TLSO – Light-Spinal Orthosis
...with all complementary products you need!
New accessories for the Light-Spinal Orthosis TLSO
The Light-Spinal Orthosis TLSO (item-no. 145T0 and 145T15) is a semi-finished product, ready for customisation. Its purpose
is to stabilise the entire torso, to take partial load off the ventral vertebrae as well as to minimise the lateral inclination of the
torso. Following complementary products are available for even better support:
Reclination Bracket – 145R10
The reclination bracket made of satinised, matted aluminum features pre-drilled riveting holes. The interlock connection
allows to set various angles. A waved edge creates curves evenly when finishing the reclination bracket. For better hygiene,
it is equipped with washable subclavia-pads made of skin-friendly polyamide fabric, which are connected by means of an
adjustable velour strap with y-hook-and-loop closure.
Reinforcement Boning – 145R11
The reinforcement boning consists of satinised matted aluminum and features waved edges, which form curves evenly in the
finishing-process.
Fastener System – 145R12
Moosfeldstrasse 10 · 82275 Emmering · T +49 8141 6106-0 · F +49 8141 6106-70 · www.streifeneder.com/op · [email protected]
300W123/E 2015-06
The smooth, cleanable and sturdy surface of the fastener system has been achieved by high-quality and modern manufacturing
technology. The embossed markings are helpful for shortening and punching the riveting holes.