CUSTOMER-ORIENTED
“ Customer suggestions, complains or any other feedback is
given the highest consideration.”
UNIQUE SOLUTION FOR OPTICAL
COMMUNICATION NETWORK
At Samsung we are committed to continuously advancing technology in fixed and
mobile networks. Our in-depth understanding of future directions enables us to
provide optimized network solutions that help carriers adapt to today's challenging
network economics, with diverging ARPU and usage curves. It also ensures that
we can offer fast development cycles and bring new technologies and solutions to
market more rapidly, providing the most reliable performance, compatibility, and
cost-effective longevity for the full range of applications.
• Cell Site Interconnectivity Solution
• Air Blown Cabling Solution
• Indoor Micro Cable Solution
• FTTH Solution
Cell Site
Interconnectivity
Solution
As smartphone penetration continues
to climb in today’s global mobile telecommunications networks, carriers must
invest in 3G capacity upgrades and 4G
deployments. They need to find reliable
and cost-effective solutions that support
high-efficiency signal transmission in
conjunction with CAPEX/OPEX savings.
Samsung's Cell Site interconnectivity
solution dramatically simplifies
and reduces the cost of upgrade or
replacement of traditional base station
configurations with the latest distributed
base station architectures.
30
Air Blown Cabling
Solution
Indoor Micro Cable
Solution
In general cable pulling installation,
friction force between optical cable
sheath and duct wall causes increase of
pulling force exponentially and results in
cable failure due to overwhelmed pulling
force.
Especially in bending points, very high
friction forces which dramatically
decrease the installation distance.
Alternatively air blowing installation, there
is a plenty of air originated by compressor
or other equipment which makes the
cable float in the duct and reduces friction
forces between two materials, which
results in longer installation distance.
Today, in living unit residents, both
owners and renters, desire FTTH service,
because FTTH clearly adds value to a
property. Yet it's been slow in coming
to older properties because of concerns
about cost, disruption and aesthetics.
Samsung has developed a better solution
to deploy fiber in living units to respond
to several of the deficiencies of traditional
deployment methods. This new solution
makes FTTH deployment in living units
fast, easy and low-cost. Above all, this
new solution is virtually invisible, greatly
reducing or eliminating the visual impact
of installed fiber.
FTTH Solution
As fiber optic technology becomes more
advanced-and its benefits more widely
known-the range of application areas
using that technology is growing rapidly.
As a global technology leader, Samsung
has a great deal of experience in many
projects and offers a suite of solutions
for Fiber-To-The-Home Service. Being
assigned to work closely with customers
and suppliers to continuously develop
the most innovative products and provide
our customers with the best FTTH
solutions for the next generation of optical
communication networks.
31
Cell Site
Interconnectivity
Solution
FTTA/PTTA Solution |
Fiber/Power To The Antenna
We have two ways to provide the solution for FTTA/PTTA: a discrete cable being used to feed
single RRH and trunk cable for multiple RRHs solution. The main advantage of our FTTA/
PTTA solution is the ease of installation meaning that it is a space-saving, lightweight, and
compactness.
DC1|
FLUIDIC CONNECTION
BETWEEN RRH AND DU WITH ONE-STOP SOLUTION
The incessant demand for increased wireless network capacity and service reliability
has driven the replacement of coaxial cabling to fiber-based architectures. Firstgeneration architectures use discrete fiber and power cables installed separately on
the tower, the main benefit of this solution is that this is the simplest technology. Unlike
discrete cabling, trunk and hybrid cabling methods involve break-out points on the
tower where individual fibers and power conductors split out from the cable to connect
to each individual RRH. Especially the hybrid fiber-power cables can provide greater
flexibility for future enhancements while potentially lowering capital expenditure and
labor costs over time.
Discrete Cable Solution
RRH
Samsung's Discrete Cable Solution is single runs of fiber and power cable pairs directly from the
DU to each RRH, it could be said that this installation method is the simplest. In many RRH network
structures, the vast majority of RRHs have been supplied with discrete cables. It can be delivered as
a pre-installed solution for easy connections between the DU and RRHs.
Termination
Optical Cable
OPTICAL CABLE
• Up to 8 fibers
• Available in superior bend performance fiber (Samsung's Ultra BendfreeTM)
• Weather resistance (IP rating)
• High crush and UV resistance
POWER CABLE
DU
• Weather resistance (IP rating)
• High crush and UV resistance
• IEC / UL Compliant
RRH connection part
Power Cable
Antenna
Antenna
Remote
Radio Head
Remote
Radio Head
Optical Cable
Optical Cable
Power Cable
Distribution
Enclosure
TC1|
DU connection part
Trunk Cable Solution
RRH
Termination
Samsung's Trunk Cable Solution covers multiple RRHs; it split into multiple cables at robust
distribution points. It is eliminating the need for multiple cable runs and reducing weight and wind
load burdens while reducing tower leasing costs.
DISTRIBUTION POINT
Hybrid Cable (Power+Optic)
Power Cable
Distribution Point
CABLE CONSTRUCTION
• High mechanical strength against impact
• 1 feeder and multiple distribution cables
• Weather resistance (IP rating)
Sheath
AL conduit
Inner jacket
Steel wire
Optical fibers
Cable sheath
Sheath
Filler
Conductor
Insulation
Wrapping film
Optical Cable
Power Cable
DU
Optical Cable
Power Cable
RRH CONNECTION
Various types of commercial connectors are available upon your request (IP connector, etc.)
Digital
Unit
FTTA/PTTA Solution
32
Digital
Unit
HTTA Solution
OPTICAL CONNECTOR
POWER CONNECTOR
33
HTTA Solution |
R1|
Hybrid (Optic/Power) To The Antenna
Samsung HTTA Solution dramatically simplifies and reduces the cost of upgrade or replacement
of traditional base station configurations with the latest distributed base station architectures.
It provides a fluid interconnection from the Digital Unit (DU) cabinet to the Remote Radio Head
(RRH) with a factory assembled end-to-end solution of optical and fiber cables and a distribution
enclosure. It helps you lower the effort and cost of installation with minimal impact at the tower.
A1|
Type R1 is designed to provide maximum flexibility at installation, ongoing expandability and
reliability long after installation is completed. You can simply connect more jumper cables from the
saved Hybrid sockets to additional RRHs later as capacity growth dictates.
JUMPER CABLE
• Optic and Power Connection from the Distribution Enclosure to RRHs
• Easily add/install jumper cables for a future expansion
• Factory-assembled cables for a fast on-site installation
• F lexibility with small bending radius and excellent cable routing
properties
• Equipped with customer specific power and fiber-optic connectors
All-in-One body type
Type A1 is the most efficient RRH connection solution in terms of ease of installation, cost and
limited space on the mast. To simplify installations, whole solution from DU to RRH connection part is
preconnected all-in-one including distribution enclosure seamlessly.
It is a true PLUG & PLAY.
Weather
proof type
connector
Optical Fiber
Connectors
Power
Connector
Y-branch
Frame
Ground
DISTRIBUTION ENCLOSURE
• R
uggedized and robust architecture
Weather Proof (Option: IP rating)
• Available Hybrid connector (water and dust protection)
• Designed to cover up to 4 RRHs (more RRHs on request)
•O
ne Touch Connection between jumper and the distribution enclosure
(No need to open it for repair or replacement, just plug the jumper cables)
• Easy mount with included hardware
JUMPER CABLE
• Optic and Power Connection from the Distribution Enclosure to RRHs
• Pre-installed in distribution enclosure for simple and fast installation
• Factory-assembled cables for a fast on-site installation
• Flexibility with small bending radius and excellent cable routing
properties
• Equipped with customer specific power and fiber-optic connectors
• Available with weather proof type connectors (Optical, Power)
Replaceable body type
or
Optical
Fiber
Connectors
Hybrid
Connectors
Power
Connectors
HYBRID FEEDER CABLE
DISTRIBUTION ENCLOSURE
• Combine fiber/power cables into one hybrid cable for lighter burden
• Pre-fabricated cable covers up to 4 RRHs (more RRHs on request)
•H
arsh environments protection (e.g. Birds, Rodents, Weather, etc.)
Option: corrugated aluminum armor
• Cable cut to site length
Jumper
Cable
• Ruggedized and robust architecture
Weather Proof (Option: IP rating)
• Jumper cables and feeder cables are pre-connected to distribution
enclosure for the efficient installation
• Designed to cover up to 4 RRHs (more RRHs on request)
Distribution
Enclosure
Power
Optic
HYBRID FEEDER CABLE
• Combine fiber/power cables into one hybrid cable for lighter burden
• Pre-fabricated cable covers up to 4 RRHs (more RRHs on request)
• Harsh environments protection (e.g. Birds, Rodents, Weather, etc.)
Option: corrugated aluminum armor
• Cable cut to site length
Power
Optic
REMOTE RADIO HEAD (RRH) CONNECTION
• Jumper cables are connected to RRHs, which are terminated with
RRH compatible interfaces
RRH
Optical
Cable
DIGITAL UNIT (DU) CONNECTION
Power
Cable
Power
• Pre-connectorized hybrid feeder cable compatible with customer
specific DU interfaces in protective cabinets
• Passive components packages for DU connection are available
(e.g. Optical distribution frame, Ground Kits, Inspection kits, etc.)
Optic
34
* Drawings are not to scale
* Specifications can be customized upon request
35
Air Blown Cabling Solution
MOST ADVANCED AND COST EFFECTIVE SOLUTION
Samsung’s Air Blown Cabling Solution enables quick and easy incremental installation of cables by air blowing.
It provides a lower initial investment and the flexibility to install and upgrade to the latest fiber technologies after the
initial installation. The Samsung's Air Blown Cabling Solution consists of FastBlowTM Air Blown Micro Cables, Micro
ducts and Components.
FastBlow
TM
Samsung's FastBlow using 250 μm coated fiber is lightweight with small diameter and designed
to be blown into a micro duct by air-blown installation. The lightweight, flexible design of cable can
also save time and costs with fast and easy installation. It also helps service providers to reduce their
initial network build investment by deploying fiber only as needed to meet demand.
TM
• Up to 288 fibers
• Easy and rapid installation no needs to open sidewalks
• Range of cable designs and sizes to suit a variety of duct size
• Robust for handling in the field and easy access and breakout of fibers
• Compactness: Small diameter, light weight cables
Mechanical Performance
Fiber count
Air Blown Micro Cable
Micro Duct
HIGH-PERFORMANCE
Component
FIELD PROVEN
Our unique design provides and
highly reliable blowing performance
and this lightweight cable offers
durability and flexibility
We are dedicated to provide second
to none products to our customers
and our sophisticated quality
management system ensures that
we can make 'Zero Defect ‘products
COST-EFFECTIVE
Our solution also helps service
providers to reduce initial investment
and flexibility to install and upgrade
to the latest fiber technologies after
the initial installation
FastBlow Air Blown Micro Cable
TM
Samsung's FastBlow Air Blown Micro Cables are ultra-lightweight with small diameter and
designed for metro feeder or access network to be blown into a micro duct by air-blown
installation. As the cable allows the deployment of currently required fiber count, the micro
cables provide a lower initial investment and the flexibility to install and upgrade to the latest
fiber technologies after the initial installation.
TM
EASE OF HANDLING
It allows ease of handling and installation, as it provides significantly
reduced dimension and light weight cable design be installed in each
micro duct
12 ~ 72
84 ~ 96
Fibers per tube
12
12
12
24
24
12
24
Nominal outer diameter (mm)
5.6
6.5
8.6
7.9
9.4
11.1
12.4






Gel-filled buffer tube
Colored optical fiber
Dielectric central member
Water swellable yarn
Rip cord
Outer PE jacket
192
288
Nominal cable weight (kg/km)
27
36
64
50
72
99
121
Maximum tensile strength (N)
500
700
1,000
1,000
1,000
1,000
1,000
Maximum crush resistance (N/10 cm)
500
500
500
500
500
500
500
FastBlow+
Optical Performance
TM
(with 200 μm coated fiber)
NEW DESIGN CABLE WITH 200 MICRON FIBERS FOR BEST PERFORMANCE
Samsung's FastBlow+ is applied with 200 μm coated fiber instead of the more standard 250 μm.
The 200 μm coated fibers require 36 percent less space than conventional 250 μm coated fibers,
enabling reduced diameter cables with a higher fiber count per tube. It can potentially reduce fiber
optic network build costs by increasing installation distance, reducing the number of installations,
and maximizing the use of congested and limited availability ducts.
TM
• Up to 288 fibers
• Higher-density cable for cost-effectiveness
• Smaller diameter with 200 μm coated fiber compared to conventional fibers
• Light weight for easy to handle to provide longer blowing distances
• More cables can be deployed in a given duct
Wavelength (nm)
1310
1550
Attenuation (dB)
Max. 0.35
Max. 0.22
* Samsung WidepassTM Compliant (ITU-T G.652.D)
Environmental Performance
• Minimum bending radius
- Short term: 15 * Outer diameter
- Long term: 10 * Outer diameter
• Temperature
- Operation: -20˚C to +70˚C
- Storage / Transport : -30˚C to +70˚C
- Installation: -10˚C to +50˚C
* Tested in accordance with IEC 60794-1
Mechanical Performance
Fiber count
144
192
Note
12 ~ 72
84 ~ 96
Fibers per tube
12
12
12
24
24
12
24
288
10.7
Nominal outer diameter (mm)
5.2
6.0
7.9
6.9
8.0
10.4
Nominal cable weight (kg/km)
22
32
56
40
53
88
96
Maximum tensile strength (N)
500
500
1,000
1,000
1,000
1,000
1,000
Maximum crush resistance (N/10 cm)
500
500
500
500
500
500
500
• Fiber colors by IEC60304 - Blue /
Orange / Green / Brown / Grey / White /
Red / Black / Yellow / Violet / Pink / Aqua
• Diameter represents a nominal value and
may vary by ±5%
• Sheath marking legend - hot foil stamp
(indented)
Ex) Manufacturing year (ex. 2013) Samsung RM
SM 24 = length marking =
Using 250 μm coated fiber
Using
EFFICIENT USE OF DUCT
92 Fibers
144
200 μm coated fiber
It allows to improve the density of cable in limited duct space, as it
designed to significantly save the dimension and ultra-lightweight
Save over
IMPROVED BLOWING PERFORMANCE
It designed to decrease the friction force between cable and duct wall
for optimum blowing performance
30
%
192 Fibers
* Drawings are not to scale
192 Fibers
36
37
Micro Duct
DI (Direct Install)
INDOOR MICRO CABLE SOLUTION
Samsung’s Micro duct is small size, light weight with low friction performance suitable for
micro cable and fiber blowing. It can be installed in narrow duct space of existing buildings
and we can provide various types of ducts.
• Various types of micro duct
- Thick walled, Direct Buried, Direct Bury Reinforced, Direct Installed, Low smoke Zero Halogen, Aerial, etc.
- 1, 2, 4, 7, 12, 19, 24 distribution
SAMSUNG OFFERS INNOVATIVE SOLUTION FOR FTTH DEVELOPMENT
INVISIA is an innovative micro drop cable solution that allows service providers to bring FTTH service to existing living
units/offices in a faster and easier fashion. INVISIA reduces a carrier's installation costs and minimizes the disruption
and aesthetic dissatisfaction often associated with retrofitting service cables in existing living units.
TM
• Duct size: Suitable for various cable diameters (Out/In)
TM
5.0/3.57.0/3.57.0/5.5 8.0/6.0
10.0/8.012.0/8.012.0/10.014.0/10.0
• Low friction coefficient material
• Low friction treatment
DB (Direct Buried)
INVISIBLE, FAST, SIMPLE.
Outer sheath (MDPE or LSZH)
Aluminium layer
Micro tube
Inner sheath (MDPE)
Outer sheath (HDPE)
Aluminium layer
the ultra bend insensitive fiber and corner clips
Conventional Cable
INVISIA Cable
TM
LSZH
DBR
Thickwalled
Aerial Duct
Component
Edge corner clip
Plate corner clip
Inside corner
Micro Duct Closure
Inside corner
Outside corner
Epoxy glue or Straight clip
Water proof closures are designed for blown fiber tube cable connection applications. A micro duct can
be easily connected and distributed from the closure with the use of the connecting side ports. It is a
direct bury sealed closure designed for intercepting a micro duct assembly to allow multiple spur-offs
to smaller blown fiber tube cables or ducts.
Plate corner clip
• High strength plastic for impact and durability
• Installation: Direct Bury, Aerial, Trench etc.
• Easy maintenance and reassembling
• Dust and water proof
Connector
38
STRAIGHT CONNECTOR
REDUCING CONNECTOR
A connector is a clip-in duct connector used for jointing two
micro ducts. It is transparent to allow a visual inspection of
a micro cable passing through. To enable cable blowing, the
connector is designed to operate at 15 bars without leakage.
Push-fit reducing connectors make micro duct splicing fast
and easy. The reducers can be connected and disconnected
10 times and still maintain the high performance requirements
for air blown installation systems.
ENDCAP
GAS BLOCK
End caps are used to tighten the ends of unused primary tubes
to avoid water and dust from emerging into ducts. They are
also used in combination with the valve end stop connector
during installation of micro ducts into existing cable ducts.
Gas Block Connectors are used when it is necessary to block
moisture (avoiding condensation) or to block gas passing
freely into different micro duct sections. This could be
necessary when changing from outdoor to indoor installation.
INVISIA Cable
TM
• 900 μm round type
• Applying for Samsung Ultra BendfreeTM
• Transparent color
• Hard and Resilient buffer material
• Environmentally and Mechanically stable
Plate corner clip
Edge corner clip
Straight clip
Corner Clip
Epoxy Glue
• Plastic (Flame retardant)
• Double side adhesive tape
• Transparent color
• Grip cable
• Cable can be side in/out
• Natural harden material
• Supporting adhesion of
cable on surface
• Flame retardant
39
INVISIBLE SOLUTION, VISIBLE VALUE
INVISIA consists of a new 900 μm drop cable with Samsung Ultra BendfreeTM (G.657.B3), the most
advanced bend resistant fiber. The translucent cable is easily attached to a variety of wall surfaces using
TM
2 types of simple and discrete corner clips. The pathway management tool kit provided with INVISIA
includes a variety of these clips along with a small tube of specially formulated epoxy which can be
applied at discrete points along the cable or smeared like painters caulk, resulting in a truly invisible
installation that may be painted by the homeowner if desired.
TM
FTTH Solution
VERTICALLY INTEGRATED FTTH SOLUTIONS
Samsung has end to end solutions from Backbone to FTTH applications including passive accessories, enabling
Samsung to provide high quality consistency and efficiency. We also focus on VALUE ENGINEERING providing cost
effective products while allowing for Beyond Value Creation to the customer.
Highly reliable, field proven quality products
Reduce initial costs and control on-going investment
Design and development always in time as per customer's request
Almost everywhere
installation
Virtually invisible installation
INVISIATM is the best solution to fulfill
occupants' expectation with minimum
damages to the interior design
INVISIATM can be installed in various surfaces
of wall such as wood molding, sheet rock,
concrete board, plastic and etc.
Cost innovation
Easy-to-install by one person
INVISIATM provides low maintaining/installation
cost due to pathway management tool kit
with simple and long lasting installation
performance
INVISIATM can be installed faster and easier by
one person using pathway management tool
kit
Guaranteed performance
Eco-friendly
INVISIATM provides high performance with
Ultra Bend-Insensitive fiber and pathway
management tool kit
INVISIATM fully complys with Restriction of
Hazardous Substances Directive ‘RoHS’
What are the recommended installation conditions?
INVISIA can be installed almost EVERYWHERE. With its strong adhesive performances, Corner clips are
able to easily stick to most surfaces including wood, sheetrock, concrete, and plastic while maintaining
its adhesiveness. When looking closely at INVISIA installation, the surfaces and corners are very neat
without any traces of installation since the cables are thin and transparent. Also, no traces can found
either when wallpaper is applied. The cable fits easily inside moldings and can also be neatly installed
down the edges of bookcases or furniture. It is possible to install the cable in various ways.
TM
TM
Would the interior design remain seamless after
the installation?
OPTICAL TERMINATION BOX (OTB)
Samsung's Optical Termination Box (OTB) is mounted to in & out side wall of building or pole to
distribute and connect optical cable for distribution of subscriber. It is designed with controls that
maintain the fiber bending radius throughout the unit on the segregated customer and provider sides.
For convenient cable management, they provide termination, splicing and storage functions for fiber
optic cable systems.
- Engineered fiber routing protects bending radius throughout the unit to ensure signal integrity
- Enough work space for efficient splicing or adaptor patching
- Convenient access for installation, maintenance and subsequent termination
- Customized design product is available upon request
Outdoor Termination Box
(Mid-span branch)
Yes. As the name implies, INVISIA blends into any wall surface (painted or not), making it nearly
unnoticeable to the untrained eye. This solution eliminates the need for drilling and fishing cables
which is often expensive and time consuming for carriers. In addition, INVISIA does not require any
mechanical fasteners which may damage the interior finish of the living unit.
TM
TM
Customer Termination Box
(Optic)
40
Customer Termination Box
(Hybrid_Optic/UTP)
Indoor Termination Box
41
OPTICAL SPLITTER
Single Mode 1×N and 2×N Splitters divided uniformly optical signals from input ports to multiple
outputs. Splitter can also be operated in the reverse direction to combine multiple wavelengths into
one fiber. Splitter is used in distribution equipment like FTTH Ethernet PON (Passive Optical Network)
system.
- Low insertion loss and high reliability compact packaging
- Up to 64 outputs standard
- Available in 1×N and 2×N configurations
- Available with various types (e.g. Without connector, With fanout and connector, Cassette)
With fan-out and connector
FIBER DISTRIBUTION HUB
The Fiber Distribution Hub (FDH) provides everything necessary to manage distribution fibers for
an outside plant FTTH application. FDH can accommodate trays for splitter modules, they provide
termination and storage functions.
Module case-type
Optical Splitter
FIBER SPLICING CLOSURE
Samsung’s Fiber Splicing Closure protects fiber optic splice while providing fast and easy no-cost
reentry. It is installed on wires, in manholes, in ducts, and mounted on poles.
- Dome type, In-line type
In-line type
FIBER DISTRIBUTION FRAME (FDF)
Fiber Distribution Frame (FDF) provides efficient cable connections between
outside plant cable and equipment in the buildings and communication
facilities.
- Drawer type, Swing door type, Panel type
Drawer-type
CABINET RACK
Cabinet Rack is designed for fixing the ODF or other transmission equipment for
providing splicing, distribution andstorage function.
PRE-TERMINATED CABLE
Pre-terminated cable provides easy interconnections in transmission equipment, distribution panels,
equipment and Multi-Dwelling Unit.
- Various type of connectors can be connected upon your request
OPTICAL JUMPER CORD
Samsung provides various types of optical patch cords and pigtails designed to meet the required
specifications for today’s optical communication systems. Based on advanced and highly reliable
technology, Samsung offers diverse solutions for optical connections with basic products such as SC,
LC, FC, ST and its hybrid version.
SC-type
- Various diameter of cable available upon your request (0.9, 2.0, 2.4, 3.0, etc.)
FIELD ASSEMBLY CONNECTOR
Field Assembly Connector can be assembled easily and quickly in the field without the additional
assembling tools.
SC / APC-type
42
- SC/APC type, SC/PC-type