TECHNICAL DATASHEET
PROTÉGÉ ZM PORTABLE TEST STATION
DESCRIPTION
The Scott Safety Protégé ZM monitor is supported by
a portfolio of accessories including a four-bay portable
test station.
The portable test station is available for performing
automatic bump testing and calibration of the Protégé
ZM gas monitors. The test station automatically logs
each calibration and bump test performed making
record keeping easy. The test stations simple twobutton operation and intuitive design means you will
be up and running in no time. Up to 4 monitors can be
tested or programmed simultaneously.
configuration of alarm settings, bump, calibration
and self test intervals. The Protégé ZM display can be
configured to indicate remaining service life or real
time gas readings or both.
The test station software allows accessing event
and record logs and manages critical aspects
like calibration gas expiry dates, calibration gas
concentrations and placing the Protégé ZM into
hibernation.
The Protégé ZM test station is also available in a
compact bench top version.
The test station programs the Protégé ZM allowing
FEATURES
The Protégé features a
- Durable, impact resistant case
- USB memory port
- Four monitor bays
- One calibration gas bottle storage
- Two-button operation
- Built-in gas pressure gauge
- Four independent test result LED lights
TECHNICAL DATASHEET
TECHNICAL SPECIFICATIONS
Physical Characteristics
Size
50.2cm L x 39.4cm W x 19.1cm D
Weight
6.2kg
Handling
Portable unit in enclosed case with handle
Case Material
Plastic
Carrying Attachments
Handle
User Interface
On/Off Indication
LED
Display Bump Test Results
LED
Display Calibration Test Results
LED
Display Gas Pressure
Pressure Gauge
User Interface
Buttons
Test Complete
LED
Dedicated Pass/Fail LED
Indicators for each bay
Yes
Functions
Bump Test
30 seconds default (user configuration)
Calibration Test
Less than 2 minutes
Hibernate Monitors
Yes (CO, H2S)
Program Monitors
CO, H2S, O2
Protégé Programming Options
User ID, Calibration Interval (days), Bump Interval (days). Self-Test Interval
(hours), Low Alarm, High Alarm, Display Gas Reading/Time Remaining/Both,
Hide Bump Due LED, Firmware Upgrade
Test Station Configuration
Options
Location Description, Number of Events logs to Save, Auto Power Off Time
(seconds), Calibration Gas Concentrations, Allow Calibrations (On/Off), Allow
Bump Tests (On/Off), Allow Hibernate (On/Off), Allow Configurations (On/Off),
Allow Firmware Upgrades (On/Off)
Number of Monitors Supported
Up to 4 monitors can be tested or programmed simultaneously
Power
Power Source
Replaceable, Rechargeable Lithium Ion Battery
Universal Power Supply
Yes, (240 VAC detachable power supply)
TECHNICAL DATASHEET
TECHNICAL SPECIFICATIONS
Data Storage
Event Record Content
Portable Name, Log Type, Serial Number, Firmware Version, ID, Life Remaining,
Total Number of Events, Duration of Events, Number of Self-Tests, Event Date,
Event Time, Bump Test (Yes or No), Duration (seconds), Sensor Reading (PPM or
%), Alarm Condition (Low, High)
Data Logging
Yes, 2GB of storage (removable, upgradeable)
Data Record Content
Test Date, Test Time, Test Type, Pass/Fail, TA Serial Number, TS Hardware &
Firmware Version, Location, Bay Number, Monitor Serial Number, Pass/Fail,
Monitor Hardware & Firmware Version, Display Option, Label, Sensor Type, Peak
Reading for Test, Cylinder Lot#, Cylinder Expiry, Cylinder Concentration, Alarm
Setting for Monitor, Calibrate Interval & Due Date, Bump Interval & Due Date
Data Retention
Backup to PC
Data Transmission
Infrared or removable USB stick (Scott Safety Approved)
Certifications
EMC Compliance
CE Mark, C-Tick, FCC, IC
Safety Compliance
CE, CRTLUS, IECEE CB Report
Maintenance and Warranty
Maintenance
No maintenance required
Warranty
2 years
Supported Operating Systems
Microsoft
Windows XP, Windows Vista, Windows 7
Accessories included with each Test Station
Quick Start Guide
Printed Card
Power Cord
Yes
Optional Accessories
CO Calibration Gas
CO 100 ppm 6D (103 litre)
H2S Calibration Gas
H2S 25 ppm 2AL (34 litre)
O2 Cailbration Gas
O2 16% 6D (103 litre)
Tubing
N/A
Regulator
N/A
Field Upgradeable
Yes
Software
Protégé ZM Test Station software on product CD (updates available via website)
TECHNICAL DATASHEET
ORDERING INFORMATION
PART NUMBER
DESCRIPTION
096-3467-01
Portable Test Station
077-0272
25ppm H2S Calibration Gas 34L
077-0246
100ppm CO Calibration Gas 103L
077-0039
16%Vol O2 Calibration Gas 103L
MAINTENANCE/CLEANING
Inspect the test station before and after each use to ensure all components are in operating order and undamaged.
Ensure the gas cylinder has adequate gas for testing purposes. Inspect the gas inlet port to ensure that it is clean and
free from debris. Remove gas monitors and disconnect from the power source before cleaning.
Using a soft cloth clean the test station by wiping the surfaces. If necessary a mild detergent can be used. Dry thoroughly before applying power or replacing gas monitors.
STORAGE
Storage: 0°C...+20°C, and at less than RH 75%.
DISPOSAL
Please see local authority regulations for disposal advice and locations.
Australia: Scott Safety*
PO Box 876, Guildford, NSW 2161, Australia
Phone: 131 772 Fax: 1800 651 772
Email: [email protected]
New Zealand: Scott Safety
Private Bag 93011, New Lynn, Auckland, New Zealand
Phone: (64 9) 826 1716 Fax: (64 9) 827 2288
Email: [email protected]
Website
www.ScottSafety.com
* Scott Safety is a division of Rindin
Enterprises Pty Limited ACN 089 330 914