L A PA R O S C O P I C I N S T R U M E N T S
589 Davies Drive
York, PA 17402
toll-free phone 866-854-8300
toll-free fax 866-854-8400
phone 717-840-9335
fax 717-840-9347
email [email protected]
www.miltex.com
INTRODUCTION
For over 50 years, Miltex® has proven to be a name you can trust in
providing the highest quality German crafted instruments
combined with experience, dependable delivery, outstanding
service, and competitive pricing.
We are pleased to introduce the new Miltex® Laparoscopic
instrument line, which offers a full selection of the most popular
patterns of precision graspers, dissectors, scissors, needle holders,
biopsy forceps, specialty instruments, and laparoscopes.
Our
ergonomic one-piece design offers greater ease of use by
eliminating the potential for lost or mis-matched components as
well as the lengthy disassembly and reassembly time needed for
modular designs. In addition, the one-piece instrument design
incorporates a flush port for easier and thorough cleaning, 360º full
rotation with brake feature, monopolar hook-up for reliable
electrosurgical use, durable insulation, and 35 cm lengths for
greater range of procedural use.
In addition, Miltex® 5 mm and 10 mm laparoscopes are fully
autoclavable, offering outstanding optical quality with brilliant high
definition image quality. Each scope is constructed for reliable
durability and comes equipped with adapters for connection to
most conventional light sources.
All Miltex® Laparoscopic instruments are German crafted with the
highest quality stainless steel and are manufactured to our
stringent specifications.
R AT C H E T H A N D L E I N S T R U M E N T
R AT C H E T H A N D L E I N S T R U M E N T
Luer Lock Flush Port
with Extra Cap
Durable Shaft Insulation
Enables thorough and easy
cleaning of the instrument lumen.
Screw-on and extra lanyard cap
provided as standard.
Added protection against
electrosurgical transfer.
Inner Gasket Seal
Prevents CO2 escape and maintains
forward fluid flow during cleaning.
360º Rotation Knob
Ergonomic feature to easily
rotate for optimum jaw position.
35 cm Shaft
Extra length for greater
instrument versatility for range
of patients.
Brake Feature
Activates when handle is fully
closed to provide tension and
firm grasp of tissue to prevent
accidental movement.
1-pc. Design
No disassembly or
assembly required.
Eliminates accidental
loss or misassembly of
components.
Comfortable Ring
Handle Design
With half-moon ratchet to allow for
firm hold of tissue.
For additional information or special instrument needs,
please contact your Miltex Sales Representative or
authorized dealer for assistance.
2
www.miltex.com
S TA N D A R D H A N D L E I N S T R U M E N T
S TA N DA R D H A N D L E I N S T R U M E N T
Inner Gasket Seal
Luer Lock Flush Port
with Extra Cap
Durable Shaft Insulation
Added protection against
electrosurgical transfer.
Enables thorough and easy
cleaning of the instrument lumen.
Screw-on and extra lanyard cap
provided as standard.
Prevents CO2 escape and maintains
forward fluid flow during cleaning.
Standard 4mm
Monopolar HF Port
For electrosurgical
procedures.
360º Rotation Knob
Ergonomic feature to easily
rotate for optimum jaw position.
35 cm Shaft
Extra length for greater
instrument versatility for range
of patients.
Brake Feature
Activates when handle is fully
closed to provide tension and
firm grasp of tissue to prevent
accidental movement.
1-pc. Design
No disassembly or
assembly required.
Eliminates accidental
loss or misassembly of
components.
Comfortable Non-Ratchet
Ring Handle Design
Free-moving design with
insulated handle.
www.miltex.com
3
G R AS P I N G F O R C E P S
Laparoscopic Grasping Forceps
.
.
.
.
.
.
.
.
.
Lightweight 1-piece design eliminates timely disassembly/reassembly and potential for mis-matched or lost components
Insulated sheath for added safety for the medical professional
Ergonomic ratchet handle with 360º finger rotation knob which allows for single-handed operation and smooth,
consistent rotation which helps to reduce hand fatigue
Rotation lock/brake feature engages when the handle is in fully closed position to maintain firm control of grasped tissue
5 mm OD and 35 cm shaft for extra length and greater instrument versatility for larger patients
Luer lock flush port for optimized cleaning of the inner lumen. Extra screw-on and lanyard caps provided as standard
REF 35-110 available with standard non-ratchet handle, monopolar HF port and fully insulated sheath and handle*
Ideal for precise manipulation and firm grasp of varying types of tissue
10 popular patterns available, all having dual action jaws for increased tissue access
Insulated Sheath with Ratchet Handle
35-100 through 35-109
REF
Description
35-100
DUAL CUP GRASPING FORCEPS, 5 mm
REF
Description
35-102
ATRAUMATIC ALLIS GRASPING FORCEPS,
standard pattern jaw length, 5 mm OD,
35 cm shaft, dual action jaws, ratchet
handle w/rotation lock, w/flush port,
insulated sheath
OD, 35 cm shaft, dual action jaws, ratchet
handle w/rotation lock, w/flush port,
insulated sheath
35-103
35-101
4
www.miltex.com
ATRAUMATIC ALLIS GRASPING FORCEPS,
RETRACTION-GRASPING FORCEPS 2X3
long jaw 20 mm length, 5 mm OD,
blunt teeth, 5 mm OD, 35 cm shaft, dual
35 cm shaft, dual action jaws, ratchet
action jaws, ratchet handle w/rotation
handle w/rotation lock, w/flush port,
lock, w/flush port, insulated sheath
insulated sheath
G R AS P I N G F O R C E P S
REF
Description
35-104
ALLIS GRASPING FORCEPS, 5 mm OD,
REF
Description
35-107
RETROGRADE GRASPING FORCEPS, 5 mm
OD, 35 cm shaft, dual action jaws, ratchet
handle w/rotation lock, w/flush port,
insulated sheath
35-108
DEBAKEY FORCEPS, straight 45 mm
35 cm shaft, dual action jaws with
interlocking distal teeth and inner serrated
jaws, ratchet handle w/rotation lock,
w/flush port, insulated sheath
fenestrated & dual action jaws, 5 mm
35-105
BABCOCK (ATRAUMATIC) GRASPING
OD, 38 cm shaft, ratchet handle
FORCEPS, 23 mm long dual action jaws,
w/rotation lock, w/flush port, insulated
5 mm OD, 35 cm shaft, ratchet handle
sheath
w/rotation lock, w/flush port, insulated
sheath
35-109
35-106
GRASPING FORCEPS, 5 mm OD, 35 cm
shaft, dual action jaws, ratchet handle
BOWEL GRASPING FORCEPS, 20 mm long
w/rotation lock, w/flush port, insulated
fenestrated & dual action jaws, 5 mm
sheath
OD, 35 cm shaft, ratchet handle
w/rotation lock, w/flush port, insulated
sheath
Insulated Sheath & Standard Non-Ratchet Handle with Monopolar HF Port
35-110*
REF
Description
35-110
*GRASPING FORCEPS, 5 mm OD, 35 cm
shaft, dual action jaws, non-ratchet handle
w/rotation lock, monopolar HF port,
w/flush port, insulated sheath & handle
For additional information or special instrument needs,
please contact your Miltex Sales Representative or
authorized dealer for assistance.
www.miltex.com
5
DISSECTING FORCEPS
Laparoscopic Dissecting Forceps
.
.
.
.
.
.
.
.
Lightweight 1-piece design eliminates timely disassembly/reassembly and potential for mis-matched or lost components
Ergonomic standard free-moving handle with 360º finger rotation knob which allows for single-handed operation and
smooth, consistent rotation which helps reduce hand fatigue
Rotation lock/brake feature engages when the handle is in fully closed position to maintain firm control of grasped tissue
5 mm OD and 35 cm shaft for extra length and greater instrument versatility for larger patients
Luer lock flush port for optimized cleaning of the inner lumen. Extra screw-on and lanyard caps provided as standard
Monopolar HF hook-up port for optional electrosurgical use combined with insulated sheath and handle for added safety
for the medical professional
Ideal for precise dissection and separation of varying types of tissue
6 popular patterns available, all having dual action jaws for increased tissue access
Insulated Sheath & Standard Non-Ratchet Handle with Monopolar HF Port
35-200 through 35-205
REF
Description
REF
Description
35-200
TAPERED MARYLAND DISSECTOR,
35-203
BULLET-NOSE DISSECTING FORCEPS,
35-201
35-202
6
www.miltex.com
curved dual action jaws, 5 mm OD, 35 cm
5 mm OD, 35 cm shaft, dual action jaws,
shaft, non-ratchet handle w/rotation
non-ratchet handle w/rotation lock,
lock, monopolar HF port, w/flush port,
monopolar HF port, w/flush port,
insulated sheath & handle
insulated sheath & handle
MARYLAND DISSECTOR, curved dual
35-204
TAPERED DISSECTING FORCEPS, 5 mm
action jaws, 5 mm OD, 35 cm shaft,
OD, 35 cm shaft, dual action jaws,
non-ratchet handle w/rotation lock,
non-ratchet handle w/rotation lock,
monopolar HF port, w/flush port,
monopolar HF port, w/flush port,
insulated sheath & handle
insulated sheath & handle
MICRO DISSECTING FORCEPS, 5 mm OD,
35-205
MIXTER SPREADER-DISSECTOR, 5 mm
35 cm shaft, delicate & fenestrated dual
OD, 35 cm shaft, dual action jaws,
action jaws, non-ratchet handle w/rotation
non-ratchet handle w/rotation lock,
lock, monopolar HF port, w/flush port,
monopolar HF port, w/flush port,
insulated sheath & handle
insulated sheath & handle
SCISSORS
Laparoscopic Scissors
.
.
.
.
.
.
.
.
.
.
Lightweight 1-piece design eliminates timely disassembly/reassembly and potential for mis-matched or lost components
Ergonomic standard free-moving handle with 360º finger rotation knob which allows for single-handed operation and
smooth, consistent rotation which helps to reduce hand fatigue
SuperCut patterns have a razor-sharp upper blade and finely-serrated lower blade to provide clean and precise cut
without tissue slippage
Rotation lock/brake feature engages when the handle is in fully closed position to maintain firm control of grasped tissue
5 mm OD and 35 cm shaft for extra length and greater instrument versatility for larger patients
Luer lock flush port for optimized cleaning of the inner lumen. Extra screw-on and lanyard caps provided as standard
Monopolar hook-up port for optional electrosurgical use combined with insulated sheath and handle for added safety for
the medical professional
REF 35-303 SuperCut scissors is a standard non-insulated stainless steel pattern without rotation and monopolar features*
Ideal for reliable cutting of varying types of tissue
4 popular patterns available for a range of procedures
Insulated Sheath & Standard Non-Ratchet Handle with Monopolar HF Port
35-300 through 35-302
Non-Insulated Sheath & Handle
35-303*
REF
Description
REF
Description
35-300
SUPERCUT METZENBAUM SCISSORS,
curved dual action jaws, 5 mm OD, 35 cm
shaft, non-ratchet handle w/rotation
lock, monopolar HF port, w/flush port,
insulated sheath & handle
35-302
SUPERCUT SCISSORS, straight single
action jaws, 5 mm OD, 35 cm shaft, nonratchet handle w/rotation lock,
monopolar HF port, w/flush port,
insulated sheath & handle
35-301
HOOK SCISSORS, single action jaws, 5 mm
OD, 35 cm shaft, non-ratchet handle
w/rotation lock, monopolar HF port,
w/flush port, insulated sheath & handle
35-303
*SUPERCUT SCISSORS, stainless steel,
non-insulated, straight single action jaw,
5 mm OD, 35 cm shaft, non-ratchet
handle, w/flush port
www.miltex.com
7
BIOPSY PUNCHES & FORCEPS
Laparoscopic Biopsy Punches & Forceps
.
.
.
.
.
.
.
.
Lightweight 1-piece design eliminates timely disassembly/reassembly and potential for mis-matched or lost components
Ergonomic standard free-moving handle with 360º finger rotation knob which allows for single-handed operation and
smooth, consistent rotation which helps to reduce hand fatigue
Rotation lock/brake feature engages when the handle is in fully closed position to maintain firm control of grasped tissue
5 mm OD and 35 cm shaft for extra length and greater instrument versatility for larger patients
Luer lock flush port for optimized cleaning of the inner lumen. Extra screw-on and lanyard caps provided as standard
Monopolar HF hook-up port for optional electrosurgical use combined with insulated sheath and handle for added safety
for the medical professional
Ideal for assisting with reliable biopsy specimen collection
3 popular patterns available
Insulated Sheath & Standard Non-Ratchet Handle with Monopolar HF Port
35-400 through 35-402
8
REF
Description
REF
Description
35-400
BIOPSY FORCEPS, w/tooth on each jaw,
single action, 5 mm OD, 35 cm shaft,
non-ratchet handle w/rotation lock,
monopolar HF port, w/flush port,
insulated sheath & handle
35-402
BIOPSY FORCEPS, oval fenestrated
jaws, single action, 5 mm OD, 35 cm
shaft, non-ratchet handle w/rotation
lock, monopolar HF port, w/flush port,
insulated sheath & handle
35-401
BIOPSY PUNCH, w/lower serrated jaw,
single action, 5 mm OD, 35 cm shaft,
non-ratchet handle w/rotation lock,
monopolar HF port, w/flush port,
insulated sheath & handle
www.miltex.com
NEEDLE HOLDERS
Laparoscopic Needle Holders - Tungsten Carbide
.
.
.
.
.
.
.
Lightweight ergonomic 1-piece design eliminates timely disassembly/reassembly and potential for mis-matched or lost
components
Tungsten Carbide jaws provide firm grip on needles minimizing slippage and are less susceptible to wear
In-line ring handle design places surgeon’s hand in line with the needle to help facilitate natural suturing motion
German stainless steel with gold-plated finger rings for easy identification
Luer lock flush port for optimized cleaning of the inner lumen. Extra screw-on and lanyard caps provided as standard
5 mm OD and 35 cm shaft for extra length and greater instrument versatility for larger patients
3 popular patterns available (left, right, straight)
Non-Insulated Sheath & Handle
35-500 through 35-502
REF
Description
REF
35-500
IN-LINE TUNGSTEN CARBIDE NEEDLE
35-502
35-501
Description
IN-LINE TUNGSTEN CARBIDE NEEDLE
HOLDER, left curved single action jaw,
HOLDER, straight single action jaw,
5 mm OD, 35 cm shaft, w/flush port,
5 mm OD, 35 cm shaft, w/flush port,
stainless steel non-insulated
stainless steel non-insulated
IN-LINE TUNGSTEN CARBIDE NEEDLE
HOLDER, right curved single action jaw,
5 mm OD, 35 cm shaft, w/flush port,
stainless steel non-insulated
For additional information or special instrument needs,
please contact your Miltex Sales Representative or
authorized dealer for assistance.
www.miltex.com
9
S P E C I A LT Y F O R C E P S
Laparoscopic Specialty Forceps
.
.
.
.
.
.
.
.
Lightweight ergonomic 1-piece design eliminates timely disassembly/reassembly and potential for mis-matched or lost
components
German stainless steel with spring-loaded handle. The spring-loaded handle can be disengaged for free movement of handle
Claw forceps available in 5 mm & 10 mm OD and are ideal for cholecystectomy and appendectomy procedures
Spoon forceps available in 10 mm OD with wide and large cup-shaped jaws which are ideal for retrieval of stones,
fragments and tissue
Luer lock flush port for optimized cleaning of the inner lumen. Extra screw-on and lanyard caps provided as standard
35 cm shaft for extra length and greater instrument versatility for larger patients
Ideal for strong grasp of varying types of tissue and reliable extraction.
3 popular patterns available
Non-Insulated Sheath & Handle
35-504
Non-Insulated Sheath & Handle
35-503
10
REF
Description
REF
Description
35-503
CLAW FORCEPS, spring-loaded handle,
stainless steel, non-insulated, single
action jaw, 5 mm OD, 35 cm shaft,
w/flush port
35-505
SPOON FORCEPS, spring-loaded handle,
stainless steel, non-insulated, single
action jaw, 10 mm OD, 35 cm shaft,
w/flush port
35-504
CLAW FORCEPS, spring-loaded handle,
stainless steel, non-insulated, single
action jaw, 10 mm OD, 35 cm shaft,
w/flush port
www.miltex.com
For additional information or special instrument needs,
please contact your Miltex Sales Representative or
authorized dealer for assistance.
L A PA R O S C O P E S
Laparoscopes (Autoclavable)
.
.
.
.
.
.
.
.
Rod-lens system and technology which provides brilliant high-definition image and outstanding optical quality
5 mm & 10 mm OD patterns available with various direction of view angle options
Stainless steel with all possible leakage paths laser welded and/or solder-sealed
Distal and proximal ends made from scratch resistant sapphire glass
Triple tube (lumen) design provides added resistance to bending and lens cracking
Each laparoscope comes equipped with special lens polishing paste and three standard light-source adapters:
ACMI/British Standard, Richard Wolf & Storz/Olympus
High quality German-crafted instruments are fully Autoclavable at 132º C
4 popular patterns for a range of procedures
30º Direction of View Angle
35-601
REF
Description
REF
Description
35-600
LAPAROSCOPE, 5 mm OD, 0º direction
35-603
LAPAROSCOPE, 10 mm OD, 0º direction
35-601
of view, fully autoclavable, 30 cm
of view, fully autoclavable, 33 cm
working length
working length
LAPAROSCOPE, 5 mm OD, 30º direction
35-604
LAPAROSCOPE, 10 mm OD, 30º direction
of view, fully autoclavable, 30 cm
of view, fully autoclavable, 33 cm
working length
working length
www.miltex.com
11
I N S T R U M E N T R AC K
ENDOSCOPIC INSTRUMENT RACK
For The Milt ex ® St er iliz a t ion Cont a iner Sys t em
REF
3-5770-00
Description
Endoscopic Instrument Rack
19-3/4” L (50.2 cm) x 8-3/4” W (22.2 cm) x 4” H (10.2 cm)
FEATURES AND BENEFITS
• Compatible with 6” Full-Size Sterilization Container.
• Rack fits inside Full-Size perforated or wire basket and allows ample
storage underneath for other instruments and auxiliary items.
• Holds up to 10 instruments and suitable for Arthroscopic, Laparoscopic and Endoscopic
instruments ranging from 3mm to 8mm OD.
• Latex-Free and constructed with medical grade silicone grips and stainless steel frame.
• Cushioned grips protect delicate insulation of endoscopic instruments and
provides protection during transport.
• Offset side hand grips facilitate easy and aseptic removal of rack and instruments.
Contact us for more information on the complete Miltex® Sterilization Container System offering.
12
www.miltex.com
L I M I T E D WA R R A N T Y
All Miltex® Laparoscopic Surgical Instruments are guaranteed
with a One-Year Limited Warranty against defects in
workmanship and materials. This warranty excludes wear to
scissors blades and jaws.
All Miltex® Laparoscopes are guaranteed with a Two-Year
Limited Warranty against defects in workmanship and materials.
Any Miltex® Instrument which proves defective in workmanship
or material will either be repaired or replaced at our discretion,
without charge.
Our liability under this guarantee shall be
limited to repair or replacement of defective merchandise.
Carefully read and follow the care and handling instructions
which are supplied with each instrument. This will ensure proper
function and increase the life of each quality instrument.
www.miltex.com
toll-free phone 866-854-8300
toll-free fax 866-854-8400
phone 717-840-9335
fax 717-840-9347
Please call Customer
Service today for additional
information, an in-office
demonstration, to place an
order, or to receive other
Miltex catalogs.
c Miltex, Inc.
All Rights Reserved
0107/5/B/3
SURG-LAP-BROC