University), “Implant
Alignment Reproducibility in a Reverse Shoulder Arthroplasty
Micromotion Study”, (BioE491, Spring 2011)
Miles Ware, (Junior, Bioengineering, Clemson University), “Effect of Platelet
Rich Plasma Augmented Microfracture on Cartilage Regeneration in a
Lapine Model”, (BioE491, Spring 2011)
Simone Neuhoff (Junior, Mechanical Engineering, Clemson University), “The
Assessment of Horse and Rider Kinematics During Hippotherapy”,
(ME491, Spring 2011)
Summer 2011:
17 Clemson Students
High School: Governors School for Math and Science, SPRI Program:
Marty Shea McLaughlin, Tyler Watt
Rising Freshmen: EUREKA Program
Victoria Baker, Winston Reece
Rising Sophomores: Alex Devon, Patrick Ovington
Rising Juniors and Seniors: Trey Simpson, Beryl Walker, Virginia King,
Amber Justice, Caleb Eljach, Miles C. Ware, Meredith Cole,
Jonathan Matheny, John Ivester, Kaitlyn Harfmann, Maglin Hasley
Current Undergraduates
Fall 2011:
7 students, (Nicole Durig, Alison Lamb, Kathleen Parker, Ryan Quinn, Riley
Csernica, Kevin Keith), “Development of the Clemson University
Orthopaedic Implant Retrieval Program”, Creative Inquiry, Fall 2011
2 students, (Taylor Pate and Jessica Canavan), “Adventures in Tribology:
Friction, Lubrication and Wear”, Creative Inquiry, Fall 2011
10 students, (Colin Burns-Heffner, Kevin Keith, Matthew Kofoed, Molly Russell,
Margo Toney, Laura Wiles, Andrea Dicks, Maglin Halsey, Kaitlyn
Harfmann, Tyler Youngman), “Medical Devices for the Developing
World”, Creative Inquiry, Fall 2011
7 students, (Brian Gavin, Ryan Holdren, Dinkelpreet Kaur, Emily O’Connor,
Joshua Rodriguez, Kyle Spearman), “Freshmen/Senior Design and
Mentoring Experiences in Bioengineering”, Creative Inquiry, Fall 2011
Jonathan Matheny (Senior, Bioengineering, Clemson University), “MedialLateral Kinematic Analysis of Total Joint Replacement Simulation”,
(Summer Research Intern 2009), (BioE450, Fall, 2009), (BioE450, Spring
2010), (BioE491, Fall 2010), (BioE491, Spring 2011), (BioE491, Fall
2011)
Meredith Cole, (Junior, Bioengineering, Clemson University), “Assessment of
Horse and Rider Kinematics During Hippotherapy”, (BioEH491, Fall
2010), (BioE491, Spring 2011) , (BioEH491, Fall 2011)
Caleb Eljach (Junior, Bioengineering, Clemson University), “Tribological
Assessment of Micro-patterned Surfaces for Implant Bearing
Applications”, (Summer Research Intern 2010), (BioE491, Fall 2010),
(BioE491, Spring 2011) , (BioE491, Fall 2011)
John Ivester, (Junior, Bioengineering, Clemson University), “Biomechanical
Analysis of Total Hip Replacement Dislocation”, (BioE491, Spring 2011)
Wooten Simpson, (Junior, Bioengineering, Clemson University), “Implant
Alignment Reproducibility in a Reverse Shoulder Arthroplasty
Micromotion Study”, (BioE491, Spring 2011) , (BioE491, Fall 2011)
Miles Ware, (Junior, Bioengineering, Clemson University), “Effect of Platelet
Rich Plasma Augmented Microfracture on Cartilage Regeneration in a
Lapine Model”, (BioE491, Spring 2011), (BioEH491, Fall 2011)
Alex Devon, (Sophomore, Bioengineering, Clemson University), “RSA Glenoid
Baseplate Micromotion Study”, (BioE491, Fall 2011)
Patrick Tyler Ovington, (Sophomore, Bioengineering, Clemson University),
“RSA Glenoid Baseplate Micromotion Study”, (BioE491, Fall 2011)
Ryan Freed, (Junior, Bioengineering, Clemson University), “Surface Damage
Assessment in Metallic Femoral Components”, (BioE491, Fall 2011)
Tri Kieu, (Senior, Bioengineering, Clemson University), “Effect of Proton
Radiation on the Wear Properties of UHMWPE”, (BioE491, Fall 2011)
Simone Neuhoff (Senior, Mechanical Engineering, Clemson University), “The
Assessment of Horse and Rider Kinematics During Hippotherapy”,
(BioE491, Fall 2011)
Timothy Warrick (Senior, Mechanical Engineering, Clemson University),
“Design and Experimental Evaluation of an AFO Testing System” (SCLIFE 2008-2009), (Summer Intern, 2009), (SC-LIFE 2009-2010),
(ME491, Fall 2011)
Past Undergraduate Research Advising
(Primary Advisor)
Michele Wabler (B.S. in Bioengineering, Clemson University, May 2010),
“Development of a Clemson Bioengineering Orthopaedic Implant
Retrieval Program” (Summer Intern, 2009), (BioE451, Fall 2009),
(BioE451, Spring 2010), (BioE450, Spring 2010).
Post Positions Held:
Fall 2010, Research Associate, Department of Radiation Oncology and
Molecular Radiation Sciences, Johns Hopkins School of Medicine
Christopher Dunning
Lauren Marshall
Brendan Roach (Junior, Bioengineering, Clemson University), “Development of
Activities of Daily Living Protocols for Assessment of Space Flight
Ranges of Extremity Motion in Humans”, and “High-Speed Kinematic
Video Analysis of Total Joint Replacement Simulation” (Summer
Research Intern 2009), (BioE450 Fall 2009), (SC-LIFE 2009-2010),
(BioE450, Spring 2010), (Summer Research Intern 2010), (BioE491
Research, Fall 2010), (BioE491, Spring 2011)
Post Positions Held:
Fall 2011, PhD Student, Columbia University.
Shea Bielby (Junior, Bioengineering, Clemson University), “Literature Review
and Experimental Investigation of AFO Testing Device”, Bioengineering
Undergraduate Research, (BIOE450H, Fall 2008), (SC-LIFE, 2008-2009),
(BioE450H, Spring 2009), (BioE450H, Fall 2009), (SC-LIFE, 20092010), (BioE450H, Spring 2010), (BioE491H, Fall 2010) , (BioEH491,
Spring 2011)
Post Positions Held:
Fall 2011, MS Student, Bioegineering, Clemson University.
Marcella Elpers (Senior, Bioengineering, Clemson University), “Metallic Alloy
Surface Analysis Methodologies in Total Joint Replacement”, (SC-LIFE
2009-2010), (BioE450, Spring 2010), (BioE450, Fall 2010), (BioE491,
Spring 2011)
Post Positions Held:
Fall 2011, Research Engineer, Hospital For Special Surgery,
Biomechanics Department, New York, NY.
Hiliary Cash, (Senior, Bioengineering, Clemson University), “Polymeric Alloy
Surface Analysis Methodologies in Total Joint Replacement”, (BioE451,
Spring 2009), (BioE451, Fall 2009), (BioE451, Spring 2010), (BioE491,
Spring 2010), (BioE491, Spring 2011)
Elizabeth Sloan, (Senior, Bioengineering, Clemson University), “Experimental
Methods in Total Knee Replacement Simulation”, (Clemson University
EUREKA Program, Summer 2007), (BioE451, Spring 2009), (BioE451,
Fall 2009), (BioE450H, Spring 2010), (Summer Research Intern 2010),
(BioE491H, Fall2010), (BioE491, Spring 2011)
Past Graduate Advising
(Primary Advisor)
Garrett Spurgeon, (MS Non-Thesis in Bioengineering, May 2008), “Total Knee
Replacement Wear Testing Methodologies”. Current Position (2009):
Post Market Surveillance Engineer, Wright Medical Technologies,
Arlington, TN.
Paul Bonvallet (Ph.D. Candidate), “Investigation of Opening Wedge Tibial
Osteotomy Surgical Methods” (Withdrew, May 2009). Current Position
(2009): Graduate Student at the University of Alabama, Biomedical
Sciences.
Michelle McDonough (MS Non-Thesis in Bioengineering, December 2008),
“Microfracture as a Cartilage Repair Technique in the Knee: Mechanical,
Histological, and Surface Area Analysis of Cartilage Regeneration After
Microfracture Treatment in a Lapine Model”. Current Position (2009):
Clinical Regulatory Consultant, Musculoskeletal Clinical Regulatory
Advisors (MCRA), Washington, D.C.
Chatura Vaidya (MS Non-Thesis in Bioengineering, December 2009), “Reduction
of Total Knee Replacement Wear with Vitamin E Doped Highly Cross
Linked UHMWPE Using a Force Controlled Knee Simulator” Current
Position: Laboratory Technician, Michigan State University.
Michele Spinelli (Pre-Doctoral, Visiting Researcher, January-June 2009), “BiUnicondylar Knee Prosthesis Functional Assessment Utilizing ForceControl Wear Testing”. Current Position: Research Fellow at the
Universitat Pompeu Fabra Barcelona, Spain
Justin McKee (MS Non-Thesis in Bioengineering, December 2010),
“Development of Activities of Daily Living Protocols for Assessment of
Space Flight Ranges of Extremity Motion in Humans”, Current Position:
Pending
Kara Rusaw (MS Non-Thesis in Bioengineering, May 2011), “Experimental
Assessment of Total Hip Replacement Locking Ring Design Dislocation
and Relocation Mechanics”, Current Position: Synthes.
Current Graduate Advising
(Primary Advisor)
Roy Rusly (Ph.D. Candidate, Start Date August 2009), “Uni-Condylar Knee
Replacement Mechanics” (Expected Graduation, May 2012).
Estefania Alvarez (Ph.D. Candidate, Start Date August 2008), “Investigations of
Metal Surface Tribology in Total Joint Replacement Systems” (Expected
Graduation, May 2011).
Eric Lucas (Ph.D. candidate, Start Date, May 2010), “Flexion Enhancing Total
Knee Replacement Implant Design Development and Testing, Expected
Graduation, May 2014.
Justin Arnosky (MS Thesis Candidate, Start Date August 2010)
John Breitmeier (MS Non-Thesis Candidate, Start Date August 2010)
Cameron Golightly (MS Non-Thesis Candidate, Start Date August 2010)
(Committee Member/Co-Advisor)
Bernice Nzioki (M.S.), “Adhesive Performance in Automotive and Aerospace
Applications, Primary Advisor, Dr.Igor Luzinov, Department of Ceramic
and Material Science, (Graduated, May 2010)
Scott Wood (Ph.D.), “Single Cell Mechanics Modeling”, Primary Advisor, Dr.
Delphine Dean, Bioengineering, (Graduated, December 2011)
Randall Hutchison (Ph.D.) Candidate, Start Date May 2008), “Lower Extremity
Kinematic Sensor Platforms for Engineering Education”, Primary
Advisor, Dr. Lisa Benson, Department of Engineering and Science
Education. (Expected Graduation, May 2011).
Cassandra Wright (Ph.D.), “UHMWPE For Used as a Drug Delivery Vehicle”,
Primary Advisor, Dr. Martine LaBerge, Bioengineering, (Graduated,
December 2011).
Casey Gosnell (M.S. Candidate), “Ground reaction forces on the hindlimb of the
opossum ( Didelphis virginiana) during terrestrial locomotion:
implications for femoral loading, Primary Advisor, Dr. Rick Blob,
Department of Biological Sciences, (Graduated, December 2010)
Bradley Schultz (Ph.D. Student), “The corrosioin wear evolution during wear in
TiN-Ti multilayer nanolaminate systems., Primary Advisor, Marian
Kennedy, MS&E, (Expected Graduation, May 2015)
(Thesis/Dissertation Qualifier/Proposal /Defense Committee Member)
MS Defense Committee:
Daniel Reed, Proxy Larry Bowman (Primary Advisor, Dr. Martine LaBerge)
Assessment of the Fifth Metatarsal Fracture Etiology, July 10, 2008. (M.S.
in Bioengineering, August 2008)
Bernice Nzioki (Primary Advisor, Dr.Igor Luzinov), “Adhesive Performance in
Automotive and Aerospace Applications, Department of Ceramic and
Material Science, April 20, 2010, (M.S. in Material Science and
Engineering, May 2010)
Scott Wood (Primary Advisor, Dr. Dephine Dean), “Single Cell Mechanics
Modeling”, July 21, 2010, (M.S. in Bioengineering, December 2010)
Ph.D. Qualifier Committee
Bran Winn (Primary Advisor, Dr. Martine LaBerge)
Development of a Dynamic In Vitro Model of a Stented Blood Vessel to
Evaluate the Effects of Stent Strut Geometry and Material Selection on
Smooth Muscle Cell Response, External Member, October 22, 2008
Laura Bowman (Primary Advisor, Dr. Ted Bateman)
Radiation-Induced Bone Loss: A Literature Review, External Member,
June 31, 2009
Estefania Alvarez (Primary Advisor, Dr. John DesJardins)
Understanding of the damage of the metallic femoral components in total
knee replacements, Committee Member, July 29, 2010
Zhen Ma (Primary Advisor, Dr. Bruce Zhi Gao)
Electrophysiological study of bone marrow stem cells in a patterned
coculture with cardiomyocytes, External Member, July 29, 2010
Olukayode Karunwi (Primary Advisor, Dr. Anthony Guiseppi-Elie)
CNT-Prorein Conjugates for Generation-# Biosensors and Advanced
Biofuel Cells, Moderator, December 20, 2011
Ph.D. Proposal Committee
Scott Wood (Primary Advisor, Dr. Delphine Dean)
“Single Cell Mechanics Modeling”, Committee Member, July 21, 2010
Cassandra Wright-Walker (Primary Advisors, Dr. Martine LaBerge and Dr. John
DesJardins)
Estefania Alvarez (Primary Advisor, Dr. John DesJardins)
Damage of the metallic femoral components in total knee replacements,
Committee Member, ???, 2011
Ph.D. Defense Committee:
Randolph Hutchison, (Primary Advisor, Dr. Lisa Benson), October 10, 2011.
(Ph.D. in Bioengineering, December 2011)
TEACHING EXPERIENCE
Guest Lecturer, Clemson University, Bioengineering Department
BIOE 320, Structural Biomechanics, TOPIC: Knee Biomechanics 2006,
2007
BIOE 801, Biomaterials,
TOPICS: Soft Tissue Biomechanics, Biomaterials Wear Testing
BIOE 812, Orthopaedic Engineering and Pathology,
TOPICS: BioTribology, Total Joint Arthroplasty 2006, 2007
BIOE 870, Instrumentation
TOPICS: Mechanical Testing, Strain Gage Instrumentation 2002-2007
Assistant Instructor, Clemson University, Bioengineering Department
BIOE 320, Structural Biomechanics S2001
Instructor of Record, Clemson University, Bioengineering Department
BIOE 320, Structural Biomechanics S2002, S2003, S2004, S2005, S2006
BIOE 401, Senior Biomedical Design S2007, S2008, S2009 (2 Sections)
BIOE 401, Bioengineering Design Theory F2009 (2 Sections), F2010
BIOE 403, Applied Bioengineering Design, S2010, S2011
BIOE 420, Sports Engineering F2004 (Cancelled), F2007 (Cancelled),
S2008 (Cancelled)
BIOE 450, Independent Study F2007, S2009, F2009, S2010, F2010,
S2011
BIOE 451, Creative Inquiry in Implant Retrieval, S2009, F2009, S2010,
F2010, S2011
BIOE 461, International Study in Bioengineering, M2008, M2009,
M2010, M2011
BIOE 850, Graduate Biomedical Design F2007
Instructor of Record, Clemson University, Engineering and Science Education
Department
CES 102, Freshman Engineering Disciplines and Skills F2007 (2 Sections)
Co-Instructor of Record, Clemson University, Department of Materials Science
and Engineering
CME 241, Metrics Laboratory F2008 (3 Sections), S2009 (3 Sections)
New/Major Revision Course Development
Co-Instructor of Record, Clemson University
Mathematical Sciences and Bioengineering Department
MTHSC 481/BIOE451, Creative Inquiry BIOE/MTHSC F2007
This creative inquiry course was co-developed with Dr. Jim Brannan of the
MTHSC department, and explores the interaction of Biology and
Bioengineering with Mathematics. It is designed in a two semester
recurring format, with the Fall semester being a seminar series for
professors and students to present ideas at the interface between Bio and
Math, and the Spring semester being formatted for independent study and
research by undergraduates with interested Faculty in both disciplines.
Department of Materials Science and Engineering
CME241, Metrics Laboratory, F2008
This collaborative revision to a standard course requirement for MSE and BIOE
students was undertaken to insure that the course content remained
relevant to the new BIOE undergraduate majors. The Laboratory course
was significantly revised to include bioengineering research relevant
laboratories and topics while continuing to fulfill the primary objectives of
basic sophomore level laboratory skill and measurement assessment.
Instructor of Record, Clemson University, Bioengineering Department
BIOE401, Bioengineering Design Theory, F2009
As the primary instructor in undergraduate design for 2007-2009, I was influential
in the significant revision and reorganization of the departments design
curriculum into a two semester format starting in S2009. This new course
title for Bioe401 will cover the theory of design.
BIOE403 Applied Bioengineering Design, S2010
This highly anticipated new course will cover the application of theory of design
in a semester-long prototyping and evolution course structure.
BIOE461, International Study in Bioengineering, “Nanotechnology in
Bioengineering” SumI-2008
Founded the International Study Abroad Program in Bioengineering, organized
the course content, and co-taught the program instruction in Brussels,
Belgium.
BIOE451, Creative Inquiry, Adventures in Bioengineering Design, S2009,
F2009, S2010
Founded a new section of Bioengineering Creative Inquiry, recruited 8
undergraduate students for S2009, organized the course content, and led
the instruction of this technical elective course that investigates the
development of an implant retrieval program at Clemson University.
BIOE461, International Study in Bioengineering, “Movement Science in
Biomechanics” SumI-2009, SumI-2010
Successfully maintained the BioE-Brussels Study Abroad Program through its
second year, and led the development of new course curriculum for 2009
in the area of movement analysis for the mostly sophomore level
participants. I was primary instructor in Brussels, Belgium.
Teaching Assistant Mentoring
BIOE401, Biomedical Design
S2009, F2009, Lee Sierad
BIOE403, Biomedical Design
S2010, Lee Sierad
BIOE451, Creative Inquiry in Implant Retrieval
S2009, F2009, S2010, Estefania Alvarez
CME241, Metrics Laboratory
F2008, Herbert Böckels (CME), Estefania Alvarez (BIOE), Bin Qi
(CME), Casper Wright (BIOE), Jin Gou Yin (CME), Brittany McGowan
(BIOE), Laura Burka (CME), Steven Saville (CME)
S2009, Bernice Nzioki (MS&E), Estefania Alvarez (BIOE), Bin Qi
(MS&E), Casper Wright (BIOE), Michael Seeber (MS&E), James
Giammarco (MS&E), Laura Burka (MS&E), Steven Saville (MS&E)
UNIVERSITY AND PUBLIC SERVICE
Continuing Education
Clemson University Bioengineering Department, INBRE Summer Workshop
Series Organizer/Participant/Mentor 2006, 2007, 2008
“Service Learning and Science Education”, Clemson University Service Learning
Workshop, supported by the Clemson University Service Learning Fellowship
Award.
Committees
University:
Institutional Animal Care and Use Committee (IACUC)
Graduate Student Representative (2005-2006)
Scientific Representative (2006-2007)
College:
College of Engineering and Science
International Program Development Workgroup (2007-2008)
CoES International Committee (2009-Present)
Department:
Bioengineering Department
Chair, BioE-Portfolio Committee (2007- 2008)
Director, Bioengineering Study Abroad Programs (2007- Present)
Member, Bioengineering ABET Sub-Committee (2006- Present)
Member, Bioengineering Undergraduate Curriculum Committee (2007- Present)
Member, Bioengineering Creative Inquiry Committee (2008- Present)
Member, Bioengineering Assessment Committee (2009- Present)
Member, Bioengineering Patewood C Design Departmental Task Force (2007Present)
Member, Bioengineering MS Product Development and Regulatory Certificate
Curriculum Departmental Task Force (2009- Present)
Member, Bioengineering Summer Research Programs Departmental Task Force
(2009- Present)
Chair, Bioengineering International and Abroad Studies program Task Force
(2009-Present)
Community:
Anderson V Career Campus Biomedical Advisory Board Member, Anderson
County, South Carolina School District, (2010-Present)
Other Service
Faculty Advisor and Founder, Clemson University Bagpipe and Drum Club
(2006- Present).
Tour Guide and Presenter, Biomechanics and Biomaterials and Science
Ambassador, Clemson University College of Engineering and Science (1998Present)
Outreach Participant, BIOE848 Tissue Engineering Class, Clemson University
Department of Bioengineering, "Introduction to Biomaterials" Middle School
Student Demonstration and Program (2003)
Tour Guide and Presenter, Biomechanics and Biomaterials, Clemson University
Summer Science, Engineering and Architecture Enrichment Program.
"Bioengineering: Building A Better You," 9th - 12th Grade Student Program
(2005)
Clemson University, Service Learning Faculty Fellowship Participant, University
Program to support, extend and enrich the service and community outreach
component of the University curriculum and its programs. Community Outreach
Participant: Shriners Hospital of Greenville, South Carolina (2007-2009)
CU-REPO tour and interactive experience, 10 students from Hanna Westside
Hanna-Westide Extension Campus, 1225 South McDuffie Street, Anderson,
South Carolina, Shannon Merritt R.N., Health Science/Biomedical Teacher,
March 31, 2010
Bioengineering, Building a Better You (Bioengineering, BABY!) Activity Mentor
and Participant, Alexey Vertegel and Delphine Dean PI’s. CU-REPO Implant
Experience, 21 High School Students, August 3 - 7, 2010
Ravenel LEGO-League Team Visit and Tour of Design Lab with Activity, August
12, 2010, Contact: Beverly Leeper, Cost Analyst, Comptroller’s Office, Clemson
University, 864-656-1119, 864-656-5600 (fax)
Bioengineering, Building a Better You (Bioengineering, BABY!) Activity Mentor
and Participant, Alexey Vertegel and Delphine Dean PI’s. Implant Retrieval
Experience, 18 High School Students, August 8 - 12, 2011
Updated Sept 2011