Ford Motor Company
SEMA Aftermarket Support Group
20100 Rotunda Dr.
Dearborn, Michigan 48124
Date: May 31, 2017
To:
SEMA Members, Ford Truck Upfitters, Aftermarket Component Manufacturers and
Equipment Installers and NTEA
Subject: 2018MY F-150, 2018MY Mustang and 2018MY Expedition Measuring Session
You are invited to apply to attend a measuring session for the 2018MY F-150, 2018MY
Mustang and 2018MY Expedition on July 13, 2017. At the measuring sessions, attendees
will be allowed to examine pre-production 2018MY vehicles. These vehicles are as
“production representative” as possible and may aid your development process for future
upfits.
The Measuring Sessions will be held at the Ford Product Development Benchmarking
Center, Allen Park, MI from 7AM – 4PM.
Due to the expected number of attendees and the limited number of vehicles, we will need
to limit the use of digital measuring devices (for interior or exterior scanning). If you need to
perform digital scanning, contact the Ford Aftermarket Support Group at
[email protected] for special arrangements.
You must complete and return (email to [email protected]) the attached application form
by no later than June 9. A confirmation letter with map will be e-mailed to you by June 23.
Session will be filled on a first-come, first-served basis.
SEMA members should direct any questions with regards to this event to Sherry Kollien via
e-mail: [email protected].
Commercial Truck Upfitters should direct questions or special needs to Ford Truck Body
Builders Advisory Service via e-mail: [email protected] or phone: 877-840-4338.
Sincerely,
Aftermarket Support Group
2018MY F-150, Mustang & Expedition Measuring Session
Complete this application form and return for attendance to the measuring sessions
by no later than June 9, 2017. The session will be held at the Ford Product
Development Benchmarking Center, Allen Park, MI on July 13, 2017. Limit two persons
per company.
Company: ______________________________________________________
Name of Attendee(s):_______________________________________________
________________________________________________
Address: ________________________________________________________
City/State/Zip Code: _______________________________________________
Phone: __________________________________________________________
Fax: ____________________________________________________________
E-Mail: __________________________________________________________
Ford Motor Company reserves the right to decline attendance. Photo ID will be
required for entry. All image capturing devices are prohibited if images are required
arrangements can be made on site with Ford staff.
OPTIONAL - Please submit questions you would like information on:
Please return form to: [email protected]
Please be reminded:
All information obtained during this event including, but not limited to: Program
Content/Direction, Key Hardpoints & Dimensions, Drawings/Files (including) scanned or
CAD generated data and photographic/video material is covered by a confidential
disclosure agreement that obligates the attendee to protect this information, prevent
unauthorized use, dissemination or publication (including social media). Please reference
the confidential disclosure agreement for the complete list of terms and conditions. (CDA
must be signed upon entry to event)