MODELS: PDS75S-5C1 AND *PDS75SC-5C1 AFTER-COOLER AND WATER
SEPARATOR
75 cfm x 100 psi
Airman – Boxed Type Diesel Air Compressor
Airman are one of the world’s largest manufacturers of diesel compressors. Featuring
superior engineering, their products are well suited to Australia’s climatic conditions.
*Model PDS75SC-5C1 with after-cooler and water separator reduces water
condensate by up to 65% compared with downstream equipment.
Features and Benefits
Profitable
 Fuel economy and component wear
reduced via low engine idle at 1,300 rpm
Convenient Access and Storage
 Side mounted cabinet style doors provide
easy access for maintenance
 Box type compressor specifically designed
for easy mounting on vehicles for operating
and for storing in limited space - creating
the perfect compressor for dynamic
workplaces and businesses
Model PDS75S-5C1
Simple to Operate Control Panel
 Modern instrumental panel
 Auto shut-down protection and visible
warning devices
Electric Fuel Pump and Air Bleed (EFPA)
Pump
 The air is automatically primed and bled
out of the system without opening injector
lines should the compressor run out of fuel
 Results in reduced downtime and service calls
*Model PDS75SC-5C1 with
after-cooler and water separator
Maintenance Made Easier and Faster
 Side by side radiator and oil cooler – more efficient and easy to clean
 External water and oil drains
Warranty
 1 year/1,500 hour manufacturer’s warranty. Compression airend unit is also
warranted by CAPS Australia Pty Ltd for an additional six years or 8,500 hours,
(whichever occurs first) when continuously serviced at the recommended intervals
with compressor fluid and filters supplied by CAPS (refer to warranty statement for
conditions)
Durable and Reliable Construction
 Features a durable steel and powder coated finish with stainless steel hardware
 Power transmission is optimised as the engine is directly coupled to the air end
Environment
 Noise levels as low as 64 dB(A) at 7 metres
 Meets EPA Tier 3 emission standards with direct injection engine
 Optional environmental containment base designed to capture 110% of all machine
liquids
Dimensions and Weights
Overall length – metres
1,580
Overall width – metres
750
Overall height – metres
865
Wet weight – kg
S - 465, SC - 475
Free Air Delivery
m3/min (cfm)
Operating Pressure
bar (g) (psi)
Engine
Make / Model
Outlets
Fuel Tank
Capacity Litres
2.1 (75)
7 (102) Max. 8.3 (120)
Shibaura S753-C
(2) x 20A
28
Standard Options

Aftercooler and water separator (Model: PDS75SC-5C1)

Environmental containment base with forklift pockets

Battery isolator (lockable)

Emergency stop button

Fire extinguisher 2.5 (dry chemical)