K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
A comprehensive range of ball valves to suit a wide variety of industrial applications
FEATURES
• The range includes one, two and three piece
ball valve designs with screwed, weld or
flanged end connections.
• 3/4/5-way multi-port designs available.
• ISO 5211 top mounting plate available, for
easy actuation, on selected models.
• Body construction either investment or sand
cast according to model.
• Carbon steel or stainless steel body
materials.
• Wide range of pressure ratings available.
• Reduced and full bore models.
• Locking device on all models.
• Seat material options available.
• Fire tested valves available.
APPLICATION
TECHNICAL DATA
The range includes valves ideal for general
industrial and service applications including
water, oil, gas and chemical processes.
Certain models also offer designs suitable
for more hazardous services such as fuel and
inflammable substances.
Sizes:
Pressure ratings:
End connections
Screwed:
Welded:
Flanged:
valves.emerson.com
© 2017 Emerson. All Rights Reserved.
DN 8 - 300
NPS ¼ - 12
PN 10/16/25/40/63
ASME 150/300
JISK 10K/20K
BSPP, BSPT, NPT
Socket and butt weld
ASME 150/300
PN 10/16/25/40
JISK 10K/20K
VCTDS-02776-EN 17/05
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F110 - ONE-PIECE BODY BALL VALVE
See page 4
• An economical, investment cast, one-piece body ball valve in stainless steel
Size range
DN 8 (NPS ¼) to DN 50 (NPS 2)
- Reduced bore
F120 - TWO-PIECE BODY BALL VALVE
See page 5
• General purpose, 69 bar (1000 psi) (PN 63) ball valve, in stainless steel
Size range
DN 8 (NPS ¼) to DN 50 (NPS 2)
- Full bore
F130M - THREE-WAY SPLIT BODY BALL VALVE
See page 6 and 7
• With ISO 5211 top mounting plate and fully enclosed bolting
• Flanged ASME 150 or DIN PN 10/16 or JIS 10K
• L-, T- or LL-port options, 90° operation
• Carbon steel or stainless steel bodies
Size range
DN 50 (NPS 2) to DN 150 (NPS 6)
- Full bore
DN 200 (NPS 8)
- Reduced bore
F133M - THREE AND FOUR-WAY SPLIT BODY BALL VALVE
See page 8-10
• With ISO 5211 top mounting plate and fully enclosed bolting
• End connections screwed, socket weld, butt weld or flanged
• Flanged ASME 150 or DIN PN 10/16 or JIS 10K
• L-, T- or LL-port options, 90° operation
• Carbon steel or stainless steel bodies
Size range
DN 10 (NPS ⅜) to DN 50 (NPS 2)
- Full and reduced bore
F138 - THREE WAY MULTI-PORT BALL VALVE
See page 11
• With ISO 5211 top mounting plate
• Investment stainless steel cast body
• Screwed ends, NPT, BSPP, BSPT reduced bore
• L- or T-port options, 90° operation
Size range
DN 8 (NPS ¼) to DN 50 (NPS 2)
- Reduced bore
2
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F155 - THREE-PIECE ECONOMICAL BALL VALVE
See page 12 and 13
• Three piece, swing-out design
• End connections screwed, butt weld or socket weld
• Carbon steel or stainless steel bodies
Size range
DN 8 (NPS ¼) to DN 100 (NPS 4)
- Full bore
F171 - THREE-PIECE BALL VALVE TO ISO 5211
See page 14 and 15
• With ISO 5211 top mounting plate
• End connections flanged, screwed, butt weld or socket weld
• Carbon steel or stainless steel bodies
Size range
DN 8 (NPS ¼) to DN 100 (NPS 4)
- Full bore
F171T - THREE-PIECE HIGH PURITY CLEAN BALL VALVE
See page 16 and 17
• With ISO 5211 mounting plate
• End connections butt weld, tubing and Tri-Clamp
• High purity cleaning (oil free)
• Helium leak detection calibrated to 1 x 10-5 std cm3/sec
Size range
DN 15 (NPS ½) to DN 300 (NPS 12)
- Full bore/true bore
F180/F180F - THREE-PIECE HEAVY DUTY BALL VALVE
See page 18-21
• With ISO 5211 top mounting plate and fully enclosed bolting
• End connections screwed, butt weld or socket weld
• Carbon steel or stainless steel bodies
• F180F Fire safe tested to API 607 5th edition / ISO 10497:2004
Size range
F180 - DN 8 (NPS ¼) to DN 100 (NPS 4)
F180F - DN 8 (NPS ¼) to DN 80 (NPS 3)
- Full bore and reduced bore
F190/F190F - SPLIT BODY FLANGED BALL VALVE
See page 22-25
• With ISO 5211 top mounting pad
• Flanged ASME 150, 300 or DIN PN 10/16, 25/40 or JIS 10K, 20K
• Investment casting for DN 100 (NPS 4) and under, carbon steel or stainless steel bodies
• F190F Fire safe tested to API 607 5th edition / ISO 10497:2004
Size range
DN 15 (NPS ½) to DN 300 (NPS 12)
- Full bore
3
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F110 - ONE-PIECE BODY BALL VALVE
MATERIALS OF CONSTRUCTION
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Part name
Body
Insert
Ball
Seat
Anti-static shaft
Handle
Shaft packing
Thrust washer
Gland ring
Handle sleeve
Handle washer
Shaft nut
Locking device
DIMENSIONS (mm)
Material
CF8M / 1.4408
ASTM A351 Gr CF8M
ASTM A351 Gr CF8M
PTFE
A276 Type 316
304SS
PTFE
PTFE
304SS
Vinyl
304SS
304SS
304SS
Quantity
1
1
1
2
1
1
1
1
1
1
1
1
1
FEATURES
• General purpose 69 bar (1000 psi) (PN 63)
ball valve
• Investment cast, one-piece body
• Stainless steel construction only
• Screwed ends to:
- BSPP
- BSPT
- NPT
• Blow-out proof shaft
• Locking device
• Size range DN 8 (NPS ¼) to DN 50 (NPS 2)
- Reduced bore
NOTE
For Pressure/Temperature charts, please refer to
page 31
NPS
DN
Ød
M
H
L
B1
B2
S
¼
8
5.0
63.5
35.6
39.0
9.8
8.0
17
Wt (kg)
0.072
⅜
½
¾
1
1¼
10
15
20
25
32
7.0
9.0
12.5
16.0
20.0
75.0
91.0
94.0
106.0
109.0
40.0
50.5
50.5
56.0
61.5
44.0
56.5
58.5
71.0
78.0
9.5
14.0
13.5
16.5
18.1
8.0
12.5
12.5
14.5
16.0
21
25
32
38
49
0.114
0.193
0.274
0.430
0.717
1½
40
25.0
130.0
68.0
83.0
18.0
16.0
53
0.870
2
50
32.0
130.0
71.0
100.0
21.2
19.0
32
1.364
4
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F120 - TWO-PIECE BODY BALL VALVE
14
12
11
8
10
7
9
Ød
6
B
5
4
2
3
1
MATERIALS OF CONSTRUCTION
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Part name
Body
Ball
Seat
Body seal
Cap
Anti-static shaft
Thrust washer
Shaft packing
Gland nut
Shaft washer
Shaft nut
Handle
Handle sleeve
Locking device
DIMENSIONS (mm)
NPS
¼
⅜
½
¾
1
1¼
1½
2
13
DN
8
10
15
20
25
32
40
50
Material
CF8M / 1.4408
ASTM A351 Gr. CF8M
PTFE
PTFE
CF8M / 1.4408
A276 Type 316
PTFE
PTFE
304SS
304SS
304SS
304SS
Vinyl
304SS
Quantity
1
1
2
1
1
1
1
1
1
1
1
1
1
1
FEATURES
• General purpose 69 bar (1000 psi) (PN 63),
ball valve
• Two piece, investment cast body
• Stainless steel construction only
• Screwed end to:
- BSPP
- BSPT
- NPT
• DIN 3202 M3 face-to-face
• Adjustable shaft packing
• Locking device
• Size range DN 8 (NPS ¼) to DN 50 (NPS 2)
- Full bore
NOTE
For Pressure/Temperature charts, please refer to
page 31
Ød
11.2
11.2
15.0
20.0
25.0
32.0
38.0
50.0
M
100
100
136
146
168
168
194
194
H
52
52
58
63
75
80
94
103
L
50
60
75
80
90
110
120
140
B
10
12
13
16
17
20
22
25
Wt (kg)
0.24
0.28
0.44
0.56
0.88
1.44
1.93
3.36
5
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F130M - THREE-WAY SPLIT BODY BALL VALVE
17
24
16
23
15
20
14
22
13
21
12
19
11
18
10
9
DN 50 - 100
(NPS 2 - 4)
2
1
4
MATERIALS OF CONSTRUCTION
No.
1
2
3
4
5
6
7
8
9
10
11
Part name
Body
Cap
Ball
Ball seat
Body gasket
Bolt nut
Bolt
Bushing
Anti-static shaft
Lower thrust washer
Compress ring
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Upper thrust washer
Cover
V-ring shaft packing
Thrust washer
Gland
Stop bolt
Cover seal
Belleville washer
Triangle stopper
Lock saddle
Shaft nut
Shaft adapter
Handle
Block cover
3
8
5
6
DN 150
(NPS 6)
7
Material
CF8M / WCB, 1.4408 / 1.0619
CF8M / WCB, 1.4408 / 1.0619
ASTM A351 Gr. CF8M
RPTFE
PTFE
A2-70
B8/A2-70/8.8
50% SS powder / 50% PTFE
A276 Type 316 (Note 3)
50% SS powder / 50% PTFE
316L SS DN 50 - 100 (NPS 2 - 4)
316SS DN 150 - 200 (NPS 6 - 8)
TFM 1600
CF8M / WCB, 1.4408 / 1.0619
PTFE
50% SS powder / 50% PTFE
304SS
Stainless steel
PTFE
301SS
Stainless steel
Stainless steel
304SS
304SS
SGP Zn plating
ASTM A351 Gr. CF8M / ASTM A216 Gr. WCB
Quantity
1
3-4
1
4
4
(Note 1)
(Note 1)
1
1
1
1
1
1
1 set
1
1
1-2
1
2
1
1
1-2
1
1
1 (Note 2)
Note 1:DN 50 - 80 (NPS 2 - 3), all standards: 20 pcs; DN 100 (NPS 4), all standards: 28 pcs, (B8);
DN 150 (NPS 6) Class 150, PN 10/16,10K, all standards: 44 pcs, (SS: A2-70/CS: 8.8)
Note 2: For no. 25 block cover, please refer to page 7
Note 3:2205 (A276-S31803) is standard for DN 150 (NPS 6) Class 150, 10K, PN 10/16 CF8M/SCS14A/1.4408
ball valves
17-4 (A564-630) is standard for DN 150 (NPS 6) Class 150, 10K, PN 10/16 WCB/SCPH2/1.0619 ball valves
FEATURES
• Four seats design
• Simplicity in replacing valve seats and
packing
• Investment cast body DN 50 (NPS 2) to
DN 100 (NPS 4)
• Sand casting DN 150 (NPS 6) and
DN 200 (NPS 8) reduced bore
• Standard L-port and T-port; optional LL-port
for 4 way (*)
• Tightness to EN 12266-1, Rate A
• Patented ‘SEALMASTER’ shaft arrangement
• Double shaft sealing complies with TA Luft
requirements
• Semi-trunnion mounted
• Lower operation torque
• ISO 5211 mounting plate
• Full bore and flanged connection
• Anti-static design according to EN 1983 /
ISO 17292
• Optional ball and body patterns for various
flow paths
• Valve pressure rating:
- ASME Class 150
- DIN PN 10/16
- JIS 10K
NOTE
For Pressure/Temperature charts, please refer to
page 31
BALL PORT CONFIGURATION
Top view
Side view
Side entry:
1. Tee-port (T)
2. Angle port (L)
3. Double angle port (LL)*
4. Straight port (S)
* Please consult factory for minimum
order quantity
6
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F130M - THREE-WAY SPLIT BODY BALL VALVE
DIMENSIONS (mm)
NPS
2
2½
3
4
6
8*
NPS
2
2½
3
4
6
8*
DN
50
65
80
100
150
100
A
27.5
43.0
41.5
47.2
65.0
65.0
DN
50
65
80
100
150
200
Ød
50
65
76
100
150
150
DN
50
65
80
100
150
200
ASME
150
1.6
1.6
1.6
1.6
1.6
1.6
B
17.5
24.0
24.0
29.0
37.0
37.0
ASME
150
120.5
139.5
152.5
190.5
241.3
298.4
Ø
70
102
102
102
125
125
ØB
JIS
10K
120
140
150
175
240
-
f
NPS
2
2½
3
4
6
8*
JIS
10K
2
2
2
2
2
2
ASME
150
4
4
4
8
8
8
PN
10/16
125
145
160
180
240
295
N
JIS
10K
4
4
8
8
8
12
F
16.0
22.3
22.3
28.6
34.0
34.0
ASME
150
92.0
105.0
127.0
157.0
216.0
269.9
PN
10/16
4
4
8
8
8
12
G
9.5
17.0
17.0
17.0
23.0
23.0
ØC
JIS
10K
96
116
126
151
212
-
ASME
150
19.0
19.0
19.0
19.0
22.2
22.2
W
M8
M10
M10
M10
M12
M12
PN
10/16
102
122
138
158
212
268
ØN
JIS
10K
19
19
19
19
23
23
ASME
150
152.0
178.0
190.0
229.0
279.4
343.3
PN
10/16
18
18
18
18
22
22
ASME
150
220
280
285
347
480
480
ØD
JIS
10K
155
175
185
210
280
-
PN
10/16
165
185
200
220
285
340
L
JIS
10K
220
280
285
347
480
480
PN
10/16
230
290
310
350
480
480
ASME
150
15.9
17.5
19.1
23.9
25.4
28.6
H
80.0
97.0
108.0
129.0
214.5
215.0
T
JIS
10K
16
18
18
18
22
-
H1
136.5
162.0
186.0
213.0
280.0
280.0
PN
10/16
18
18
20
20
22
24
M
395
495
495
650
800
800
* Reduced bore only.
7
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F133M - THREE- AND FOUR-WAY SPLIT BODY BALL VALVE
FEATURES
Handle for valve
Size DN 40 (NPS 1½)
MATERIALS OF CONSTRUCTION
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Part name
Body
Cap
Ball
Ball seat
Body gasket
Bolt washer
Bolt
Lower thrust washer
Compress ring
Upper thrust washer
V-ring shaft packing
Thrust washer
Anti-static shaft
Gland
Belleville washer
Shaft nut
Handle
18
19
20
21
22
23
24
25
Handle sleeve
Rivet
Shaft adapter
Triangle stopper
Lock saddle
Locking trigger
Stop bolt
Block cover
Material
CF8M / WCB, 1.4408 / 1.0619
CF8M / WCB, 1.4408 / 1.0619
ASTM A351 Gr. CF8M
RPTFE
PTFE
304SS
A2-70
50% SS powder / 50% PTFE
316L SS
TFM 1600
PTFE
50% SS powder / 50% PTFE
A276 Type 316
304SS
301SS
304SS
CF8 DN 15 - 32 (NPS ½ - 1¼)
SGP Zn plating DN 40 (NPS 1½)
Vinyl
304SS
304SS
Stainless steel
Stainless steel
Stainless steel
Stainless steel
CF8M / WCB, 1.4408 / 1.0619
Quantity
1
3-4
1
4
4
16
16
1
1
1
1 set
1
1
1
2
1-2
1
• Four seats design
• Simplicity in replacing valve seats and
packing
• Investment casting for body and end cap
• Optional LL-port for 4 way (*)
• Patented ‘SEALMASTER’ shaft arrangement
• Double shaft sealing complies with TA Luft
requirements
• Blow-out proof shaft
• ISO 5211 mounting plate
• Anti-static design according to EN 1983 /
ISO 17292
• Optional ball and body patterns for various
flow paths
• Weld in place for socket or butt weld end
• Size range DN 10 (NPS ⅜) to DN 50 (NPS 2)
- Full and reduced bore
• Valve pressure rating:
- ASME Class 150
- DIN PN 10/16
- JIS 10K
• End connections screwed, butt weld, socket
weld and flanged
• Flanged connection in full bore only
• Tightness to EN 12266-1, Rate A
• Patented ‘POSILOCK’ handle for DN 15
(NPS ½) to DN 32 (NPS 1¼)
- Full bore
1
1
1
1
1
1
1
1
DN 10 (NPS ⅜) to DN 32 (NPS 1¼) for standard handle
DN 40 (NPS 1½) T-handle
Side entry
3-way
A
Side entry
4-way
B
BALL PORT CONFIGURATION
Top view
Side view
Side entry
1. Tee-port (T)
2. Angle port (L)
3. Double angle port (LL)*
4. Straight port (S)
* Please consult factory for minimum
order quantity
Top view
Side view
8
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F133M - THREE- AND FOUR-WAY SPLIT BODY BALL VALVE
Full bore DN 40 (NPS 1½)
Reduced bore DN 50 (NPS 2)
NOTE
For Pressure/Temperature charts, please refer to page 31
DIMENSIONS (mm)
F
⅜
½
¾
1
1¼
1½
NPS
R
½
¾
1
1¼
1½
2
F
10
15
20
25
32
40
DN
R
15
20
25
32
40
50
Ød
12.5
15.5
20.0
25.0
32.0
38.0
H
63.5
82.0
86.0
98.0
100.0
127.0
L
90.0
107.0
110.5
126.5
135.0
154.0
M
115
130
130
165
200
395
A
12.5
18.2
21.8
21.8
24.5
24.5
B
5.5
10.6
14.0
14.3
15.0
15.0
G
6.3
6.3
8.0
8.0
9.5
9.5
ØP
42
42
50
50
70
70
ØF
9.7
9.7
11.2
11.2
16.0
16.0
W
M5
M5
M6
M6
M8
M8
F: Full bore
R: Reduced bore
9
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F133M - THREE- AND FOUR-WAY SPLIT BODY BALL VALVE
L/2
L/2
Size DN 40 (NPS 1½)
NOTE
For Pressure/Temperature charts, please refer to page 31
DIMENSIONS (mm)
NPS
½
¾
1
1½
DN
15
20
25
40
A
19.0
21.8
21.8
24.5
B
11.4
14.0
14.3
15.0
ASME
150
35
43
51
73
ØB
JIS 10K
JIS 20K
51
56
67
81
PN
10
45
58
68
88
ASME
150
89
98
108
127
ØC
JIS 10K
JIS 20K
95
100
125
140
PN
10
95
105
115
150
L
NPS
½
¾
1
1½
DN
15
20
25
40
F
9.7
11.2
11.2
16.0
G
6.3
8.0
8.0
9.5
H1
82
86
98
127
ASME 150
JIS 10K
148.2
153.9
168.4
212.4
JIS 20K
154.4
163.6
181.0
223.4
Ød
15.5
20.0
25.0
38.0
ØP
42
50
50
70
ASME
150
60.5
70.0
79.5
98.5
JIS
20K
14
16
16
18
PN
10
16
18
18
18
ASME
150
1.6
1.6
1.6
1.6
T
PN
10
157.8
167.8
182.0
218.0
ASME
150
11.2
11.2
11.2
14.2
JIS
10K
12
14
14
16
ØD
JIS 10K
JIS 20K
70
75
90
105
PN
10
65
75
85
110
N
4
4
4
4
M
130
130
165
400
W
M5
M6
M6
M8
f
JIS 10K
JIS 20K
1
1
1
2
PN
10
2
2
2
2
ASME
150
16
16
16
16
Øn
JIS 10K
JIS 20K
15
15
19
19
PN
10
14
14
14
18
10
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F138 - THREE-WAY MULTI-PORT BALL VALVE
18
12
11
10
13
9
19
8
17
7
15
6
Port
5
4
3
2
1
MATERIALS OF CONSTRUCTION
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Part name
Body
Cap
Seat
Ball
Anti-static shaft
Joint gasket
Thrust washer
Gland
Handle
Handle washer
Washer
Handle nut
Handle sleeve
End cap
Shaft packings
End cap seal
Stopper
Bolt
Locking device
Material
CF8M / 1.4408
CF8M / 1.4408
RPTFE
ASTM A351 Gr. CF8M
A276 Type 316
PTFE
PTFE
304SS
304SS
304SS
304SS
304SS
Vinyl
CF8M / 1.4408
PTFE
PTFE
304SS
A2-70
304SS
Quantity
1
2
4
1
1
2
1
1
1
1-3
1
1
1
1
1 set
1
1
1
1
FEATURES
• General purpose 69 bar (1000 psi) (PN 63),
ball valve
• Three way multi-port ball valve with L-port or
T-port options, 90° operation
• Investment cast body
• Stainless steel body, RPTFE seats
• Screwed ends to:
- BSPP
- BSPT
- NPT
• ISO 5211 top mounting plate
• Blow-out proof shaft
• Size range DN 8 (NPS ¼) to DN 80 (NPS 3)
- Reduced bore
NOTE
For Pressure/Temperature charts, please refer to
page 32
16
14
DETAIL K
BALL PORT CONFIGURATION
DIMENSIONS (mm)
NPS
¼
⅜
½
¾
1
1¼
1½
2
2½
3
DN
8
10
15
20
25
32
40
50
65
80
Port
11.0
11.0
12.5
16.0
20.0
25.0
32.0
38.0
50.0
65.0
E
29.7
29.7
29.7
35.4
35.4
35.4
49.5
49.5
49.5
72.1
F
34.6
34.6
39.3
44.7
51.4
57.5
62.7
74.6
85.0
97.5
ØP
42
42
42
50
50
50
70
70
70
102
N
M5
M5
M5
M6
M6
M6
M8
M8
M8
M10
Ød±0.5
11.0
11.0
12.7
16.0
20.0
25.0
32.0
38.0
50.0
65.0
L±0.8
69.4
69.4
75.5
86.0
102.4
118.0
125.8
149.0
170.1
195.1
H±3.0
60.7
60.7
64.1
82.4
86.1
91.4
102.7
110.0
115.8
132.0
M±3.0
133.4
133.0
133.0
178.5
178.5
209.9
208.9
229.9
229.9
265.0
Wt (kg)
0.60
0.60
0.67
1.20
1.70
2.40
3.35
5.50
6.63
10.50
Top view
Side view
Side entry
1. Tee-port (T)
2. Angle port (L)
11
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F155 - THREE-PIECE ECONOMICAL BALL VALVE
17
15
16
14
13
10
9
11
8
12
Ød1
4
5
6
2
1
3
7
MATERIALS OF CONSTRUCTION
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Part name
Body
Seat
Body gasket
Ball
Bolt nut
Bolt washer
Bolt
Cap
Anti-static shaft
Handle washer
Shaft packing
Thrust washer
Gland nut
Shaft nut
Handle
Handle sleeve
Locking device
Material
CF8M / WCB, 1.4408 / 1.0619
PTFE
PTFE
ASTM A351 Gr. CF8M
304SS
304SS
304SS
CF8M / WCB, 1.4408 / 1.0619
A276 Type 316
304SS
PTFE
PTFE
304SS
304SS
304SS
Vinyl
304SS
Quantity
1
2
2
1
4-12
4-12
4-6
2*
1
1
1
1
1
1
1 set
1
1
FEATURES
• General purpose 69 bar (1000 psi) (PN 63) /
41.4 bar (600 psi) (PN 40), ball valve
• Three piece, swing out design
• Investment casting for body and end cap
• End connections screwed, butt weld and
socket weld
• Blow-out proof stem
• Locking device
• Size range DN 8 (NPS ¼) to DN 100 (NPS 4)
- Full bore
• Tightness to EN 12266-1, Rate A
• Threaded ends to: BSPP, BSPT, NPT
NOTE
For Pressure/Temperature charts, please refer to
page 32
* Stainless steel welded connectors are CF3M/1.4409
L
Threaded end
L
Socket weld end
ØN3
ØM3
ØN2
ØN1
37.5˚
L1
Butt weld end
12
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F155 - THREE-PIECE ECONOMICAL BALL VALVE
ØN2
PART LIST
L
DN 8 -1/4"~3"
80 / NPS ¼ - 3
SW
17
15
16
Ø
37.5
M
ØN3
13
10
11
8
12
4
H
9
ØM3
14
4"
L
DN 100 / NPS 4
Ød1
BW
5
6
2
1
3
7
L
DIMENSIONS (mm)
DN
8
10
15
20
25
32
40
50
65
80
100
NPS
¼
⅜
½
¾
1
1¼
1½
2
2½
3
4
DIMENSIONS (inch)
NPS
8
10
15
20
25
32
40
50
65
80
100
DN
¼
⅜
½
¾
1
1¼
1½
2
2½
3
4
d1
11.5
12.5
15.0
20.0
25.0
32.0
38.0
50.0
65.0
80.0
100.0
L
54.0
54.0
63.5
72.5
81.0
94.5
108.0
121.5
157.5
190.0
225.0
M
97.4
97.4
122.9
122.9
144.9
144.9
188.9
188.9
255.3
260.8
322.2
H
49.0
49.0
58.0
61.0
68.0
73.5
84.5
93.2
131.8
140.0
173.6
N2
14.2
17.5
21.8
27.4
34.1
42.7
49.0
61.2
77.0
90.2
115.3
N3
11.0
12.5
15.8
20.9
26.6
35.1
40.9
52.5
62.7
77.9
102.3
M3
13.7
17.1
21.3
26.7
33.4
42.2
48.3
60.3
73.0
88.9
114.3
Wt (kg)
0.31
0.31
0.47
0.60
0.91
1.36
2.03
3.00
6.36
9.90
20.74
d1
0.45
0.49
0.59
0.79
0.98
1.26
1.50
1.97
2.56
3.15
3.94
L
2.13
2.13
2.50
2.85
3.19
3.72
4.25
4.78
6.20
7.48
8.86
M
3.83
3.83
4.84
4.84
5.70
5.70
7.44
7.44
10.05
10.27
12.69
H
1.93
1.93
2.28
2.40
2.68
2.89
3.33
3.67
5.19
5.51
6.83
N2
0.56
0.69
0.86
1.08
1.34
1.68
1.93
2.41
3.03
3.55
4.54
N3
0.43
0.49
0.62
0.82
1.05
1.38
1.61
2.07
2.47
3.07
4.03
M3
0.54
0.67
0.84
1.05
1.31
1.66
1.90
2.37
2.87
3.50
4.50
Wt (lbs)
0.68
0.68
1.04
1.32
2.01
3.00
4.48
6.61
14.02
21.83
45.72
NO.
1
Part name
Body
2
3
4
Body seat
Body gasket
Ball
5
6
7
8
Bolt nut
Bolt washer
Bolt
Cap
9
10
11
12
13
14
15
16
17
Anti-static stem
Handle washer
Stem packing
Thrust washer
Gland nut
Stem nut
Handle
Handle sleeve
Locking device
Material
CF8M/WCB,
1.4408/1.0619
PTFE
PTFE
ASTM A351
Gr.CF8M
SS304
SS304
SS304
CF8M/WCB,
1.4408/1.0619
A276 type 316
SS304
PTFE
PTFE
SS304
SS304
SS304
Vinyl
SS304
13
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F171 - THREE-PIECE BALL VALVE TO ISO 5211
20 21 22
19
18
13
17
16
12
15
11
14
10
8
9
7
1
3
20
25
6
23
4
5
2
24
Handle for valve
Sizes DN 65 - 100 (NPS 2½ - 4)
Sizes up to DN 100 (NPS 4)
MATERIALS OF CONSTRUCTION
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Part name
Body
Cap
Ball
Bolt
Bolt washer
Body gasket
Ball seat
Anti-static shaft
V-ring shaft packing
Thrust washer
Gland
Belleville washer
Locking trigger
Lower shaft seal
Compress ring
Upper shaft seal
Stop bolt
Lock saddle
Shaft nut
Handle
Handle sleeve
Rivet
Bolt nut
Triangle stopper
Handle adapter
Material
CF8M / WCB, 1.4408 / 1.0619
CF8M / WCB, 1.4408 / 1.0619
ASTM A351 Gr. CF8M
A2-70
304SS
PTFE
PTFE
A276 Type 316
PTFE
50% SS powder / 50% PTFE
304SS
301SS
Stainless steel
50% SS powder / 50% PTFE
316L SS
TFM 1600
Stainless steel
Stainless steel
304SS
CF8 / SGP Zn plating
Vinyl
304SS
A2-70
Stainless steel
CF8
Quantity
1
2*
1
4-6
4-12
2
2
1
1 set
1
1
2
1
1
1
1
1
1
1-2
1
1
1
4-12
1
1
FEATURES
• Patented ‘SEALMASTER’ shaft arrangement
for DN 15 (NPS ½) (full bore) and larger sizes
• Double shaft seal design complies with
TA Luft fugitive emission requirements
• Three-piece swing out design
• Valve pressure rating:
DN 8 - 40 (NPS ¼ - 1½) - ASME Class 400
DN 50 - 100 (NPS 2 - 4) - ASME Class 300
• ISO 5211 top mounting plate
• End connections flanged, screwed, butt weld
or socket weld
• Carbon steel or stainless steel bodies
• Size range DN 8 (NPS ¼) to DN 100 (NPS 4)
- Full bore
• Seat material options
• Blow-out proof shaft and anti-static design
• Tightness to EN 12266-1, Rate A
•Patented ‘POSILOCK’ handle for
DN 15 (NPS ½) to DN 50 (NPS 2)
- Full bore
NOTE
For Pressure/Temperature charts, please refer to
page 33
* Stainless steel welded connectors are CF3M/1.4409
14
d
C
B
D
N n
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F171 - THREE-PIECE BALL VALVE TO ISO 5211
f
T
Threaded end
Socket weld
Butt weld
Flange end (PN 25/40 F1)
DIMENSIONS (mm)
NPS
¼
⅜
½
¾
1
1¼
1½
2
2½
3
4
NPS
¼
⅜
½
¾
1
1¼
1½
2
2½
3
4
DN
8
10
15
20
25
32
40
50
65
80
100
DN
8
10
15
20
25
32
40
50
65
80
100
A
12.0
12.0
19.8
20.0
21.0
21.4
24.6
25.1
41.6
42.0
47.8
Ød
11.6
12.7
15.0
20.0
25.0
32.0
38.0
50.8
65.0
76.0
97.4
B
6.0
6.0
12.5
12.5
13.7
13.2
13.9
13.9
26.1
25.4
29.2
M
135
135
135
135
165
165
200
200
250
250
500
H1
65.5
66.0
83.0
86.0
96.0
102.0
115.0
124.0
160.0
170.0
182.0
G
5.0
5.0
6.3
6.3
8.0
8.0
9.5
9.5
15.0
15.0
17.0
L4
21.1
21.2
26.5
33.2
37.7
46.8
58.8
69.6
86.5
102.6
125.4
ØP
36
36
42
42
50
50
70
70
102
102
102
L1
65.00
65.00
72.10
85.00
91.96
110.00
123.00
142.00
174.00
193.00
221.40
L2
130
150
160
180
200
230
290
310
350
F
8.0
8.0
9.7
9.7
11.2
11.2
16.0
16.0
19.1
19.1
28.6
N
4
4
4
4
4
4
8
8
8
Wt (kg)
Threaded
SW, BW
0.44
0.44
0.44
0.95
1.40
1.90
3.08
4.70
8.90
14.10
22.00
W
M5
M5
M5
M5
M6
M6
M8
M8
M10
M10
M10
t1
0.80
0.80
0.80
1.00
1.60
1.60
1.60
1.60
2.00
2.00
1.60
T
16
18
18
18
18
20
22
24
24
f
2
2
2
2
3
3
3
3
3
Øn
14
14
14
18
18
18
18
18
22
ØD
95
105
115
140
150
165
185
200
235
ØB
65
75
85
100
110
125
145
160
190
ØC
45
58
68
78
88
102
122
138
162
ØN2
14.2
17.5
21.7
27.1
33.8
42.6
48.6
61.1
77.1
90.2
115.1
ØN3
11.6
12.8
15.8
20.9
26.6
35.0
40.9
52.5
62.7
78.0
104.3
Wt (kg)
PN 25/40
Flange
2.24
3.04
3.90
6.25
7.15
10.15
16.62
23.80
35.60
ØN1 refer to thread options: BSPP, BSPT, NPT, DIN 2999
15
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F171T - THREE-PIECE HIGH PURITY CLEAN BALL VALVE
21
19
17
24 17 16
22
25 18 21
13
19
11
15
20
10
14
18
9
12
12
16
11
15
10
14
9
13
8
7
6
5
4
3
1
2
23 5a
Sizes DN 15 - 80 (NPS ½ - 3)
MATERIALS OF CONSTRUCTION
No.
1
2
3
4
5
5a
6
7
8
9
10
Part name
Body
Cap
Ball
Ball seat
Body seal
Seat ring
Bolt washer
Bolt nut
Bolt
Lower thrust washer
Compress ring
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Upper thrust washer
Anti-static shaft
V-ring shaft packing
Thrust washer
Gland
Belleville washer
Stop bolt
Lock saddle
Shaft nut
Locking trigger
Handle
Handle sleeve
Cap seal
Triangle stopper
Handle adapter
WCB, SCPH2, 1.0619
Size
NPS ½ - 4
NPS 6
NPS 8 - 12
NPS ½ - 4
NPS 6
NPS 8 - 12
3
4
5
2
8
Sizes DN 100 - 300 (NPS 4 - 12)
Material
CF8M / WCB, 1.4408
CF8M / WCB, 1.4409
ASTM A351 Gr. CF8M
PTFE
PTFE
ASTM A351 Gr. CF8M - DN 125 - 300 (NPS 5 - 12)
304SS
A2-70
A2-70
50% SS powder / 50% PTFE
316L SS - DN 15 - 100 (NPS ½ - 4)
316 SS - DN 125 - 300 (NPS 5 - 12)
TFM 1600
A276 Type 316 (Note 2)
PTFE
50% SS powder / 50% PTFE
304SS
301SS
Stainless steel
Stainless steel
304SS
Stainless steel
CF8 / SGP Zn plating
Vinyl
PTFE
Stainless steel - DN 65 - 300 (NPS 2½ - 12)
CF8 - DN 65 - 125 (NPS 2½ - 5)
A536 DN 150 - 300 (NPS 6 - 12)
Note 1: DN 15 - 65 (NPS ½ - 2½) x 4 pcs, DN 80 - 100 (NPS 3 - 4) x 6 pcs, DN 125 (NPS 5) x 20 pcs,
DN 150 (NPS 6) x 28 pcs, DN 200 (NPS 8) x 24 pcs, DN 250 - 300 (NPS 10 - 12) x 40 pcs
Note 2: see table below
Body material
CF8M, SCS14A, 1.4408
1
Quantity
1
2
1
2
2
1
4-12
4-12
(Note 1)
1
1
1
1
1 set
1
1
2
1-2
1
1-2
1
1
1
1
1
1
FEATURES
• Patented ‘SEALMASTER’ shaft arrangement
• Double shaft seal design complies with
TA Luft fugitive emission requirements
• Blow-out proof shaft
• ISO 5211 top mounting plate
• Three-piece swing out design
•Valve pressure rating:
DN 15 - 40 (NPS ½ - 1½) - PN 63
DN 50 - 100 (NPS 2 - 4) - PN 40
DN 125 - 300 (NPS 5 - 12) - PN 16
• End connections butt weld, tubing and
Tri-Clamp
• All wetted parts are polished to 180 Grit
(0.51 to 0.64 micron)
• All extended weld ends in CF3M/DIN 1.4409
material allows orbital welding in place
• High purity cleaning (oil free) and packing
• Bosses for purge connections are built into
the end caps
• Size range DN 15 (NPS ½) to DN 300 (NPS 12)
• Helium leak detection calibrated to
1x10-5 std cm3/sec
• Patented ‘POSILOCK’ handle for DN 15
(NPS ½) to DN 50 (NPS 2) full bore
• Individually bagged
• Cavity filler seat option available
• Clean room asembly option available
NOTE
For Pressure/Temperature charts, please refer to
page 33
316
2205 (A276-S31803)
2205 (A276-S31803)
316
17-4 (A564-630)
17-4 (A564-630)
16
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F171T - THREE-PIECE HIGH PURITY CLEAN BALL VALVE
DN 15 - 100
(NPS ½ - 4)
Extended butt weld
DN 100 - 300 (NPS 4 - 12)
SCH#5 / SCH#10
Extended butt weld
DN 15 - 80 (NPS ½ - 3)
SCH#5 / SCH#10
DN 125 - 200
(NPS 5 - 8)
L5
L5
L5
L5
L4
L4
L4
L4
T-clamp
Orbital tubing
DIMENSIONS (mm)
NPS
½
¾
1
1½
2
2½
3
4
DN
15
20
25
40
50
65
80
100
NPS
½
¾
1
1¼
1½
2
2½
3
4
5
6
8
10
12
DN
15
20
25
32
40
50
65
80
100
125
150
200
250
300
V
3.63
3.63
2.85
2.85
2.85
2.85
2.85
2.85
L1
93.0
105.2
113.9
125.0
146.0
174.0
193.0
219.4
L2
139.7
139.7
160.7
190.4
203.2
254.0
279.0
307.0
L4
26.5
33.2
37.7
58.0
69.6
86.5
102.6
125.4
L5
35.0
36.0
38.0
46.0
46.0
56.0
60.0
60.0
ØK
25.0
25.0­
50.4
50.4
63.9
77.4
90.9
118.9
ØN
20.2
20.3
43.6
43.6
56.3
70.6
83.3
110.3
*Ød
9.40
15.75
22.10
34.80
47.50
60.20
72.90
97.38
*Ød1
10.22
15.75
22.10
34.80
47.50
60.20
72.90
97.38
*ØD
12.70
19.05
25.40
38.10
50.80
63.50
76.20
101.60
Wt (kg)
T-clamp
0.75
1.02
1.54
3.08
4.54
9.32
13.15
DN 250 - 300
(NPS 10 - 12)
T
A
19.8
20.0
21.0
21.4
24.6
25.1
41.6
42.0
47.8
53.6
65.0
65.0
83.5
83.5
B
12.5
12.5
13.7
13.2
13.9
13.9
26.1
25.4
29.2
33.0
39.0
39.0
52.0
52.0
G
6.3
6.3
8.0
8.0
9.5
9.5
15.0
15.0
17.0
17.0
23.0
23.0
30.0
30.0
ØP
42
42
50
50
70
70
102
102
102
102
125
125
140
140
W
M5
M5
M6
M6
M8
M8
M10
M10
M10
M10
M12
M12
M16
M16
F
9.7
9.7
11.2
11.2
16.0
16.0
19.1
19.1
28.6
28.6
34.0
34.0
50.0
50.0
Ød
15.0
20.0
25.0
32.0
38.0
50.8
65.0
76.0
97.4
125.0
150.0
200.0
250.0
300.0
5S
1.65
1.65
1.65
1.65
1.65
1.65
2.10
2.10
2.10
2.80
2.80
2.80
3.40
4.00
Wt (kg)
10S
2.1
2.1
2.8
2.8
2.8
2.8
3.0
3.0
3.0
3.4
3.4
4.0
4.0
4.5
ØD
21.7
27.2
34.0
42.7
48.6
60.5
76.3
89.1
114.3
139.8
165.2
216.3
267.4
318.5
M
135
135
165
165
200
200
250
250
595
595
800
1100
1100
1100
H1
82
86
98
100
116
125
160
171
204
226
281
317
378
420
L3
139.7
139.7
154.2
165.1
190.5
203.2
254.0
279.4
317.5
381.0
403.0
521.0
559.0
635.0
Ext. BW
0.98
1.18
1.80
2.64
3.90
5.42
10.42
15.74
23.06
49.00
76.00
136.00
153.00
409.00
X
40
40
Y
47
47
17
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F180 - THREE-PIECE HEAVY DUTY BALL VALVE
20 21 22
19
13
18
18
14
9
16
7
8
15
10
15
10
17
11
16
11
13
12
17
12
20 21 22
19
6
3
14
9
7
8
6
3
23 5
1
4
23 5
2
Sizes DN 8 - 40 (NPS ¼ - 1½)
Drawing shows full bore construction
MATERIALS OF CONSTRUCTION
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Part name
Body
Cap
Ball
Bolt
Bolt washer
Ball seat
Body gasket
Anti-static shaft
V-ring shaft packing
Thrust washer
Gland
Belleville washer
Locking trigger
Lower shaft seal
Compress ring
Upper shaft seal
Stop bolt
Lock saddle
Shaft nut
Handle
Handle sleeve
Rivet
Bolt nut
1
4
2
Sizes DN 50 - 80 (NPS 2 - 3­)
FEATURES
Material
CF8M / WCB, 1.4408 / 1.0619
CF8M / WCB, 1.4409 / 1.0619
ASTM A351 Gr. CF8M
A2-70
304SS
RPTFE
PTFE
A276 Type 316
PTFE
50% SS powder / 50% PTFE
304SS
301SS
Stainless steel
50% SS powder / 50% PTFE
316L SS
TFM 1600
Stainless steel
Stainless steel
304SS
CF8 / SGP Zn plating
Vinyl
304SS
A2-70
* Stainless steel welded connector materials are CF3M/1.4409
Quantity
1
2*
1
4-6
4-12
2
2
1
1 set
1
1
2
1
1
1
1
1
1
2
1
1
1
4-12
• Patented ‘SEALMASTER’ shaft arrangement
DN 15 (NPS ½) (full bore) and larger sizes
• Double shaft sealing complies with TA Luft
fugitive emission requirements
• Heavy duty, three piece ball valve
• ISO 5211 top mounting plate
• Fully enclosed bolting for sizes up to
DN 40 (NPS 1½) full bore and DN 50 (NPS 2)
reduced bore
• End connections, screwed, butt weld and
socket weld
• Seat material options
• Size range DN 8 to 80 (NPS ¼ - 3)
- Reduced bore to DN 100 (NPS 4)
• Blow-out proof shaft and anti-static design
• Tightness to EN 12266-1, Rate A
• Optional casting per AD2000-WO
• Patented ‘POSILOCK’ handle for DN 15 to 50
(NPS ½ - 2)
- Full bore
• Valve pressure rating:
DN 8 - 50 (NPS ¼ - 2) - ASME Class 600
DN 65 - 80 (NPS 2½ - 3) - ASME Class 300
NOTE
For Pressure/Temperature charts, please refer to
page 33
18
H1
H1
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F180 - THREE-PIECE HEAVY DUTY BALL VALVE
Side view
Full bore:
DN 10 (NPS ⅜)
Reduced bore:
DN 15 (NPS ½)
L4
L4
Threaded end
Side view
Full bore:
DN 50 - 80 (NPS 2 - 3)
Reduced bore:
DN 65 - 100 (NPS 2½ - 4)
Side view
Full bore:
DN 15 - 40 (NPS ½ - 1½)
Reduced bore:
DN 20 - 50 (NPS ¾ - 2)
Socket weld
Butt weld
FULL BORE DIMENSIONS (mm)
SCH#5 (FP) / SCH#10 (FP)
t2
NPS DN
Ød
A
B
G
ØP
F
W
M
t1
5S
10S
L1
L2
L3
ØN2
ØN3
ØN4
H1
Wt (kg)
¼
⅜
½
¾
1
1¼
1½
2
2½
3
11.2
12.7
15.0
20.0
25.0
31.8
38.1
50.8
65.0
76.0
12.2
12.2
15.0
20.0
21.4
21.7
25.6
25.2
42.7
39.4
5.6
5.6
9.3
12.5
13.4
13.8
15.6
16.3
25.2
24.8
5.0
5.0
6.3
6.3
8.0
8.0
9.5
9.5
17.0
17.0
36
36
42
42
50
50
70
70
102
102
8.0
8.0
9.7
9.7
11.2
11.2
16.0
16.0
22.3
22.3
M5
M5
M5
M5
M6
M6
M8
M8
M10
M10
115
115
135
135
165
165
200
200
250
250
0.5
0.5
0.5
0.5
0.5
0.5
0.5
1.0
1.0
1.6
1.65
1.65
1.65
1.65
1.65
1.65
-
2.1
2.1
2.8
2.8
2.8
2.8
-
66.6
66.6
71.6
96.6
109.0
117.0
129.0
142.0
174.0
193.0
129.8
140.9
223.3
230.4
240.2
259.4
-
21.2
21.2
25.2
32.3
42.3
49.4
57.2
71.4
89.0
108.5
14.1
17.5
22.4
27.4
34.2
43.0
49.0
61.1
77.1
90.2
9.2
12.5
15.8
21.0
26.6
35.1
40.9
52.5
68.9
77.9
21.7
27.2
34.0
42.7
48.6
60.5
-
66
66
84
88
98
101
117
125
165
174
0.62
0.60
0.82
1.42
2.02
2.76
4.12
6.00
9.48
15.64
8
10
15
20
25
32
40
50
65
80
ØN1: refer to thread options: NPT, BSPT, BSPP, DIN 2999
REDUCED BORE DIMENSIONS (mm)
NPS
½
¾
1
1¼
1½
2
2½
3
4
DN
15
20
25
32
40
50
65
80
100
Ød
12.7
15.0
20.0
25.0
31.8
38.1
50.8
65.0
80.0
A
12.2
15.0
20.0
21.4
21.7
25.6
25.2
42.7
39.4
B
5.6
9.3
12.5
13.4
13.8
15.6
16.3
25.2
24.8
G
5.0
6.3
6.3
8.0
8.0
9.5
9.5
17.0
17.0
ØP
36
42
42
50
50
70
70
102
102
F
8.0
9.7
9.7
11.2
11.2
16.0
16.0
22.3
22.3
W
M5
M5
M5
M6
M6
M8
M8
M10
M10
M
115
135
135
165
165
200
200
250
250
t1
0.5
0.5
0.5
0.5
0.5
1.0
1.0
1.6
1.6
L1
66.6
71.6
96.6
109.0
117.0
129.0
142.0
174.0
193.0
L4
21.2
25.2
32.3
42.3
49.4
57.2
71.4
89.0
108.5
ØN2
22.4
27.4
34.2
43.0
49.0
61.1
77.1
90.2
115.1
ØN3
15.8
21.0
26.6
35.1
40.9
52.5
68.9
77.9
102.3
H1
66
84
85
98
101
117
125
165
174
Wt (kg)
0.63
0.85
1.48
2.08
2.82
4.32
5.89
9.63
15.44
ØN1: refer to thread options: NPT, BSPT, BSPP, DIN 2999
19
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F180F - THREE-PIECE BALL VALVE - FIRE SAFE
19
18
12
11
Metal to metal
Seat
10
9
8
Before fire
After fire
DETAIL A
MATERIALS OF CONSTRUCTION
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Part name
Body
Cap
Ball
Bolt
Ball seat
Body gasket
Anti-static shaft
Shaft packing
Thrust washer
Gland
Belleville washer
Locking trigger
Lower shaft seal
Compress ring
Upper shaft seal
Stop bolt
Lock saddle
Shaft nut
Handle
Handle sleeve
Rivet
* Stainless steel welded connectors are CF 3M/1.4409
Material
CF8M / WCB, 1.4408 / 1.0619
CF8M / WCB, 1.4408 / 1.0619
A2-70
A2-70
RPTFE
Graphite
A276 Type 316
Graphite
50% SS powder / 50% PTFE
304SS
301SS
Stainless steel
50% SS powder / 50% PTFE
316L SS
Graphite
Stainless steel
Stainless steel
304SS
CF8
Vinyl
304SS
Quantity
1
2*
1
8-12
2
2
1
1 set
1
1
2
1
1
1
1
1
1
2
1
1
1
FEATURES
• Patented ‘SEALMASTER’ shaft arrangement
for DN 15 (NPS ½) (full bore) and larger sizes
• Double shaft seal design
• Blow-out proof shaft
• ISO 5211 mounting plate
• Anti-static design
• Valve pressure rating:
DN 8 - 50 (NPS ¼ - 2) - ASME Class 600
DN 65 - 80 (NPS 2½ - 3) - ASME Class 300
• End connections, screwed, butt weld and
socket weld
• Secondary metal to metal seating surface
• Fire tested to API 607 5th edition /
ISO 10497:2004
• Size range DN 8 - 80 (NPS ¼ - 3)
- Reduced bore to DN 100 (NPS 4)
• Tightness to EN 12266-1, Rate A
• Optional casting per AD200-W0
• Patented ‘POSILOCK’ handle for DN 15 - 50
(NPS ½ - 2)
- Full bore
NOTE
For Pressure/Temperature charts, please refer to
page 33
20
H1
H1
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F180F - THREE-PIECE BALL VALVE - FIRE SAFE
L4
L4
Threaded end
Socket weld
FULL BORE DIMENSIONS (mm)
NPS
¼
⅜
½
¾
1
1¼
1½
2
2½
3
DN
8
10
15
20
25
32
40
50
65
80
Ød
11.2
12.7
15.0
20.0
25.0
31.8
38.1
50.8
65.0
76.0
A
12.7
12.7
15.0
20.0
21.4
21.7
25.6
24.2
42.2
35.4
B
5.6
5.6
9.3
12.5
13.4
13.8
15.6
15.3
24.7
24.8
Side view
Full bore:
DN 10 (NPS ⅜)
Reduced bore:
DN 15 (NPS ½)
Butt weld
G
5.0
5.0
6.3
6.3
8.0
8.0
9.5
9.5
17.0
17.0
ØP
36
36
42
42
50
50
70
70
102
102
ØF
8.0
8.0
9.7
9.7
11.2
11.2
16.0
16.0
22.3
22.3
W
M5
M5
M5
M5
M6
M6
M8
M8
M10
M10
H1
66
66
84
88
98
101
117
125
165
174
Side view
Full bore:
DN 50 - 80 (NPS 2 - 3)
Reduced bore:
DN 65 - 80 (NPS 2½ - 3)
Side view
Full bore:
DN 15 - 40 (NPS ½ - 1½)
Reduced bore:
DN 20 - 50 (NPS ¾ - 2)
L1
66.6
66.6
71.6
96.6
109.0
117.0
129.0
142.0
174.0
193.0
L4
21.2
21.2
25.2
32.3
42.3
49.4
57.2
71.4
89.0
108.5
M
115
115
135
135
165
165
200
200
250
250
H1
66
84
88
98
101
117
125
165
174
L1
66.6
71.6
96.6
109.0
117.0
129.0
142.0
174.0
193.0
L4
21.2
25.2
32.3
42.3
49.4
57.2
71.4
89.0
108.5
ØN2
14.1
17.5
22.4
27.4
34.2
43.0
49.0
61.1
77.1
90.2
ØN3
9.2
12.5
15.8
21.0
26.6
35.1
40.9
52.5
68.9
77.9
t
0.5
0.5
0.5
0.5
0.5
0.5
0.5
1.0
1.0
1.6
Wt (kg)
0.62
0.62
0.88
1.40
1.96
2.72
4.04
6.56
-
ØN1: refer to thread options: NPT, BSPT, BSPP, DIN 2999
REDUCED BORE DIMENSIONS (mm)
NPS
½
¾
1
1¼
1½
2
2½
3
4
DN
15
20
25
32
40
50
65
80
100
Ød
12.7
15.0
20.0
25.0
31.8
38.1
50.8
65.0
76.0
A
12.7
15.0
20.0
21.4
21.7
25.6
24.2
42.2
35.4
B
5.6
9.3
12.5
13.4
13.8
15.6
15.3
24.7
24.8
G
5.0
6.3
6.3
8.0
8.0
9.5
9.5
17.0
17.0
ØP
36
42
42
50
50
70
70
102
102
F
8.0
9.7­
9.7
11.2­
11.2
16.0
16.0
22.3
22.3
W
M5
M5
M5
M6
M6
M8
M8
M10
M10
M
115
135
135
165
165
200
200
250
250
ØN2
22.4
27.4
34.2
43.0
49.0
61.1
77.1
90.2
115.1
ØN3
15.8
21.0
26.6
35.1
40.9
52.5
68.9
77.9
105.2
t
0.5
0.5
0.5
0.5
0.5
1.0
1.0
1.6
1.6­
ØN1: refer to thread options: NPT, BSPT, BSPP, DIN 2999
21
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F190 - SPLIT BODY FLANGED BALL VALVE
11
12
13
14
15
16
17
18 23 24
22
10
9
8
6
4
21
20
19
2
7
7a
3
5
MATERIALS OF CONSTRUCTION
No.
1*
2*
3
4
5
6
7
7a
8
9
Part name
Body
Cap
Ball
Anti-static shaft
Ball seat
Body seal
Stud
Nut
Lower shaft seal
Compress ring
10
11
12
13
14
15
16
17
18
Upper shaft seal
V-ring shaft packing
Thrust washer
Gland
Belleville washer
Lock saddle
Shaft nut
Stop bolt
Handle
DN 15 - 50 (NPS ½ - 2)
Triangle stopper
DN 65 - 300 (NPS 2½ - 12)
Handle adapter
DN 65 - 300 (NPS 2½ - 12)
Handle
DN 65 - 300 (NPS 2½ - 12)
Locking trigger
Handle sleeve
Rivet
19
20
21
22
23
24
Handle for valve
Sizes DN 65 - 300
(NPS 2½ - 12)
1
Material
ASTM A351 Gr. CF8M / ASTM A216 Gr. WCB
ASTM A351 Gr. CF8M / ASTM A216 Gr. WCB
ASTM A351 Gr. CF8M
A276 Type 316 (Note 1)
PTFE
PTFE
A193 Gr. B8 / A193 Gr. B7
A194 Gr. 8 / A194 Gr. 2H
50% SS powder / 50% PTFE
316L SS DN 15 - 100 (NPS ½ - 4) /
316 SS DN 125 - 300 (NPS 5 - 12)
TFM 1600
PTFE
50% SS powder / 50% PTFE
304SS
301SS
Stainless steel
304SS
Stainless steel
CF8
Quantity
1
1
1
1
2
1
4-26
4-26
1
1
1
1 set
1
1
2
1
1-2
1-2
1
Stainless steel
1
CF8 DN 65 - 125 (NPS 2½ - 5)
1
SGP Zn plating
1
Stainless steel
Vinyl
304SS
1
1
1
* For DIN valves, the body and cap material will be 1.4408/1.0619.
* For JIS valves, the body and cap material will be SCS14A/SCPH2
Note 1: Standard shaft material
Body material
CF8M, SCS14A, 1.4408
WCB, SCPH2, 1.0619
Size
NPS ½ - 4
NPS 6
NPS 8 - 12
NPS ½ - 4
NPS 6
NPS 8 - 12
Class 150, 10K, PN 10/16
316
316
2205 (A276-S31803)
316
316
17-4 (A564-630)
FEATURES
• Patented ‘SEALMASTER’ shaft arrangement
• Double shaft sealing complies with TA Luft
fugitive emission requirements
• Blow-out proof shaft
• ISO 5211 mounting plate
• Anti-static design according to EN 1983 /
ISO 17292
• Valve pressure rating:
- ASME Class 150/300
- DIN PN 10/16/25/40
- JIS 10K/20K
• Two piece, split body ball valve with flanged
ends
• Carbon steel or stainless steel bodies
• Locking device
• Various seat material options
• Investment cast body
- DN 15 - 100 (NPS ½ - 4)
• Sand cast body
- DN 125 - 300 (NPS 5 - 12)
• Size range DN 15 - 300 (NPS ½ - 12)
- Full bore
• Tightness to EN 12266-1, Rate A
• Optional casting per AD2000-W0
• Patented ‘POSILOCK’ handle for DN 15 - 50
(NPS ½ - 2)
- Full bore
NOTE
For Pressure/Temperature charts, please refer to
page 34 and 35
Class 300, 20K, PN 25/40
316
2205 (A276-S31803)
2205 (A276-S31803)
316
17-4 (A564-630)
17-4 (A564-630)
22
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F190F - SPLIT BODY FLANGED BALL VALVE - FIRE SAFE
11
12
13
14
15
16
17
18 23 24
22
10
9
8
6
4
21
20
19
2
7
7a
3
5
MATERIALS OF CONSTRUCTION
No.
1*
2*
3
4
5
6
Part name
Body
Cap
Ball
Anti-static shaft
Ball seat
Body seal
7
7a
8
9
Stud
Nut
Lower shaft seal
Compress ring
10
11
12
13
14
15
16
17
18
Upper shaft seal
Shaft packing
Thrust washer
Gland
Belleville washer
Lock saddle
Shaft nut
Stop bolt
Handle
DN 15 - 50 (NPS ½ - 2)
Triangle stopper
DN 65 - 300 (NPS 2½ - 12)
Handle adapter
DN 65 - 300 (NPS 2½ - 12)
Handle
DN 65 - 300 (NPS 2½ - 12)
Locking trigger
Handle sleeve
Rivet
19
20
21
22
23
24
Handle for valve
Size DN 65 - 300
(NPS 2½ - 12)
1
Material
ASTM A351 Gr. CF8M / ASTM A216 Gr. WCB
ASTM A351 Gr. CF8M / ASTM A216 Gr. WCB
ASTM A351 Gr. CF8M
A276 Type 316 (Note 1)
PTFE
Graphite DN 15 - 100 (NPS ½ - 4) /
316SS Spiral wound graphite
DN 125 - 300 (NPS 5 - 12)
A193 Gr.B8 / A193 Gr.B7
A194 Gr. 8 / A194 Gr. 2H
50% SS powder / 50% PTFE
316L SS DN 15 - 100 (NPS ½ - 4) /
316 SS DN 125 - 300 (NPS 5 - 12)
Graphite
Graphite
50% SS powder / 50% PTFE
304SS
301SS
Stainless steel
304SS
Stainless steel
CF8
Quantity
1
1
1
1
2
1
4-26
4-26
1
1
1
1 set
1
1
2
1
1-2
1-2
1
Stainless steel
1
CF8 DN 65 - 125 (NPS 2½ - 5)
A536 DN 150 - 300 (NPS 6 - 12)
SGP Zn plating
1
Stainless steel
Vinyl
304SS
1
1
1
1
FEATURES
• Patented ‘SEALMASTER’ shaft arrangement
• Double shaft seal design
• Blow-out proof shaft
• ISO 5211 mounting plate
• Anti-static design according to EN 1983 /
ISO 17292 / BS5351
• Valve pressure rating:
- ASME Class 150/300
- DIN PN 10/16/25/40
- JIS 10K/20K
• Two-piece, split-body ball valve
• Flexible graphite body and shaft packing for
Hi-temp resistance
• Secondary metal to metal seating surface
• Fire tested:
DN 15 - 200 (NPS ½ - 8):
- API 607 5th edition
- ISO 10497:2004
DN 50 - 300 (NPS 10-12):
- API 607 4th edition
• Size range DN 15 - 300 (NPS ½ - 12)
- Full bore
• Tightness to EN 12266-1, Rate A
• Patented ‘POSILOCK’ handle for DN 15 - 50
(NPS ½ - 2)
- Full bore
NOTE
For Pressure/Temperature charts, please refer to
page 34 and 35
* For DIN valves, the body and cap material will be 1.4408/1.0619.
* For JIS valves, the body and cap material will be SCS14A/SCPH2
Note 1: Standard shaft material
Body material
CF8M, SCS14A, 1.4408
WCB, SCPH2, 1.0619
Size
NPS ½ - 4
NPS 6
NPS 8 - 12
NPS ½ - 4
NPS 6
NPS 8 - 12
Class 150, 10K, PN 10/16
316
316
2205 (A276-S31803)
316
316
17-4 (A564-630)
Class 300, 20K, PN 25/40
316
2205 (A276-S31803)
2205 (A276-S31803)
316
17-4 (A564-630)
17-4 (A564-630)
23
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F190/190F - SPLIT BODY FLANGED BALL VALVE
Sizes DN 65 - 300
(NPS 2½ - 12)
Ød1
ØC
ØB
ØD
H
K
J
Sizes DN 15 - 50
(NPS ½ - 2)
T
L
DN 15 - 100
(NPS ½ - 4)
DIMENSIONS (mm)
NPS
½
¾
1
1¼
1½
2
2½
3
4
5
6
8
10
12
DN
15
20
25
32
40
50
65
80
100
125
150
200
250
300
A
20.3
20.5
21.6
21.6
26.0
26.0
43.0
43.5
49.0
53.6
65.0
65.0
83.5
83.5
DN 250 - 300
(NPS 10 - 12)
DN 125 - 200
(NPS 5 - 8)
ØP
42
42
50
50
70
70
102
102
102
102
125
125
140
140
F
9.7
9.7
11.2
11.2
16.0
16.0
22.3
22.3
28.6
28.6
34.0
34.0
50.0
50.0
G
6.3
6.3
8.0
8.0
9.5
9.5
17.0
17.0
17.0
17.0
23.0
23.0
30.0
30.0
B
12.0
12.4
14.0
14.0
16.2
16.2
24.7
25.2
30.0
33.0
39.0
39.0
52.0
52.0
W
M5
M5­
M6
M6­
M8
M8
M10*
M10*
M10*
M10*
M12
M12
M16
M16
f
DN 250 - 300
(NPS 10 - 12)
Optional
M
135
135
165
165
200
200
495
495
595
595
800
1100
1100
1100
H
38.5
42.0
51.5
56.2
65.5
74.5
88.0
101.0
122.0
140.0
167.0
203.0
263.0
305.0
H1
82
86
98
102
119
128
162
172
197
226
281
317
378
420
J
161
190
190
221
221
K
393
513
549
625
667
X
40
40
Y
47
47
* For DN 65 - 125 (NPS 2½ - 5) JIS 10K/20K, W = M12
24
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F190/190F - SPLIT BODY FLANGED BALL VALVE
ASME 150/300 DIMENSIONS (mm)
ØB
NPS
½
¾
1
1½
2
2½
3
4
5
6
8
10
12
DN
15
20
25
40
50
65
80
100
125
150
200
250
300
150
60.5
70.0
79.5
98.5
120.5
139.5
152.5
190.5
215.9
241.3
298.4
361.9
431.8
300
66.5
82.5
89.0
114.5
127.0
149.0
168.0
200.0
234.9
269.9
330.2
387.3
450.8
ØD
150
89.0
98.6
108.0
127.0
152.5
178.0
190.5
229.0
254.0
279.4
342.9
406.4
484.0
L
300
95.0
117.0
124.0
156.0
165.0
190.0
210.0
254.0
279.4
317.5
381.0
444.5
522.0
150
108.0
117.0
127.0
165.0
178.0
190.0
203.0
229.0
355.6
393.7
457.2
533.4
609.6
N
300
140.0
152.0
165.0
190.0
216.0
241.0
283.0
305.0
381.0
403.4
501.7
568.5
647.7
150
4
4
4
4
4
4
4
8
8
8
8
12
12
T
300
4
4
4
4
8
8
8
8
8
12
12
16
16
150
11.2
11.2
11.2
14.2
15.9
17.5
19.1
23.9
23.9
25.4
28.6
30.5
31.8
Øn
300
14.3
15.9
17.5
20.7
22.3
25.4
28.6
31.8
34.9
36.6
41.3
48.0
50.8
150
16.0
16.0
16.0
16.0
19.0
19.0
19.0
19.0
22.2
22.2
22.2
25.4
25.4
300
16.0
19.0
19.0
22.0
19.0
22.0
22.0
22.0
22.2
22.2
25.4
28.6
31.8
ØC
35
43
51
73
92
105
127
157
186
216
270
324
381
Ød1
15
20
25
40
50
65
76
100
125
150
200
250
300
f
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
Wt (kg)
150
300
1.82
2.20
2.12
3.25
3.04
4.48
5.80
8.70
8.36
11.20
15.00
19.00
19.92
28.00
32.90
43.72
49.00
71.00
75.00 100.00
128.00 172.00
215.00 291.00
254.00 423.00
Face to face dimensions to ASME B16.10
DIN PN 10/16/25/40 DIMENSIONS (mm)
NPS
½
¾
1
1¼
1½
2
DN
15
20
25
32
40
50
2½
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
PN
10/16/25/40
10/16/25/40
10/16/25/40
10/16/25/40
10/16/25/40
10/16
25/40
10/16
25/40
10/16
25/40
10/16
25/40
10/16
25/40
10/16
25/40
10
16
25
40
10
16
10
16
ØB
65
75
85
100
110
125
125
145
145
160
160
180
190
210
220
240
250
295
295
310
320
350
355
400
410
Wt (kg)
ØC
45
58
68
78
88
102
102
122
122
138
138
158
162
188
188
212
218
268
268
278
285
320
320
370
378
­L Dimensions EN 558 Series 27
ØB
10K
70
75
90
100
105
120
140
150
175
210
240
290
355
400
ØC
20K
70
75
90
105
120
140
160
182
225
260
305
380
430
10K
51
56
67
76
81
96
116
126
151
185
212
262
324
368
L
115
120
125
130
140
150
150
170
170
180
180
190
190
325
325
350
350
400
400
400
400
450
450
500
500
*L
130
150
160
180
200
230
230
290
290
310
310
350
350
400
400
480
480
600
600
600
600
730
730
850
850
N
4
4
4
4
4
4
4
4
8
8
8
8
8
8
8
8
8
8
12
12
12
12
12
12
12
T
16
18
18
18
18
18
20
18
22
20
24
20
24
22
26
22
28
24
24
30
34
26
26
26
28
Øn
14
14
14
18
18
18
18
18
18
18
18
18
22
18
26
22
26
22
22
26
30
22
26
22
26
Ød1
15
20
25
32
40
50
50
65
65
80
80
100
100
125
125
150
150
200
200
200
200
250
250
300
300
f
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
F1
2.42
3.24
4.42
6.10
7.94
10.50
10.50
17.00
18.30
21.50
24.90
34.00
37.20
50.00
60.00
78.00
92.00
124.00
124.00
164.00
164.00
270.00
270.00
-
F4/F5
2.46
3.08
4.18
5.62
7.40
9.76
9.76
16.60
16.22
21.40
21.34
27.72
31.42
48.00
57.00
73.00
82.00
98.00
98.00
148.00
148.00
203.00
203.00
233.00
233.00
*L Dimensions EN 558 Series 1
JIS 10K/20K DIMENSIONS (mm)
NPS DN
½
15A
¾
20A
1
25A
1¼
32A
1½
40A
2
50A
2½
65A
3
80A
4
100A
5
125A
6
150A
8
200A
10
250A
12
300A
ØD
95
105
115
140
150
165
165
185
185
200
200
220
235
250
270
285
300
340
340
360
375
395
405
445
460
ØD
20K
51
56
67
81
96
116
132
160
195
230
275
345
395
10K
95
100
125
135
140
155
175
185
210
250
280
330
400
445
L
20K
95
100
125
140
155
175
200
225
270
305
350
430
480
10K
108
117
127
140
165
178
190
203
229
356
394
457
533
610
N
20K
140
152
165
190
216
241
283
305
381
403
502
568
648
10K
4
4
4
4
4
4
4
8
8
8
8
12
12
16
T
20K
4
4
4
4
8
8
8
8
8
12
12
12
16
10K
12
14
14
16
16
16
18
18
18
20
22
22
24
24
20K
14
16
16
18
18
20
22
24
26
28
30
34
36
Øn
10K 20K
15
15
15
15
19
19
19
19
19
19
19
19
19
19
23
19
23
23
25
23
25
23
25
25
27
25
27
J
161
190
190
221
221
K
393
513
549
625
667
Ød1
15
20
25
32
40
50
65
76
100
125
150
201
250
300
f
1
1
1
2
2
2
2
2
2
2
2
2
2
3
H
38.5
42.0
51.5
56.2
65.5
74.5
90.0
101.0
122.0
140.0
167.0
203.0
263.0
305.0
Wt (kg)
10K
20K
2.10
2.36
2.50
2.80
3.86
4.55
5.50
6.48
7.16
8.40
8.92
13.80
15.50
18.60
23.24
27.36
34.10
46.00
69.00
73.00
92.00
120.00 139.00
201.00 291.00
254.00 423.00
25
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
FLOW PLAN CHART (ONLY FOR 3-WAY BALL VALVE)
T-PORT 90° TURN
Position 1
Position 2
Position 1
FLOW PLAN D
Position 2
FLOW PLAN E
Position 1
Position 2
Position 1
FLOW PLAN F
Position 2
FLOW PLAN G
T-PORT 180° TURN
Position 1
Position 2
Position 3
Position 1
FLOW PLAN H
Position 1
Position 2
Position 3
L-PORT 90° TURN
Position 1
Position 2
Position 3
FLOW PLAN K
L-PORT 180° TURN
Position 2
Position 1
FLOW PLAN A
Position 2
Position 3
FLOW PLAN B
LL-PORT* 90° TURN
(not available for F133MT, F138 and F139)
Position 1
Position 3
FLOW PLAN I
FLOW PLAN J
Position 1
Position 2
Position 2
FLOW PLAN M
LL-PORT 180° TURN
(not available for F138 and F139) 4-way valves
Position 1
Position 2
Position 3
FLOW PLAN N
* Please consult factory for minimum quantity.
26
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
COMPLETE VALVE RANGE
AVAILABILITY MATRIX (MODELS AND SIZES AVAILABLE)
Model
F110
F120
F130M
F133M
F138
F171
F171T
F180
F180F
F190
F190F
DN
NPS
- SS
- SS
- SS
- CS
- SS
- CS
- SS
- SS
- CS
- SS
- SS
- SS
- CS
- SS
- CS
- SS
- CS
8
¼
•
•
10
⅜
•
•
•
•
•
•
•
•
•
•
•
•
•
•
15
½
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
20
¾
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
25
1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
32
1¼
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
40
1½
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50
2
•
•
•
•
• RB
• RB
•
•
•
•
•
•
•
•
•
•
•
65
2½
80
3
100
4
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
125
5
150
6
200
8
250
10
300
12
•
•
• RB
• RB
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SS = Stainless Steel
CS = Carbon Steel
RB = Reduced Bore
F171 DIFFERENTIAL-PRESSURE TORQUE (Nm)
Seat:
PTFE / RPTFE
NPS
DN
½
15
¾
20
1
25
1¼
32
1½
40
2
50
2½
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
0
6.2
8.8
12.0
13.5
18.0
21.0
42.5
61.0
80.0
149.5
235.0
322.0
460.0
590.0
6.9
(100)
6.4
9.0
12.5
14.0
18.5
21.5
45.0
64.0
83.0
155.0
402.5
440.0
747.5
890.0
Pressure: bar (psi)
20.7
48.3
(300)
(700)
6.8
7.2
9.6
10.5
12.5
13.0
14.5
17.0
19.5
23.5
23.0
38.5
61.0
125.0
83.0
180.0
105.0
213.0
175.0
520.0
560.0
1260.0
1520.0
-
69
(1000)
8.6
11.5
13.0
20.5
33.0
68.0
-
103.4
(1500)
-
MAST (Nm)
A276-316 SS
25.2
25.2
40.2
40.2
18.4
18.4
318.0
318.0
392.0
392.0
637.0
637.0
1313.0
1313.0
27
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
COMPLETE VALVE RANGE
F180, F180F DIFFERENTIAL-PRESSURE TORQUE (Nm)
Seat:
PTFE / RPTFE
NPS
DN
½
15
¾
20
1
25
1¼
32
1½
40
2
50
2½
65
3
80
0
5.1
7.7
9.6
12.5
19.5
25.5
48.0
59.0
6.9
(100)
5.2
7.7
9.8
12.5
20.0
27.5
53.0
63.0
Pressure: bar (psi)
20.7
48.3
(300)
(700)
5.2
5.2
7.8
7.8
10.0
10.0
13.0
16.5
21.0
25.5
31.0
41.0
65.0
125.0
85.0
180.0
F190, F190F DIFFERENTIAL-PRESSURE TORQUE (Nm)
Seat:
PTFE / RPTFE
NPS
DN
½
15
¾
20
1
25
1¼
32
1½
40
2
50
2½
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
0
8.4
11.5
13.5
14.0
23.5
30.5
42.5
58.0
82.0
125.0
175.0
180.0
350.0
470.0
6.9
(100)
8.6
12.5
13.5
14.2
24.0
31.0
46.0
82.0
88.0
130.0
240.0
300.0
760.0
870.0
F130M, F133M MAX. BREAK-AWAY TORQUE
Seat: PTFE / RPTFE
NPS
DN
⅜
½
¾
1
1¼
1½
2
2½
3
4
6
10
15
20
25
32
40
50
65
80
100
150
13.8
(200)
8.7
12.5
14.0
14.4
24.5
31.5
50.0
100.0
110.0
150.0
305.0
420.0
1250.0
1500.0
Nm
kgfcm
MAST (Nm)
A276-316 SS
9.0
10.0
11.0
17.0
23.0
40.0
51.0
90.0
169.0
339.0
450.0
91.8
102.0
112.2
173.4
234.6
408.0
520.2
918.0
1723.8
3457.8
4590.0
25.2
25.2
25.2
40.2
40.2
78.4
78.4
318.0
318.0
392.0
637.0
69
(1000)
5.4
8.0
10.2
21.0
36.0
57.0
-
103.4
(1500)
5.4
8.0
10.2
28.5
54.0
70.0
-
Pressure: bar (psi)
20.7
27.6
(300)
(400)
8.9
9.1
13.0
13.0
14.5
15.0
15.3
16.8
25.0
25.5
31.5
32.0
52.0
58.0
125.0
145.0
145.0
175.0
190.0
240.0
490.0
650.0
690.0
870.0
1700.0
2050.0
2350.0
-
MAST (Nm)
A276-316 SS
(Note 8)
25.2
25.2
40.2
40.2
78.4
78.4
318.0
318.0
34.5
(500)
9.5
13.5
16.0
18.1
26.0
32.5
65.0
155.0
210.0
300.0
750.0
-
42.2
(600)
10.0
14.5
17.0
19.8
27.0
33.5
72.0
170.0
250.0
-
49.2
(700)
10.6
15.5
18.5
21.6
28.5
35.0
80.0
185.0
295.0
-
MAST (Nm)
A276-316 SS
25.2
25.2
40.2
40.2
78.4
78.4
318.0
318.0
392.0
392.0
637.0
637.0
1313.0
1313.0
NOTES
1. Increase by 25% for MG1241, carbon and SS filled seat.
2. Increase by 15% for dry gas or oil free products.
3. Increase by 40% for dry gas (-100°C and below).
4. Increase by 40% for gas or liquid with slurry powder (above -100°C).
5. Increase by 40% for high viscosity fluid (above -100°C).
6. For actuator sizing, we recommend to add at least 20% of the break-away torque of valve as safety factor.
7. Valve torques refer to ball valves with full port. For reduced port valve torque take one size smaller.
8. MAST (maximum allowable shaft torque) for full bore option. Other shaft options available.
28
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
SEALMASTER®
Part name:
1.Handle
2.Spring
3.Locking trigger
POSILOCK HANDLE­
1
3
2
Pull the locking
trigger up
Spring compressed
Release the trigger.
And the elasticity of the
spring makes the trigger
automatically bounce back
to its original position
PARTS LIST
No.
1
2
3
Parts name
Handle
Spring
Locking trigger
FEATURES
• Simple construction
• Smooth action for locking trigger
• Wrapped locking trigger design prevents the spring from coming out
• The elasticity of the spring makes the trigger automatically bounce back to its original position,
which keeps the plate in position for firm locking. This also avoids unwanted valve operation
caused by accident.
PATENTED SEALMASTER® SHAFT SEAL ARRANGEMENT - AVAILABLE FOR FIGURES F130M,
F133M, F171, F180, F190
Our extremely high cycle shaft sealing design is accomplished by double sealing system. The high
performance of our ball valves is mainly due to unique SEALMASTER® shaft seal arrangement,
which provides a primary ­sealing. It has been specially designed and constructed to prevent
line fluid permeation and resultant leakage. On top of this arrangement are multiple layers of
V-ring shaft packing, this acts as secondary sealing. A set of Belleville washers automatically and
constantly compresses the seals to adjust for wear, pressure and temperature fluctuations. Our
ball valve is a stalwart barrier against fugitive emissions.
Belleville washers
V-ring shaft packing
SEALMASTER®
29
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
SEALMASTER®
EXPLANATION OF SEALMASTER®
The live loaded SEALMASTER® is a combination of 3 components; (A) a cup and cone PFA/TFE
upper thrust seal, (B) a cup and cone sintered SS316 center load ring and (C) a flat SS/TFE lower
thrust seal. When tightened, the live loaded shaft pulls up and compressing the shaft thrust seals.
As this happens, material from upper and lower thrust seal extrude between shaft and body
enclosures. (See 1 - 6). The surfaces between the bottom of lower thrust seal and top of shaft
flange are smooth and all rotation occurs between these two surfaces leaving the shaft thrust
seal ‘static’ to create the best possible seal. As rotation continues, components bed in and keep
seal performance constant with usage.
A
B
C
MAIN FEATURES OF SEALMASTER® - PATENTED SHAFT SEAL ARRANGEMENT
• ‘Multiple’ sealing up to 6 areas (see view 1 - 6).
• Encapsulated ‘static’ sealing achieved on upper thrust seal.
• Constant sealing force transmitted to shaft (see arrow) and making the shaft primary sealing
‘positive’.
• Excellent wear resistance on lower thrust seal (50% SS filled PTFE).
A
• Standard shaft finish better than Ra 0.8 µm (150 Grit) to reduce seals friction to a minimum.
1
2
3
4
5
6
B
A
C
SHAFT SEAL ARRANGEMENT
B
5
7
5
7
C
6
1
6
5
4
1
5
3
4
2
1
DN 8 (NPS ¼)
DN 8 - 10 (NPS ¼ - ⅜)
2
1
F133M
F171, F180 and F180F
Patented SEALMASTER
DN 8 - 40 (NPS ¼ - 1½)
DN 50 - 150 (NPS 2 - 6)
DN 15 - 300 (NPS ½ - 12)
No.
1
2
3
4
5
6
7
3
Part name
Lower thrust washer
Compress ring
Upper thrust washer
V-ring shaft packing
Thrust washer
Flat thrust washer
Shaft packing
Material
50% SS powder / 50% PTFE
316 SS
TFM 1600
PTFE
50% SS powder / 50% PTFE
50% SS powder / 50% PTFE
15% Graphite + PTFE
F133M
F130M
F171, F171T,
F180, F180F and
F190/F190F
Shaft seal arrangement
■
■
■
■
Patented SEALMASTER
shaft seal arrangement
■
■
■
■
■
■ means available
30
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F110, F120, F130M - PRESSURE/TEMPERATURE CHARTS
1000
68.9
55.1
800
55.1
800
41.4
600
41.4
600
27.5
400
27.5
400
13.8
200
13.8
200
50
100 150 200 250 300 °C
(122) (212) (302) (392) (482) (572) °F
-10
(14)
Pressure in psi
50
100 150 200 250 300 °C
(122) (212) (302) (392) (482) (572) °F
Temperature
Temperature
F130M
THREE-WAY SPLIT-BODY BALL VALVE
ASME Class 150:
DN 50 to DN 150 (NPS 2 to NPS 6) - full bore
DN 200 (NPS 8) - reduced bore
F130M
THREE-WAY SPLIT-BODY BALL VALVE
PN 16, PN 10:
DN 50 to DN 150 (NPS 2 to NPS 6) - full bore
DN 200 (NPS 8) - reduced bore
1200
82.7
1200
68.9
1000
68.9
1000
55.1
800
55.1
800
41.4
600
41.4
600
27.5
13.8
R
PN16
PN16
-10
(14)
PN10
PN10
400
27.5
Class 150
200
50
100 150 200 250 300 °C
(122) (212) (302) (392) (482) (572) °F
Temperature
Pressure in bar
82.7
Pressure in psi
Pressure in bar
1000
T
-10
(14)
1200
13.8
R
Class 150
Pressure in psi
T
Pressure in bar
82.7
68.9
Pressure in bar
F120
TWO-PIECE BODY BALL VALVE
DN 8 to DN 50 (NPS ¼ to NPS 2) - full bore
1200
Pressure in psi
82.7
F110
ONE-PIECE BODY BALL VALVE
DN 8 to DN 50 (NPS ¼ to NPS 2) - reduced bore
400
200
-29 0
50
100 150 200 250 300 °C
(-20) (32) (122) (212) (302) (392) (482) (572) °F
Temperature
= 1.0619 body rating
= 1.4408 body rating
= WCB body rating
= CF8M body rating
T = PTFE
R = RPTFE
31
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F133, F138, F155 - PRESSURE/TEMPERATURE CHARTS
F133M/F133MT
THREE- AND FOUR-WAY SPLIT-BODY BALL VALVE
ASME Class 150/300:
DN 10 to DN 40 (NPS ⅜ to NPS 1½) - full bore
DN 15 to DN 50 (NPS ½ to NPS 2) - reduced bore
1200
82.7
1200
68.9
1000
68.9
1000
800
55.1
55.1
T
41.4
R
PN 4
0
PN40
27.5
400
PN25
PN25
13.8
PN10
PN10
-10
(14)
600
41.4
800
Class 300
Class 300
Pressure in psi
PN63
PN63
Pressure in bar
82.7
Pressure in psi
Pressure in bar
F133M/F133MT
THREE- AND FOUR-WAY SPLIT-BODY BALL VALVE
PN 63, PN 40, PN 25, PN 16, PN 10:
DN 10 to DN 40 (NPS ⅜ to NPS 1½) - full bore
DN 15 to DN 50 (NPS ½ to NPS 2) - reduced bore
600
T
R
27.5
400
Class 150
PN16
PN16
200
13.8
50
100 150 200 250 300 °C
(122) (212) (302) (392) (482) (572) °F
Class 150
200
-29 0
50
100 150 200 250 300 °C
(-20) (32) (122) (212) (302) (392) (482) (572) °F
Temperature
Temperature
F138
THREE-WAY MULTI-PORT BALL VALVE
DN 8 to DN 50 (NPS ¼ to NPS 2) - reduced bore
F155
THREE-PIECE ECONOMICAL BALL VALVE
82.7
1200
82.7
68.9
1000
68.9
1000
55.1
800
55.1
800
41.4
600
DN 8 to DN 50 Rating: PN63
1200
41.4
600
T
27.5
400
27.5
400
13.8
200
13.8
200
-10
(14)
50
100 150 200 250 300 °C
(122) (212) (302) (392) (482) (572) °F
Temperature
-10
(14)
Pressure in psi
Pressure in bar
R
Pressure in psi
Pressure in bar
DN 65 to DN 100 Rating: PN40
50
100 150 200 250 300 °C
(122) (212) (302) (392) (482) (572) °F
Temperature
= 1.0619 body rating
= 1.4408 body rating
= WCB body rating
= CF8M body rating
T = PTFE
R = RPTFE
32
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F171/F171T, F180/F180F - PRESSURE/TEMPERATURE CHARTS
1200
F171
THREE-PIECE BALL VALVE TO ISO 5211
68.9PN 63, PN 40:
DN 8 to DN 40 (NPS ¼ to NPS 1½) - full bore
82.7
PN 3
DN 50 to 6DN
100 (NPS 2 to NPS 4) - full bore
PN63
82.7
55.1
Pressure in bar
PN63
27.5 PN63
55.1
T
13.8
41.4
27.5
PN4
0
PN40
1200
1000
68.9
1000
600
PN63
PN63
55.1
800
T
41.4
S PN40
PN40
4
27.5
400
800
200
600
4
13.8
S
55.1
600
PN4
0
PN40
400
27.5
S
600
600
27.5
K
PN16
PN16
4 S
13.8
T
400
= WCB body
R rating
= CF8M body
4 rating
S
U
K
M
H
200
200 T
200
4
S
50
S
41.4
= UHMWP
= PEEK (ARLON 1330)
= MG1241
= TFM 1600
1200
68.9
PN
10
PN10 0
0
1000
55.1
PN40
PN40
U
R
H 41.4
PN40
PN40
27.5
13.8
-10
(14)
PN
10
PN10 0
0
R
H 800
U
600
K
T
= RPTFE
= 50% SS filled PTFE
1400
1200
= PTFE
= 25% carbon filled PTFE
1400
82.7
13.8
T
R
4
S
U
K
M
H
Note
55.1
200
Temperature
= 1.4408 body
T rating
200
96.5
M
68.9
400
-10 4
100 150 200 250 300 °C
(14)
(122) (212) (302) (392) (482) (572) °F
27.5
-10
50
100 150 200 250 300 °C
-10
50
100 150 200 250 300 °C
(14)
(122) (212) (302) (392) (482) (572) °F
(14)
(122) (212) (302) (392) (482) (572) °F
= 1.0619 body rating
S
-10
50
100 150 200 250 300 °C
(14)
(122) (212) (302) (392) (482) (572) °F
50
100 150 200 250 300 °C
(122) (212) (302) (392) (482) (572) °F
82.7
600
Pressure in bar
R41.4
H
Pressure in psi
800
800
T
PN16
13.8 PN
16
13.8
96.5
800
PN
10
PN10 0
0
55.1
Pressure in bar
1000
1000
1000
27.5
27.5
400
F180/F180F
THREE-PIECE HEAVY DUTY BALL VALVE / FIRE SAFE
PN 100: DN 8 to DN 50 (NPS ¼ to NPS 2) - full bore
DN 15 to DN 65 (NPS ½ to NPS 2½) - reduced bore
PN 40: DN 65 to DN 80 (NPS 2½ to NPS 3) - full bore
DN 80 to DN 100 (NPS 3 to NPS 4) - reduced bore
M
1200
1200
1200
68.9
68.9
PN40
PN40
S
600
Temperature
68.9
U
600
4
4
13.8
F171T
M
96.5THREE-PIECE HIGH PURITY CLEAN BALL VALVE 1400
PN 16:
82.7
DN 125 to DN 300 (NPS 5 to NPS 12) - full bore
41.4
41.4
800
400
13.8
Temperature
55.1
55.1
PN4
0
PN40
27.5
200
200
800
T
41.4
T
41.4
1000
PN63
PN63
55.1
PN63
PN63
-10
50
100 150 200 250 300 °C
(14)
(122) (212) (302) (392) (482) (572) °F
50
100 150 200 250 300 °C
-10
(122) (212) (302) (392) (482) (572) °F
(14)
82.7
82.7
1000
68.9
68.9
400
50
100 150 200 250 300 °C 4
13.8(302) (392) (482) (572) °F
(122) (212)
-10
(14)
-10
(14)
82.7
1200
T
4
4
S
1000
800
Pressure in psi
PN4
0
PN40
1200
800
Pressure in bar
68.9
41.4
1200
Pressure in psi
T
1000
F171T
THREE-PIECE HIGH PURITY CLEAN BALL VALVE
PN 63, PN 40:
DN 15 to DN 40 (NPS ½ to NPS 1½) - full bore
82.7
DN 50 to DN 100 (NPS 2 to NPS 4) - full bore
Pressure in psi
82.7
600
K
S
200
200
-10
50
100 150 200 250 300 °C
(14)
(122) (212) (302) (392) (482) (572) °F
50
100 150 200 250 300 °C
(122) (212) (302) (392) (482) (572) °F
Temperature
NOTE
For PTFE seat, we recommend the maximum operating pressure not
to exceed 68.9 bar (1000 psig) for DN 25 (NPS 1) and larger.
33
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F190/F190F - PRESSURE/TEMPERATURE CHARTS
82.7
1200
F190/F190F - ASME
SPLIT-BODY FLANGED BALL VALVE
1000
68.9
DN 25 to DN 65 (NPS 1 to NPS 2½) - full bore
82.7
1200
41.4
41.4
Pressure in bar
55.1
27.5
55.1
41.4
Class 300
R
U
R
U
T
T
Class 150
13.8
600
H
4
Class 150
600
H
13.8
S
K
K
400
1000
41.4
600
H
55.1
K
4
S
41.4
27.5
400
55.1
400
41.4
800
Class 300
Class 300
R
T
200
U
T
U
27.5
-29
50
100 150 200 250 300 °C
4 S0
13.8 °FClass 150
200 (302) (392)13.8
(-20) (32) 200
(122) (212)
(482) (572)
F190/F190F - ASME
SPLIT-BODY FLANGED BALL VALVE
68.9
DN 80 to DN 100 (NPS 3 to NPS 4) - full bore
82.7
1200
R
27.5
U
27.5
Class 150
13.8
13.8
Class 150
13.8
U
T
H
T
S
4
K
K
400
55.1
800
27.5
600
12
T
600
400
H
K
S
4
41.4
27.5
400
41.4
200
80
T
1000
41.4
600
Note 2
Note 1
S 0
-29
50
100 150 200 250 300 °C
H
Class 150
13.8 °F
200 (302) (392)13.8
(-20) (32) 200
(122) (212)
(482) (572)
T
27.5
Class 300
R T
60
800
Class 300
Class 150
R
800
4
R
4
S
Note 3400
40
4
600
13.8
400
S
20
H
-29S 0
50
100 150 200 250 300 °
200 (302) (392) (482) (572) °
(-20) (32) 200
(122) (212)
4
= Body material 1.0619 Body Rating
1200
1000
55.1
27.5
10
55.1
68.9
Pressure in bar
41.4
-294 S0
50
100 150 200 250 300 °
200 (302) (392) (482) (572) °
(-20) (32) 200
(122) (212)
S
1200
82.7
68.9
1000
Pressure in psi
Pressure in bar
41.4
400
DN 125 to DN 300 (NPS 5 to NPS 12) - full bore
600
800 U
R
20
82.7
800
1000
R 300
Class
K
400
S
40
F190/F190F - ASME
1200
Class 300
HK
4
SPLIT-BODY FLANGED BALL VALVE
1000
68.9
41.4
55.1
K
Temperature
55.1
55.1
600
13.8
1200
68.9
800
600
4
60
°C 300 °C
-29 0 -29
50 0 100 50 150100200150250200300250
°F (572) °F
(-20) (32) (-20)
(122)(32)(212)
(302)
(392)
(482)
(572)
(122)
(212)
(302)
(392)
(482)
82.7
68.9
U
H
R
H
Temperature
82.7
T
1000
R
27.5
Class 150
°C 300 °C
-29 0 -29
50 0 100 50 150100200150250200300250
°F (572) °F
(-20) (32) (-20)
(122)(32)(212)
(302)
(392)
(482)
(572)
(122)
(212)
(302)
(392)
(482)
82.7
80
68.9
R
800
T
27.5
27.5
13.8
U
800
Class 300
68.9
1000
Pressure in bar
1000
68.9
1200
55.1
800
Pressure in psi
68.9
1200
82.7
55.1
10
Pressure in psi
82.7
F190/F190F - ASME
SPLIT-BODY FLANGED BALL VALVE
68.9
DN 15 to DN 20 (NPS ½ to NPS ¾) - full bore
12
82.7
1200
Pressure in psi
82.7
H
H
°C 300 °C
°C 300 °C
-29 0 -29
50 0 100 50 150100200150250200300250
-29 0 -29
50 0 100 50 150100200150250200300250
= °F
Body material
1.4408 Body
Rating (122) (212) (302) (392) (482) (572) °F
(-20) (32) (-20)
(122)(32)(212)
(302)
(392)
(482)
(572)
(-20) (32) (-20)
(122)
(212)
(302)
(392)
(482)
(572) °F
(32) (122) (212) (302) (392) (482) (572) °F
= WCB Body Rating
Temperature
= CF8M Body Rating
=
Body body
material
Body
Rating
= 1.0619
rating 1.0619
= Body
material
1.0619
Rating
== PTFE
PTFE
TBody
NOTES
=
Body body
material
Body
Rating
= Body
material
1.4408
Body
Rating
= 1.4408
rating 1.4408
== RPTFE
RPTFE
R
1. DN 200 and 250 (NPS 8 and 10) maximum operation pressure 27.6 bar (400 psig).
=
WCBbody
Body
Rating
filled PTFE
=rating
WCB
Body Rating
= WCB
25%carbon
CARBON
FILLED PTFE Please consult factory for this range of application.
4 == 25%
=
CF8M
Body
Rating
2. DN 125 and 150 (NPS 5 and 6) maximum operation pressure 34.5 bar (500 psig).
filled
PTFE PTFE
= rating
CF8M
Body Rating S == 50%
50%SSS.S
FILLED
= CF8M
body
3. DN 300 (NPS 12) maximum operation pressure 20.7 bar (300 psig).
T = PTFET = PTFE
UHMWP
U == UHMWP
R = RPTFE
R = RPTFE
PEEK(ARLON
(450G)1330)
K == PEEK
50% SS filled PTFE and 25% carbon filled PTFE shall not exceed this rating line for
FILLED PTFE
4 = 25% 4CARBON
= 25% CARBON
FILLED H
PTFE
== TFM
TFM1600
1600
ASME Class 300.
S = 50% SS.S= FILLED
50% S.SPTFE
FILLED PTFE
U = UHMWP
U = UHMWP
K = PEEKK(450G)
= PEEK (450G)
H = TFM 1600
H = TFM 1600
Temperature
34
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
F190/F190F - PRESSURE/TEMPERATURE CHARTS
1200
82.7
1200
82.7
82.7
1000
68.9
41.4
27.5
13.8
27.5
PN441.4
0
PN40
P N4 0
P N4 0
27.5
PN25
PN25
U
PN25
PN25
R
T
T
4K
PN
PN16
13.8 16
PN10 PN16PN10 PN16
PN10
H
S
T
600
PN16
PN10 PN16
PN10400
R 13.8
U
H
4
PN25
PN25600
800 R
55.1
H
4
400
27.5
K
27.5
PN4200
0
P N4 0
27.5
U
PN25
PN25
R
T
S
82.7
82.7
1200
27.5
13.8
1000
P N4 0
PN40R
27.5
U
H
PN25
T
PN25
U
H
PN25
PN25600
S
K
4
4(14)
PN16
PN10 PN16PN10 PN16
PN10
PN10
-10
(14)
U
S T
PN
13.8 16
-10
H
T
600
55.1
S
400
K
= WCB body rating
= CF8M body rating
T
R
4
S
U
K
H
T
R
4
S
U
K
H
27.5
T
PN227.5
5
PN25
50
100 150 200 250 300 °C
°F
13.8
200
200 (302) (392) 13.8
(122) (212)
(482) (572)
PN10
PN10
Note 1
P N4 0
R
PN25
PN25
T4
PN16
PNP
10N16
PN10
R
4
S
27.5
-10
(14)
P N4 0
600
800
PN
Note225
PN25
T
3
PN1Note
0
PN10400
S
-10
(14)
PN16
PN16
1000
PN40
600
13.8
H
Temperature
= 1.4408 body rating
41.4
400
200
1200
800
1000
55.1
P N4 0
1000
55.1
PN441.4
PN40
0
K
41.4
4
°C 300 °C
50
-10 100 50 150100200150250200300250
°F (572) °F
(122)
(14) (212)
(122)
(302)
(212)
(392)
(302)
(482)
(392)
(572)
(482)
= 1.0619 body rating
400
1200
1200
600
R
800
PN16
PN10 PN16
PN10400
13.8
R
200
S
-10
50
100 150 200 250 300 °C
200 (302) (392) (482) (572) °F
(14) S 200
(122) (212)
68.9
Pressure in bar
PN40
68.9
PN40
PN40800
PN441.4
0
PN25
PN25
1000
Pressure in psi
Pressure in bar
41.4
4
K
82.7
800
68.9
27.5
K
F190/F190F - DIN
SPLIT-BODY FLANGED BALL VALVE
1000
68.9
DN 125 to DN 300 (NPS 5 to NPS 12) - full bore
1200
55.1
400
H
82.7
1200
55.1
55.1
T
600
PN16
PN10 PN16
PN10400
4K
800 R
Temperature
F190/F190F - DIN
SPLIT-BODY FLANGED BALL VALVE
68.9
DN 80 to DN 100 (NPS 3 to NPS 4) - full bore
41.4
H
T
PN25
PN25600
U
°C 300 °C
50
-10 10050 150100200150250200300250
°F (572) °F
(122)
(14) (212)
(122)
(302)
(212)
(392)
(302)
(482)
(392)
(572)
(482)
-10
(14)
82.7
68.9
13.8
4
Temperature
82.7
R
U
H
PN16
N16PN10 PN16
PN10
PN10
PN10
°C 300 °C
50
-10 10050 150100200150250200300250
°F (572) °F
(122)
(14) (212)
(122)
(302)
(212)
(392)
(302)
(482)
(392)
(572)
(482)
-10
(14)
400
-10
50
100 150 200 250 300 °C
P
°FN16
13.8
200 (302) (392) 13.8
(14) S 200
(122) (212)
(482) (572)
P
PN10
600
PN40800
55.1
PN25
PN25
1000
41.4 PN40
K PN 41.4 PN
41.4
40
40
S
800
1000
600
U
1200
55.1
68.9
PN40
PN40800
55.1
68.9
Pressure in bar
55.1
Pressure in bar
41.4
1000
Pressure in psi
68.9
1200
800
55.1
1000
Pressure in psi
1200
82.7
1200
R 800
4
600
PN16
PN16
400
Pressure in psi
82.7
82.7
F190/F190F - DIN
SPLIT-BODY FLANGED BALL VALVE
1000
68.9
DN 25 to DN 65 (NPS 1 to NPS 2½) - full bore
F190/F190F - DIN
SPLIT-BODY FLANGED BALL VALVE
68.9
DN 15 to DN 20 (NPS ½ to NPS ¾) - full bore
400
S
200
H
50
100 150 200 250 300 °C
200
200 (302) (392) (482) (572) °F
(122) (212)
H
°C 300 °C
50
-10 100 50 150100200150250200300250
°F (572) °F
(122)
(14) (212)
(122)
(302)
(212)
(392)
(302)
(482)
(392)
(572)
(482)
Temperature
T
R
4
S
U
K
H
= PTFE
= RPTFE
= 25% carbon filled PTFE
= 50% SS filled PTFE
= UHMWP
NOTES
1. DN 200 and 250 (NPS 8 and 10) maximum operation pressure 27.6 bar (400 psig).
Please consult factory for this range of application.
2. DN 125 and 150 (NPS 5 and 6) maximum operation pressure 34.5 bar (500 psig).
3. DN 300 (NPS 12) maximum operation pressure 20.7 bar (300 psig).
= PEEK (ARLON 1330)
= TFM 1600
35
36