MH 201, 203, 205
Classroom Technology
University of Dayton Information Technology
Classroom Support
Data Projector Controls
MUTE
POWER
Press “PROJ. ON” to
power on projector. Press
“PROJ. OFF” to Power
off projector
Pressing “AUDIO
MUTE” turns off the
sound until pressed
again. Pressing
“PROJ. MUTE”
blanks the display
until pressed again
Audio
Press the ▲ to
increase volume.
Press ▼ to
decrease volume.
The more LEDs lit,
the louder the volume
Source Select
Select what SOURCE (1 -8) to display. Green
LED light signifies what SOURCE is selected
DVD / VHS / CATV Controls
Cable
•In VCR MODE
ONLY select
“Channel UP” or
“Channel Down” to
change cable channels
DVD Menu
Use directional
buttons ▲►▼◄ to
navigate through DVD
menus
DVD Menu
Source Select
Make sure to select the proper input first
(DVD/VCR) to display to the projector
DVD/VHS Player can be found below podium
Source Control
Select VCR or DVD in order to send the
correct commands to the DVD/VCR.
Select MENU to bring
up the DVD main menu.
Select ENTER to
commit a selection on
the DVD’s menu
Additional Input
USB ports are
connected to the
podium PC
Data port for
hardline internet
connection
Additional VGA input can be used to connect a laptop. Make sure to select
the appropriate source (Laptop) on the control panel to display to the
projector.
For assistance please contact
Technology Support Services at
229-3888.
Document Camera
POWER
Press grey
power
button
LIGHT
• Move switch to left to
light subject
• Move switch to right to
turn off light
LED Color Indicates Status
ZOOM +/Press to increase or
decrease image of
subject
GREEN
Normal
RED
Standby
Press power
button to activate
ORANGE
Incorrect
input
Switch input from
TV to VGA or
contact support
for assistance
AUTO FOCUS
Press and lens automatically
adjusts for best image of
subject
PC Login
Login with your UD
Novell username in
password. If Novell is
down you can click on
“Computer Only Login”
and use the username:
faculty and password:
(none, leave blank)
Classrooms Are Shared Spaces
So please…
• Do not store sensitive data on Classroom PCs
• Log off of Classroom PCs after use (Do not shut
down)
• Power off projector(s)
• Remember any flash drives, belongings
For assistance please contact
Technology Support Services at
229-3888.