Crestron without stand-alone DVD/Bluray player
**DO NOT unplug cables. DO NOT change input of projector**
**Call ITS Helpdesk x5999 (352-395-5999) to report problems**
Step 1: Turn on the PC - log in with room number (i.e. B001)
Step 2: Turn on the document camera
Step 3: Turn on the projector (input always set to HDMI)
Step 4: Turn on and set Crestron touch screen panel to the desired setting:
Select Input Source:
To Use Computer:
Press the Projector
Source button
Press the desired source button
Button will show
Computer
To Use Doc Cam:
To Use Laptop VGA: To Use Laptop HDMI:
To Use AirMedia:
Select Input Source:
Button will show
Doc Cam
Button will show
Laptop VGA
Button will show
Laptop HDMI
Button will show
AirMedia
If projector does not display the PC, press and hold Window key + P and set to Duplicate:
Crestron with stand-alone DVD/Bluray player
**DO NOT unplug cables. DO NOT change input of projector**
**Call ITS Helpdesk x5999 (352-395-5999) to report problems**
Step 1: Turn on the PC - log in with room number (i.e. B001)
Step 2: Turn on the document camera
Step 3: Turn on the projector (input always set to HDMI)
Step 4: Turn on and set Crestron touch screen panel to the desired setting:
Select Input Source: Select Input Source:
To Use Computer:
To Use Doc Cam:
Press the Projector
Source button
Press the desired
source button
Button will show
Computer
Button will show
Doc Cam
To Use Laptop VGA:
To Use Laptop
HDMI:
To Use AirMedia:
To Use DVD/ Bluray:
Button will show
AirMedia
Button will show
DVD / Bluray
Button will show
Laptop VGA
Button will show
Laptop HDMI
If projector does not display the PC, press and hold Window key + P and set to Duplicate:
SMARTCART INSTRUCTIONS - ECAM
**DO NOT unplug cables. DO NOT change input of projector**
**Call ITS Helpdesk x5999 (352-395-5999) to report problems**
Step 1: Turn on the PC - log in with room number (i.e. B001)
Step 2: Turn on the document camera
Step 3: Turn on the projector (input always set to VGA1 or Computer1)
Step 4: Set document camera to desired setting:
To Use Doc Cam:
To Use Computer:
**This is the default setting**
(Button will be GREEN)
Press SOURCE button on DocCam
To Use Laptop:
To Use DVD Player:
Press SOURCE button on DocCam
Press SOURCE button on DocCam
(Until Button is BLUE)
(Until Button is YELLOW)
(Until Button is RED)
If projector does not display the PC, press and hold window key + P and set to Duplicate:
SMARTCART INSTRUCTIONS – QOMO with HDMI
**DO NOT unplug cables. DO NOT change input of projector**
**Call ITS Helpdesk x5999 (352-395-5999) to report problems**
Step 1: Turn on the PC - log in with room number (i.e. B001)
Step 2: Turn on the document camera
Step 3: Turn on the projector (input always set to VGA1 or Computer1)
Step 4: Set document camera to desired setting:
To Use Doc Cam (Qomo):
To Use Computer:
**This is the default setting**
(Button will be BLUE)
Press HDMI/VIDEO button on DocCam
(Until Button is BLUE)
To Use Laptop:
To Use DVD Player:
Press CAM/PC1/PC2 button on DocCam
Press HDMI/VIDEO button on DocCam
(Until Button is RED)
(Until Button is GREEN)
If projector does not display the PC, press and hold window key + P and set to Duplicate:
SMARTCART INSTRUCTIONS – QOMO without HDMI
**DO NOT unplug cables. DO NOT change input of projector**
**Call ITS Helpdesk x5999 (352-395-5999) to report problems**
Step 1: Turn on the PC - log in with room number (i.e. B001)
Step 2: Turn on the document camera
Step 3: Turn on the projector (input always set to VGA1 or Computer1)
Step 4: Set document camera to desired setting:
To Use Doc Cam (Qomo):
To Use Computer:
**This is the default setting**
(Button will be BLUE)
Press CAM/PC1/PC2 button on DocCam
(Until Button is GREEN)
To Use Laptop:
To Use DVD Player:
Press CAM/PC1/PC2 button on DocCam
Press S-VIDEO/VIDEO button on DocCam
(Until Button is RED)
(Until Button is GREEN)
If projector does not display the PC, press and hold window key + P and set to Duplicate: