NF9-4
SET UP INSTRUCTIONS:
1.
2.
3.
4.
5.
6.
7.
8.
9.
CONNECT BOTTOM AND TOP RAILS FOLLOWING THE LABELS
CONNECT SIDE RAILS
CLEAN THE FRAME AND PLACE THEM ON CLEAN PLACE
CAREFULLY REMOVE FABRIC COVER FROM BAG
PLACE COVER AROUND THE BOTTOM OF THE FRAME
PULL COVER CAREFULLY UP TO THE TOP
CLOSE ALL ZIPPERS
ADJUST FABRIC AROUND THE FRAME
CONNECT CABLE HARNESS TO THE EYEBOLTS
Frame Assembly
Assemble frame as shown
17
Welded Corner
18
BREAK DOWN INSTRUCTIONS:
REVERSE SET-UP STEPS TO BREAKDOWN FRAME
11
16
FABRIC CARE INSTRUCTIONS:
1.
UNZIP COVER ZIPPERS
2.
CAREFULLY REMOVE FABRIC COVER
3.
CLOSE ALL ZIPPERS
4.
FOLD OR ROLL NEATLY
5.
PLACE FABRIC IN COVER BAG
13
12
15
14
10
4
5
Frame parts
8
9
SWAGE
3
7
SWAGE
6
x3
2
22' Dia. Curve tube
w/ molded connector
1
ZIPPER
SWAGE
x3
22' Dia. Curve tube
w/ molded connector & eye bolt
x3
x3
x6
4' Special
Corner
44" Curved
Spreader
22' Dia. Curve tube
Fabric Cover
x3
GRAPHIC SIZE: 105 1/2" x 48"(V)
Fabric: 4417 (3) Panels
Add a 2" bleed on all sides
x1
PILLOWCASE CONSTRUCTION
48" Steel wire rope
Fabric Cover