OFFICIAL DISTRIBUTOR:
Grasleeuwerik 1, 5658 EG Eindhoven, The Netherlands
+31 653441393, [email protected], www.allaboutsigns.nl
Expice intelligent current loop power driver
Current loop power driver features
Make your existing
Taxiway Guidance Sign
CO2 neutral
Expice LED lighting system
• Fits every brand
• No changes necessary on the existing sign
• Usable
in two different modes.
- 1. Constant current mode.
input: 2,4 A – 6,6A
output: Constant sign luminance
• Fast mounting < 10 minutes on the spot
• CO2 neutral by solar power system
• No drilling required
- 2. Dimmable mode.
5 steps programmable dim function
input: 2,4A – 6,6A
output: see table 1
• LED
Lighting failure safety system
• Power driver failure safety system
• High efficiency system
• Usable in al FAA sizes
Loop current
Required light intensity
2.8A
10%
3.8A
30%
4.6A
50%
5.4A
80%
6.6A
100%
Table 1 Example dim function, 100% is 150 cd/m2 for yellow
Operations conditions
About Expice
• Temperature:
Development and design | Logistics | Testing |
Assembling electronic components | High-grade
producer of industrial electronics for international
customers | ISO 9001: 2008
-25 °C to +55°C
OFFICIAL DISTRIBUTOR:
Grasleeuwerik 1, 5658 EG Eindhoven, The Netherlands
+31 653441393, [email protected], www.allaboutsigns.nl
www.expice.nl
www.expice.nl
Expice Hoorn B.V. has 25 years of experience in
developing and producing electronic systems for
taxi guidance signs. Over 5000 signs equipped
with Expice electronics have been installed on
airports all over the world.
Easy mounting
Retrofit LED
Lighting System:
Cost effective!
<12mm
Features
• Long
lifetime power LED source
> 90.000 hrs
• Highly
uniform light distribution
without hot spots or shadow
• Low
maintenance intervals
are required
• Fast
• No
thick
Power consumption
The power consumption of the Expice
LED Lighting System is very low, due
to the use of the latest technology.
With a power consumption of only 17
Watt per meter sign length this will not
only safe money but also benefits to a
green environment.
Retrofitting construction
The light system is fitted just behind the
front panel and meets the ICAO annex 14,
CAP 168 requirements. No changes on the
existing sign need to be made for fitting the
LED lighting system.
fitting on location
drilling etc. required
• Operates
on 2,8A – 6,6A series circuit
with dimmable function or constant
light intensity and also on 230VAC
efficiency intelligent
power driver
Energy comparisson 1300x800mm sign
• High
The Expice retrofit LED Lighting System is
applicable in all types and sizes of taxiway
guidance signs. The LED Lighting System can
easily be fitted on field locations even without
removing the existing lighting system.
• Complies
ICAO: Annex 14, Volume 1,
para 5,4 and Appendix 4
Colour
Min. RVR < 800m
Yellow
150 cd/m2
Red
30 cd/m2
White
300 cd/m2
Applications
• Mandatory
instruction signs
signs
• VOR check point signs
• Arrester barrier signs
• Runway distance signs
• Information
Uniform light distribution without hot spots or shadow