A/V over IP Extenders
Extend and Distribute Audio/Video
Signals to Any Analog or Digital Display
Tripp Lite’s A/V over IP extenders convert audio/video
signals to IP-based signals that can be transmitted to
and distributed through a dedicated Ethernet network
switch. Multiple sources can connect to multiple displays
in a single installation with the capability to mix and
match analog and digital technologies. The signals are
carried over Cat5e/6 cable up to 328 ft. (100 m) from
the transmitter to the switch and another 328 ft. from
the switch to the receiver.
Flexibility
• A/V signals from any source, analog or digital, can be received by any analog or digital display
• New components can be seamlessly integrated into
your installation
Model: B160-101-HDSI
Manageability
Transmit Any Input to Any Output
Analog Input (Component, VGA)
or
Analog Output
Digital Output
• Designed for dedicated managed Ethernet network switches with Internet Group Management
Protocol (IGMP)
• Sources can be assigned to displays manually or with
the managed switch interface
Scalability
• Multiple managed switches can be cascaded with up to 328 ft. between switches, increasing the number of connected devices and extending the maximum distance between transmitters and receivers
• Support for up to 64 transmitters and 255 receivers in a single managed switch installation
Versatility
®
Digital Input (DisplayPort , HDMI , DVI)
™
or
• Compatible with an unmanaged switch with up to
two transmitters and the number of receivers limited
to remaining switch ports
• Without a switch, transmitter can be connected to
a receiver up to 328 ft. away
Additional Functionality
Analog Output
Digital Output
• Capability to transmit RS-232 serial and IR
control signals
• HDMI output on transmitters for a local monitor
See other side for Tripp Lite A/V over IP Extenders.
Transmitter
Transmitter
Blu-ray Disc™ Player
Transmitter
DVD Player
Transmitter
PC
Max. Resolution
1920 x 1440*
1920 x 1440*
1920 x 1440*
1920 x 1440*
** Supports 1080i only; does not support 1080p.
A/V over IP Receivers
Model
Technology
B160-100-CSI
Component
B160-100-DPSI
DisplayPort
B160-100-HDSI
HDMI
B160-200-HSI
HDMI (2 Ports)
B160-100-VSI
VGA with Audio
Max. Resolution
1920 x 1080**
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1440
© 2017 Tripp Lite. All trademarks are the property of their respective owners. Photos may differ slightly from actual products. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice.
See Tripp Lite’s full line of digital signage solutions at www.tripplite.com.
* Limited to max. resolution of the receiver.
A/V over IP Transmitters
Model
Technology
B160-001-CSI
Component
B160-001-DPSI
DisplayPort
B160-001-HDSI
HDMI/DVI
B160-001-VSI
VGA with Audio
17-01-141 95-34A2
1111 W. 35th Street, Chicago, IL 60609 773.869.1234
A/V over IP Extender Kits (Transmitter and Receiver)
Model
Technology
Max. Resolution
B160-101-DPSI
DisplayPort
1920 x 1080
B160-101-HDSI
HDMI/DVI
1920 x 1080
B160-201-HSI
HDMI (2 Ports)
1920 x 1080
Supports up to 64 Transmitters and 255 Receivers Using Cascading Managed Switches
Receivers
Up to
328 ft.
16-Port Managed
Ethernet Switch
with IGMP
Up to
328 ft.
Blu-ray Disc™ Player
A/V Distribution with over IP Extenders and Managed Ethernet Switch