CHEMICAL
WATER
TREATMENT
DESALINATION
Recent changes in SA Water’s trade waste agreements requires some dischargers to
electronically monitor their trade waste discharge on a continuous basis. The collected
data will be used to assess ongoing compliance with discharge conditions as set by the
trade waste permit. It is now more important than ever to ensure you have an accurate,
robust and compliant system to avoid any unnecessary penalties.
Requirements comparison
SA Water Requirements
SAMPAN
Other
models
Minimum 24hrs of web-based
graphical and real time data
PRETREATMENT
& FILTRATION
WASTE WATER
NSW SA QLD
VIC ACT TAS WA
U1/30 Pambula St
Regency Park
SA 5010
Ph 08 8345 1111
Built in software capable of
exporting historical raw data in
generic format (e.g. CSV file)
Runs directly from your web
browser and sends alarms
automatically to email, SMS or
FTP server
Historical data stored for up to
2 years online and/or with USB
mass storage device
Support for up to 10 digital and
6 analog sensor inputs
Typical parameters monitored
are conductivity, pH, flow rate/
volume, turbidity, temperature
Rugged design and reliable
operation in virtually any
environment avoiding failure of
equipment in service
Single parameter probes
located in unique proportional
sampling device representative
of trade waste discharge to
sewer
Sensors selected for specific
wastewater types & conditions
Above ground sampling and
analysis improves access for
cleaning sensors, calibration
and maintenance
Easy configuration – The dEX is an intuitive graphical
interface and its configuration editor allows viewing, editing
and saving logger configurations in Windows Explorer style
interface
Real-time monitoring –dEX displays sensor measurements,
calculations and diagnostic information using mimics,
tables and trend charts
Data retrieval – dEX allows retrieval of data at the
click of a mouse button
The Benefits
Internet Access
Real Time and
History /CSV File
3G Network
» Built-in software - no
application to install
Alarms
SMS &
Email
Data Recorder
& Storage
System
» Runs directly from your
web browser
» Accessible by Ethernet or
integrated modem
USB
» Intuitive graphical interface
Conductivity
pH
RTD Sensor
» Easy-to-use configuration
editor
CHEMICAL
WATER
TREATMENT
» Access live and historical
data
Flow Meter
Thermowell
Conductivity
Cell
pH
Electrode
Turbidity
Other
» View data as charts, mimics
and tables
Fig 1: Sample configuration
DESALINATION
PRETREATMENT
& FILTRATION
WASTE WATER
The “heart” of the integra INT SAMPAN system is the Data Taker intelligent data logger which is a
low powered logging platform with an integrated cellular modem. The unit has support for up to 10
digital and 6 Analog sensor inputs and a rugged design with a wide operating temperature range
giving reliable operation in almost any environment. The Data Taker balance of performance and
low power will allow the use of a small solar panel (optional) without com-promising on
functionality. The data logger provides automatic data transfer to email or FTP server.
It has built-in software with no application to install and runs directly from your web browser.
It has an intuitive graphical interface (see fig 2 & 3) with access to live and historical data which can
be viewed as charts, mimics and tables (eg CSV/ MS excel files).
The INT SAMPAN system features a Sampling /Analyzer/Recorder package.
The data collection and recording transmitter is connected to a conductivity module, a RTD
temperature sensor, a pH electrode , turbidity and a magnetic flow meter as well as other 4-20mA
devices. Optional equipment for sampling including peristaltic sampling pump, inlet screen, sample
probe sensor tank and return system assembly.
What is dEX?
dEX is an intuitive graphical interface that
allows you to configure your data logger, view
real-time data in mimics, trend charts or tables
and retrieve your historical data for analysis.
dEX runs directly from your web browser and
can be accessed either locally or remotely,
anywhere that a TCP/IP connection is available
including worldwide over the Internet.
Fig 2: Real-time online monitoring
NSW SA QLD
VIC ACT TAS WA
U1/30 Pambula St
Regency Park
SA 5010
Ph 08 8345 1111
For further information contact one of our sales and service personnel for a onsite evaluation
and system audit. Adelaide Office 08 8345 1111 or [email protected]