Problem 5.77 Consider the delta topology in Fig. P5.77. Use Multisim to generate
response curves for υa , υb , and υc . Apply Transient Analysis with TSTOP
= 3 × 10−10 s.
+
t=0
υc
+
1V
_
υa
1 fF
1
kΩ
M
_
5
3.
Ω
5 fF
10 kΩ
_
2 fF
υb
+
Figure P5.77 Circuit for Problem 5.77.
Solution: Figure P5.77(a) shows the circuit in Multisim and Fig. P5.77(b) shows the
results of Transient Analysis. Voltage υa , υb , and υc in Fig. P5.77 correspond to V1,
V3, and V1 − V3 in the Multisim circuit. The expression V1 − V3 has to be entered
in the Transient Analysis setup window. In the Transient Analysis setup, TSTOP was
set to 3e-10 s and Minimum Number of Time Points to 500.
Figure P5.77(a)
All rights reserved. Do not reproduce or distribute. © 2016 National Technology and Science Press
Figure P5.77(b)
All rights reserved. Do not reproduce or distribute. © 2016 National Technology and Science Press