Call Screen (20 numbers max) The screened caller will not be able

Call Screen (20 numbers max)
The screened caller will not be
able to access one's voice mail,
and one's Yak Digital Phone
will not ring when they call.
Call Screen is initially disabled
• Press 1 to enable Call Screen
* 60
Call ID Block
The party called will not see
one's caller ID.
* 67
Call Return
View the last number that
called.
Call Forward disable
After the tone, enter a phone number followed by #
• The number entered will be dialed
Auto dials the number of the last caller
* 69
Call Forward enable
Forward one's calls to an
alternative telephone number.
Once Call Screen is enabled, the options are:
• Press 1 to disable Call Screen
• Press 2 to list all Call Screen numbers
• Press 3 to add a Call Screen number
• Press 4 to delete a Call Screen number
• Press 5 to add the last incoming call to the list
* 72
* 73
Speed Dial menu
#0
After the tone, enter a phone number followed by #
• The number entered will now receive one's calls
Disables Call Forward
Press 1 to add an entry
• Select a number from 1 to 9 to store this entry
• After the tone, enter a number followed by #
Press 2 to review one's entries
Press 3 to delete an entry
Speed Dial
# 1–9
The number stored in the selection will auto dial
• If no number had been stored, one will be given
an option to save a number
Follow Me
Follow Me is initially disabled
• Press 1 to enable Follow Me
Yak Digital Phone exclusive
feature!
Enabling Follow Me means
one's Yak Digital Phone will
ring first, but if no answer, calls
will be routed to the chosen
Follow Me numbers in
sequential order (e.g. mobile,
cottage, and work). If there is
no answer at any of one’s
Follow Me numbers, the call
will then go to one's Yak Digital
Phone Voicemail. Up to three
Follow Me numbers are
permitted.
Toggle Voice Menu Language
Once Follow Me is enabled, one's options are:
• Press 1 to disable Follow Me
• Press 2 to list the Follow Me numbers
• Press 3 to add a Follow Me number
• Press 4 to delete a Follow Me number
* 88
* 96
Set Number of Rings
* 97
Switches voice menu between English and French
Select how long in seconds one desires the Yak
Digital Phone to ring before one's calls go to
Voicemail
The maximum length is 60 seconds, and the
minimum is 5 seconds
Do Not Disturb (DND)
All calls go immediately to
Voicemail when enabled.
Call Waiting
* 99
DND is initially disabled
• Press 1 to enable
Once DND is enabled, press 1 to disable it
N/A
Call waiting is a feature configurable on the device
(ATA, IP Phone, or X-Lite client)
Technical Support
611
Call is routed to Yak Technical Support
Emergency (nomadic)
911
Call is routed to Operator
Voicemail
Please enter one's PIN followed by the pound key
The default PIN is the last four
digits of one's Yak Digital
Phone number.
Press 1 to listen to new messages
• Press 1 to repeat message
• Press 7 to delete message
• Press 9 to save message
• Press 6 to play next message
• Press 4 to play previous message
Remotely dial one's Yak Digital
Phone number, press * when
one hears the greeting, then
follow the prompts.
Please Note: PIN must be
changed to access Voicemail
remotely. One will be
prompted to do so upon first
accessing one’s Voicemail. The
voicemail messages will also
be sent as an email with .wav
file attachment.
Press 2 to listen to saved messages
Press 3 for advanced options
• Press 1 to change one's PIN
* 98
• Press 2 to record one's name
• Press 1 to listen to the recording
• Press 4 to re-record
• Press * to go to the previous menu
• Press 3 to record a greeting
• Press 1 to listen to the current greeting
• Press 2 to record a new greeting
• Press 1 to listen to the recording
• Press 2 to save and set as an active greeting
• Press 4 to re-record
• Press * to go to the previous menu
• Press 4 to edit message review options
• Press 1 to change date review
• One will hear the current state/setting
• Press 1 to change the state (enable/disable)
• Press * to go to the preview menu
• Press 2 to change caller ID review
• One will hear the current state/setting
• Press 1 to change the state (enable/disable)
• Press * to go to the previous menu