zenithinteriors.com
Round
MELBOURNE SYDNEY CANBERRA BRISBANE PERTH ADELAIDE AUCKLAND WELLINGTON SHANGHAI
zenithinteriors.com
HONG KONG
Round
The items are distinctive and innovative, but never intrusive. Designed using advanced technology, they are
also exceptionally functional and remarkably resistant.
ROUND CHAIR, ARMCHAIR, LOUNGE CHAIR, STOOL,
TABLE & SUN LOUNGER
FEATURES
The Round Collection focuses on rounded lines for extremely comfortable
seats while the tables are characterised by clean elemental shapes. The designs are based on the idea of enhancing the value of the materials
used. This combines with technical innovation in the drawing process: steel
sheets are pressed between two steel moulds to create three-dimensional
shapes. They are distinctive innovative items and, thanks to their balanced
design and discrete elegance, they are perfect for commercial use. The chairs have a steel frame and galvanised metal mesh bodywork. The bistro tables have a rigorous design, which is also suitable for more
refined settings. The tabletop and base are made in sheet metal with tubular steel mountings. They are available in a square version in two sizes
or in a rectangular version. The chairs from the same line complement these tables perfectly.
FINISHES
Frame Options:
White
Antique Iron
Black
Indian Brown
Red
DESIGN
Christophe Pillet
zenithinteriors.com
ROUND CHAIR, ARMCHAIR, LOUNGE CHAIR, STOOL & SUN LOUNGER
STANDARD & OPTIONAL
FEATURES/FINISHES
CHAIR
ARMCHAIR
LOUNGE CHAIR
STOOL
SUN LOUNGER
Steel frame
•
•
•
•
•
Galvanised metal mesh
•
•
•
•
•
Stackable
8 high
4 high
8 high
4 high
3 high
Cushions
+
+
+
+
+
• Standard feature – Not available + Optional feature
DIMENSIONS
Round Chair:
H 790mm x D 580mm x W 630mm x SH 450mm
Round Armchair:
H 790mm x D 580mm x W 630mm x SH 450mm
Rounge Lounge Chair:
H 840mm x D 870mm x W 920mm x SH 380mm
Round Stool:
H 1050mm x D 520mm x W 580mm x SH 750mm
Round Sun Lounger:
H 770mm x D 1600mm x W 780mm
ROUND TABLES
STANDARD & OPTIONAL
FEATURES/FINISHES
DINING TABLE
OCCASIONAL TABLE
HIGH TABLE
Tubular steel mounting
•
•
•
•
•
•
Sheet metal top
• Standard feature – Not available + Optional feature
DIMENSIONS
Round Round Dining Table:
H 750mm x D 900mm x W 900mm
Round Square Dining Table:
H 750mm x D 600mm x W 600mm
Round Rectangle Table:
H 750mm x D 700/800mm x W 500/120mm
Round Occasional Table:
H 420mm x D 1000/800mm x W 420/800mm
Round High Square Table:
H 1050mm x D 600mm x W 600mm
zenithinteriors.com
ROUND CHAIR, ARMCHAIR, LOUNGE CHAIR, STOOL,
TABLE & SUN LOUNGER
CARE & MAINTENANCE
1.DO NOT USE THE FOLLOWING PRODUCTS on any parts made of
stainless steel: Chlorine bleach or detergents containing bleach (they can
corrode stainless steel)
Hydrochloric acid or products containing chlorides (they can corrode
stainless steel)
2.Salt, limestone or acids (contained in coffee, wine, orange juice, tomato
juice, lemon, etc.) may discolour parts made of stainless steel if not cleaned
promptly.
3.Products or parts made of stainless steel used near the seaside or for the
interior decoration of swimming pools require more frequent cleaning in
order to remove chlorites deposited on them and to prevent corrosion and
chemical deterioration of the external surfaces.
4.Stains or rust noted on stainless steel surfaces must be cleaned promptly.
5.Stains left in place for long periods may become permanent.
6.Rust may cause chemical reactions or corrode stainless steel.
To remove stains or rust:
Apply a specific non-abrasive detergent or polish for stainless steel.
Test the product on a stain in a place that is not easily visible to make sure
that the original surface finish has not been damaged.
Remember to rub in a linear direction (not circular).
Do not use abrasive pads.
Rinse thoroughly with clean water.
Lastly, dry thoroughly in order to prevent streaks from occurring, rubbing in
the sense of the fibres.
zenithinteriors.com