®
BALL
VALVE
CATALOGUE
//
The Fort Vale
Range of
Ball Valves
CATALOGUE REVISION_01-27.01.15
© Fort Vale Engineering Ltd. 2015
THIS PAGE IS INTENTIONALLY BLANK
BALL VALVE
CATALOGUE
//
CONTENTS
//
PAGE
AIRLINE BALL VALVES //
» 25mm PFA Lined Flanged Blacko Airline Ball Valve
1
» 1½” BSP Blacko Airline Ball Valve
» 1½” Dual Fitting Blacko Airline Ball Valve
» 1½” Flanged Blacko Airline Ball Valve
2
3
4
» 2” Blacko Ball Valve - Slotted Outlet (This valve
may also be used as a discharge valve)
» 2” Pneumatically Actuated Blacko Airline Ball Valve
» Airline Valve Weld-in Flanges
» Airline Valve Installation & Conversion Kits
5
6/7
8
9
DISCHARGE BALL VALVES //
» 50mm PFA Lined Flanged Ball Valve
10
» 2” Blacko Ball Valve - Slotted Outlet (See Airline
Section)
» 2” Ball Valve - H2O2 Specification
» 2” Blacko Ball Valve - Offshore Specification
» 2” Full Bore Ball Valve - Gas Specification
5
11
12
14/15
» 80mm PFA Lined Flanged Ball Valve
16/17
» 3” Blacko Ball Valve - 3" BSP Outlet
» 3” Blacko Ball Valve - Slotted Outlet
18/19
20/21
» 4" Ball Valve - Rail Specification
22/23
» Socket / In-Line Ball Valves
24
FIRESAFE & LETHAL SERVICE
BALL VALVES //
®
»
»
»
»
1" Firesafe / Lethal Service Ball Valve
2" Firesafe / Lethal Service Ball Valve
2" Firesafe Only Ball Valve
3" Firesafe / Lethal Service Ball Valve
© Fort Vale Engineering Ltd. 2015
26/27
28/29
30/31
32/33
BALL_CONTENTS REV01-27.01.15
®
Data
PFA Lined 25mm Reduced Bore
Flanged Airline Ball Valve
PFA Lined 25mm Reduced Bore Flanged Airline Ball
Valve - inlet flange drilled 4 x 18mm slots on a 100mm to
125mm PCD; outlet flange (tank connection) drilled 4 x
11mm holes on a 103.5mm PCD. Valve manufactured in
stainless steel with PTFE main seal. All parts in contact
with the cargo lined with PFA.
Options - range of PFA lined ball valves (See RANGE)
Fitting Details
Specification
Weight
Design Pressure (MAWP)
Test Pressure
Design Temperature Range
Part number : 530/P100
Ø 152.0
Ø 38.1
80.5
Ø 80.4
5.3 Kg
6.9 Bar (100 PSI)
10.3 Bar (150 PSI)
-40°C to +200°C
-40°F to +392°F
23.6
Valve complies with EN14432:2006 and RID norms.
Ø 78.0
Ø 127.0
Range
Ø 25.0
Description
530/P100
370/P100
360/P030X
25mm PFA lined reduced bore ball valve
50mm PFA lined full bore ball valve
80mm PFA lined full bore ball valve
OUTLET 4 HOLES Ø 11.0
EQUI-SPACED
ON A 103.5 PCD.
Associated Parts
108.9
Part No.
INLET 4 SLOTS Ø 18.0
EQUI-SPACED ON
A 100 TO 125 PCD.
45°
Part No.
Associated Parts
350/0024
355/1250
530/8053CM
5005-348
311/3510
Tank weld-in pad
Stud kit
Blind flange
Solid PTFE outlet gasket
Bolting kit
Parts drawing
1
2
3
4
5
6
7
8
9
Item
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
M5 socket screw
Retaining washer
Handle
M6 button screw (4)
Stuffing clamp
Seal carrier for lining
Perfluoroelastomer O ring
Perfluoroelastomer O ring
Fortyt O ring
PFA lined body
PFA lined ball & stem
PFA lined clamp plate
PTFE front & rear seal (2)
5111-111
20370/5
530/0020/1
5121-013
530/1014
530/1013
5005-586
5005-384
5005-601
530/P110
530/1010L
530/1011PL
530/0024
10
11
12
13
© Fort Vale Engineering Ltd. 2014
Page 1
BALL024 REV04-26.06.14
®
1½” Blacko Airline Ball Valve
Data
1½” Airline Ball Valve - 1 ½” BSP male inlet.
Complete with pressure gauge connection and TIR
facility to handle. Contact parts manufactured in 316
stainless steel with PTFE seals.
Optional extras - gauge guard and/or gauze filter,
¼” BSP plug with TIR wire.
Specification
Fitting Details
Part Number : 530/0000
59.7
Weight
Design Pressure
Test Pressure
Design Temperature
2.9 Kg
MAWP 10 Bar (145 PSIG)
21.4 Bar (310 PSIG)
-55°C to 205°C (-67°F to 401°F)
Approved to BS EN14432.
167.2
Ø 38.4
Ø 29.3
Range
11.9
86.9
Part No.
530/0000
530/0000F
530/0000G
Ø 29.3
530/0000FG
96.8 (SQUARE)
73.2 (SQUARE)
530/0000W
Description
1½” BSP inlet standard valve.
1½” BSP inlet valve with gauze.
1½” BSP inlet valve with gauze guard.
1½” BSP inlet valve with gauze and gauze
guard.
1½” BSP inlet valve with ¼” BSP plug and
TIR wire.
Associated Parts
¼” BSP GAUGE
CONNECTION
4 HOLES 10.8 THRO EQUI-SPACED
AS SHOWN ON A 103.5 PCD
Associated Parts
Gauge
Gauge Adaptor
1½” BSP Dust Cap
Stud Kit
Tank Pad
Part No.
920/07BBSP
352/4004
10300PS
350/1300
350/0025
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Part No.
5112-031
5113-005
531/0025
5005-008
5120-017
353/0010
530/0100
530/0040
5005-048
5128-005
5005-006
350/0002
5005-007
530/0001
5003-002
530/0003
5113-036
Parts drawing
1
2
17
3
16
4
5
15
6
14
7
8
9
11
10
Description
Self-locking nut
M8 washer
Handle
PTFE O ring (2)
Snap ring (optional suffix ‘F’)
Gauze filter (optional suffix ‘F’)
Valve body
Gauge guard (optional suffix ‘G’)
PTFE O ring
¼” BSP plug
Front ball seal
Ball
Rear ball seal
Spindle
PTFE washer
Stuffing boss (2)
Disc spring
12
13
Repair Kits: Items marked included in Repair Kit - 530/00RK
Seal Kits: Items marked included in Seal Kit - 530/00SK
© Fort Vale Engineering Ltd. 2016
Page 2
BALL002 REV07-29.03.16
1½” Dual Fitting Blacko
Airline Ball Valve
Data
TM
1½” Dual Inlet Airline Ball Valve - 1½” BSP and 1½”
NPT male inlet connections. Complete with pressure
gauge connection and TIR facility to handle. Contact
parts manufactured in 316 stainless steel with PTFE
seals.
Optional extras - gauge guard and/or gauze filter.
Specification
Fitting Details
Part Number : 530/0300
Weight
Design Pressure
Test Pressure
Design Temperature
73.1 (2.88")
5.25 Kg
MAWP 10 Bar (145 PSIG)
21.4 Bar (310 PSIG)
-55°C to 205°C (-67°F to 401°F)
Approved to BS EN14432.
94.0 (3.70")
96.7 (3.81")
4 HOLES 10.7 DIA
THRO 0.42"
Range
Type
Gauze
1½”BSP-1½”NPT
1½”BSP-1½”NPT
1½”BSP-1½”NPT
1½”BSP-1½”NPT
Without
With
With
Without
Gauge Guard
Part No.
Without
Without
With
With
530/0300
530/0300F
530/0300FG
530/0300G
85.85 (3.38”)
167.4 (6.59")
139.7 (5.50")
Associated Parts
¼" BSP GAUGE CONNECTION
124.97 (4.92”)
Associated Parts
Gauge
Gauge Adaptor
BSP Cap
NPT Cap
Stud Kit
Tank Pad
Part No.
920/07BBSP
352/4004
10300PS
10300PNT
350/1300
350/0025
Parts drawing
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
16
2
15
14
13
3
12
11
4
5
10
6
9
8
Description
M8 washer
Handle
PTFE O ring (2)
Valve body
Gauge guard (optional suffix ‘G’)
PTFE O ring
¼” BSP plug
Rear ball seal
Ball
Gauze filter (optional suffix ‘F’)
Front ball seal
Spindle
Stuffing boss (2)
PTFE washer
Disc spring
Self-locking nut
Part No.
5113-005
530/0020
5005-008
530/0301
530/0040
5005-048
5128-005
5005-007
350/0002
353/0010
5005-006
530/0001
530/0003
5003-002
5113-036
5112-031
7
Repair Kits: Items marked included in Repair Kit - 530/00RK
Seal Kits: Items marked included in Seal Kit - 530/00SK
© Fort Vale Engineering Ltd. 2011
Page 3
BALL001 REV05-06.10.11
1½” Flanged Blacko
Airline Ball Valve
®
Data
1½” Flanged Airline Ball Valve - inlet flange slotted to
1½” BSTD/1½” ASA 150. Complete with pressure gauge
connection, gauge guard and TIR facility to handle.
Contact parts manufactured in 316 stainless steel with
PTFE seals.
Optional extra - gauze filter.
Fitting Details
Specification
Weight
Design Pressure (MAWP)
Test Pressure
Design Temperature
Part Number : 530/1000
3.7 Kg
7 Bar (101 PSIG)
15 Bar (217 PSIG)
-55°C to 205°C
(-67°F to 401°F)
74.4 (2.93")
Approved to BS EN14432.
Range
1 " BSP GAUGE CONNECTION
4
167.4 (6.59”)
96.8 (3.81")
94.0 (3.70")
152.4 (6.00") DIA
73.1 (2.88")
Inlet Flange
Gauze
TIR
Gauge Guard
Part No.
1½”BSTD/ASA
1½”BSTD/ASA
Without
With
Standard
Standard
Standard
Standard
530/1000
530/1000F
Associated Parts
Associated Parts
Blind Flange
Bolting Kit
Gasket
Stud Kit
Tank Pad
4 HOLES 10.7 (0.42")
4 SLOTS 18.0mm DIA THRO'
EQUI-SPACED ON 3.874" I/D
PCD (98.4mm PC) ISO 9669
Part No.
530/8053CM
311/3500
5005-348
350/1300
350/0025
Parts drawing
16
Item
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2
15
14
3
13
4
12
5
11
10
9
8
Description
Self locking nut
Handle
Snap ring (optional suffix ‘F’)
Valve body
Gauge filter (optional suffix ‘F’)
¼” BSP plug
PTFE O ring
Ball
Front ball seal
Rear ball seal
Spindle
PTFE O ring (2)
Stuffing boss (2)
PTFE washer
Disc spring
M8 washer
Part No.
5112-031
530/0020
5120-017
530/1100
353/0010
5128-005
5005-048
350/0002
5005-006
5005-007
530/0001
5005-008
530/0003
5003-002
5113-036
5113-005
6
7
Repair Kits: Items marked included in Repair Kit - 530/00RK (item 6 x2)
Seal Kits: Items marked included in Seal Kit - 530/00SK
© Fort Vale Engineering Ltd. 2012
Page 4
BALL003 REV05-27.09.12
Data
2” Full Bore Blacko Ball Valve
TM
2” Full Bore Blacko Ball Valve - inlet flange drilled 4 x
18mm holes on a 125mm PCD (DIN50 PN16); outlet
flange with 4 x 18mm open slots on a 120.7mm minimum
diameter to suit 2” ASA150 and DIN50 PN40. Left hand
operated with TIR facility to handle. Contact parts
manufactured in 316 stainless steel with PTFE seals.
Options - Full range of air inlet and discharge ball valves
available, both manually and mechanically actuated.
Steam-heated version.
Specification
Fitting Details
Part number : 370/0100
Weight
Design Pressure (MAWP)
Hydraulic Test Pressure
Design Temperature Range
94.6
190.5
5.5 Kg
7 Bar (101.5 PSI)
15 Bar (217.5 PSI)
-40°C to 205°C
(-40° F to 400°F)
45°
4 HOLES Ø17.8
EQUI-SPACED ON
A 125.0 PCD.
14.0
Ø165.1
Ø50.0
Ø50.0
4 SLOTS Ø17.8
EQUI-SPACED ON
A 120.7 MIN PCD.
Ø85.1
Ø67.9
Design Approval by Lloyds Register of Shipping
Approved to BS EN14432
Range
Part No.
Description
370/0100SH
370/0140
370/0150
370/0180
c/w steam heating provision
c/w DN80 inlet adaptor & outlet blind flange
c/w 2” BSP outlet spigot flange
c/w outlet blind flange
Associated Parts
Ø165.1
Recommended bolt torque 81 Nm (60 Lb/ft)
Associated Parts
Part No.
Tank weld-in pad
Stud kit
Outlet gasket
Blind flange
Bolting kit
355/3100
311/3700
5005-361
370/4239CM
311/3500
Parts drawing
1
2
3
4
5
6
7
8
Item
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
M10 self lock nut
M10 plain washer
Handle
16mm Belleville washer (3)
Stuffing collar
PTFE O ring
Bottom bearing
Spindle
Stop bolt
2” ballvalve body
PTFE seal
50mm ball
PTFE seal
5112-008
5113-009
370/0125
5113-038
370/0103
5005-688
370/0104
370/0120
370/0107
370/0110
370/0102
370/3301
370/0105
9
10
13
SEAL KIT
Part number 370/01SK contains all parts marked
12
11
© Fort Vale Engineering Ltd. 2012
Page 5
BALL019 REV04-04.10.12
®
Data
2” Pneumatic Blacko Ball Valve
2” Pneumatically Operated Air Inlet Ball Valve - inlet
flange drilled 4 x 18mm holes on a 125mm PCD; outlet
flange 4 x 18mm open slots on a 120.7mm minimum PCD
to suit 2” ASA 150/DIN50 PN40. Valve manufactured in
316 stainless steel with PTFE seals. Fitted with Kinetrol
pneumatic actuator with spring return.
Options - Full range of manually operated air inlet valves
available.
Specification
Weight
Design Pressure (MAWP)
Test Pressure
Design Temperature: Valve
Kinetrol Actuator
Range
8 Kg
7 Bar (101.5 PSI)
15 Bar (217.5 PSI)
-40°C to 205°C
(-40°F to 400°F)
-20°C to 80°C
(-4°F to 176°F)
Part No.
Description
370/0100PN
370/0100
2” pneumatic Blacko ball valve
2” manually operated Blacko ball valve
Associated Parts
Ball valve approved to BS EN 14432.
Associated Parts
Part No.
Mating flange
Tank weld-in pad
Stud kit
Outlet gasket
Blind flange
Bolting kit
294/0082
355/3100
311/3700
5005-361
370/4239CM
311/3000
Fitting Details
Part Number : 370/0100PN
Ø 165.1
Ø 97.5 STD SERRATIONS
Ø 32.6
Ø 111.0
Ø 72.2
Ø 50.0
Ø 50.0
Ø 165.1
Ø 85.1
134.6
4 HOLES Ø 17.8MM
EQUI-SPACED ON A
125MM PCD
4 OPEN SLOTS Ø17.8MM
EQUI-SPACED ON A
120.7MM MIN.PCD
© Fort Vale Engineering Ltd. 2012
Page 6
BALL016 REV01-01.10.12
®
2” Pneumatic Blacko Ball Valve
Data
Parts drawing
1
19
14
16
11
13
18
17
15
12
5
2
6
7
8
3
9
10
4
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Description
Body
PTFE front seal
Ø50mm ball
PTFE rear seal
Spindle
PTFE O ring
Belleville washer (3)
Spline adaptor assembly
M6 spring washer (4)
M6 hex bolt (4)
Kinetrol pneumatic actuator
Mounting bracket
M5 spring washer (6)
M5 hex bolt (6)
M10 self lock nut
M10 plain washer
Stuffing collar
Bottom bearing bush
Spacer boss (4)
Part No.
370/0110
370/0102
370/3301
370/0105
370/0120
5005-688
5113-038
370/0164
5113-008
5111-076
5127-052
370/0108
5113-023
5111-072
5112-008
5113-009
370/0103
370/0104
370/0163
SEAL KIT
Part number 370/01SK contains all parts marked
© Fort Vale Engineering Ltd. 2012
Page 7
BALL017 REV01-01.10.12
®
Data
Part Number : 350/0025
Tank weld-in flange to suit 1½” Blacko airline ball valve.
Manufactured in 316 stainless steel.
Airline Valve Ancillaries Tank Weld-in Flanges
Fitting Details
Ø127.0
22.4
Ø57.2 SERRATIONS
4 X M10 HOLES
EQUI-SPACED
ON A 103.4 PCD
Part Number : 355/1000
Tank weld-in flange to suit 2” BSP airline butterfly valve.
Manufactured in 316 stainless steel.
Ø31.8
Fitting Details
Ø127.0
Ø76.2 SERRATIONS
22.4
Ø48.8
4 X M10 HOLES
EQUI-SPACED
ON A 100.0 PCD
Part Number : 355/3100
Tank weld-in flange to suit 2” flanged airline butterfly
valve. Manufactured in 316 stainless steel.
Fitting Details
Ø165.1
Ø88.9 SERRATIONS
29.2
Ø48.8
4 X M16 HOLES EQUISPACED ON A 125.0 PCD.
© Fort Vale Engineering Ltd. 2012
Page 8
BALL004 REV01-26.09.12
UK Tel : +44 (0)1282 687100
UK Fax: +44 (0)1282 687110
[email protected]
Spares
NL Tel : +31 180 483333
NL Fax: +31 180 410797
[email protected]
TM
Airline Valve Installation
1½” Airline Ball Valves
Bolt Kit
311/3500
1½" BSP
Dust Cap
10300PS
Blind Flange
530/8053CM
Gasket
5005-348
1½" BSP Cap
10300PS
1½" BSP Airline
Ball Valve
530/0000
1½" NPT Cap
10300PNT
1½"
Flanged Airline
Ball Valve
530/1000
1½" BSP
Dual Fitting Airline
Ball Valve
530/0300
Stud Kit
350/1300
Tank Pad
350/0025
1½” BSP to DIN Adaptor Flange Conversion Kits
To convert a 1½” BSP Blacko airline ball valve to a DIN40 or a DIN50 flanged connection.
Kit includes BSP to DIN adaptor flange, bent handle, envelope gasket, blind flange and bolting kit. Adaptor
flange available separately.
Note : Airline ball valve not included.
Description
Part No.
1½” BSP to DIN 40 conversion kit
1½” BSP to DIN 40 adaptor flange only
1½” BSP to DIN 50 conversion kit
1½” BSP to DIN 50 adaptor flange only
530/ADAP40KIT
530/ADAP40
530/ADAP50KIT
530/ADAP50
© Fort Vale Engineering Ltd. 2013
Page 9
SPA042 REV04-13.06.13
PFA Lined 50mm Full Bore
Flanged Ball Valve
®
Data
PFA Lined 50mm Full Bore Flanged Ball Valve - inlet
flange drilled 4 x 18mm holes on a 126mm PCD; outlet
flange drilled 4 x 18mm slots on a 120.7mm to 127mm
PCD. Valve manufactured in stainless steel with PTFE
main seal. All parts in contact with the cargo lined with
PFA.
Options - range of PFA lined ball valves (See RANGE)
Fitting Details
Specification
Part number : 370/P100
223.9
Ø 165.0
Ø 100.6
21.0
Ø 50.0
Weight
Design Pressure (MAWP)
Test Pressure
Design Temperature Range
12.15 Kg
6.9 Bar (100 PSI)
10.3 Bar (150 PSI)
-40°C to 200°C
(-40°F to 392°F)
67.0
131.0
Valve complies with EN14432 and RID norms.
Range
Ø 105.0
Ø 165.0
Ø 50.7
Part No.
530/P100
370/P100
360/P030X
67.0
45°
4 SLOTS Ø18
EQUI-SPACED
ON A 120.7 TO
127.0 PCD
Description
25mm PFA lined reduced bore ball valve
50mm PFA lined full bore ball valve
80mm PFA lined full bore ball valve
142.9
Associated Parts
Part No.
311/3790
311/3590
370/4239PFA
Associated Parts
Stud kit
Bolting kit
PFA lined blind flange
Fitting Details
1
2
3
17
4
5
6
7
8
10
9
16
15
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Description
M5 screw
Retaining washer
Handle
Stop pin (2)
Stuffing plate
Seal carrier
Viton O ring
Viton O ring
Perfluoroelastomer O ring
PFA lined body
PTFE ball seal (2)
Fortyt O ring (2)
PFA lined obturator
M8 cap screw (4)
PFA lined clamp plate
Perfluoroelastomer O ring (2)
M6 cap screw (2)
Part No.
5111-113
20370/5
370/3306/1
370/P107
370/P114
370/P113
ORB115VL
ORB121VL
5005-214PER
370/P110
370/P115
ORM0580400F0
370/P101
5111-010
370/P111
5005-370P
5111-015
14
SEAL KIT
Part number 370/P100SK contains all parts marked
12
11
13
© Fort Vale Engineering Ltd. 2017
Page 10
BALL027 REV05-24.04.17
2” Full Bore Ball Valve
- Hydrogen Peroxide
®
Data
2” Full Bore Ball Valve - for Hydrogen Peroxide tank
specification. Inlet drilled 6 x 14mm holes on a 168mm
PCD. Outlet drilled 4 x 18mm slots to suit 2” ASA 150,
2” BSTD and DIN 50 PN 10. The inlet flange is specially
designed to fit a standard 3” top discharge pad to ensure
interchangeability with the Fort Vale 3” flanged butterfly
valve. The ball valve body has a ¼” BSP connection to
accept a pressure gauge and the ball incorporates a
bleed hole to facilitate monitoring the tank pressure at all
times. Contact parts manufactured in 316 stainless steel
with PTFE seals.
Options - other inlet flanges available.
Specification
Fitting Details
Example shown : 370/0140
190.5
Weight
Design Pressure
Hydraulic Test Pressure
Design Temperature
Ø50.0
94.6
121.6
6 HOLES Ø14MM
SPACED AS SHOWN
ON A 168.3 PCD
32.5
4 HOLES Ø18MM
EQUI-SPACED ON A
125.0 PCD
BLANKING FLANGE
35°
35°
Approved to BS EN14432
Range
4 SLOTS Ø18MM
EQUI-SPACED ON A
114.3 TO 125.0 PCD
55°
13.9 Kg
7 Bar (101.5 PSI)
15 Bar (217.5 PSI)
-40°C to 205°C
(-40°F to 400°F)
1/4"BSP
Different inlet flange configurations are available upon
request.
60.2
Associated Parts
72.1
97.6
12.7
11.3
Ø200.0
Ø140.0 SERRATIONS
Part No.
Associated Parts
368/0800
5005-222P
368/0810
5005-169
312/1000
Tank weld-in pad
Solid PTFE gasket
Syphon tube stub pipe assembly
CNAF/PTFE envelope gasket
Stud kit
Parts drawing
Item
1
2
3
Description
Part No.
Item
M10 self locking nut
M10 washer
Handle
5112-008
5113-009
370/0125
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
1
20
2
21
3
4
5
6
7
9
8
11
12
19
Description
Part No.
Belleville washer (3)
Stuffing collar
PTFE O ring
Bottom bearing
2” ball valve spindle
Stop screw
M16 hex bolt (4)
M16 spring washer (8)
M16 full nut (8)
Blanking flange
PTFE gasket
¼” BSP hex head plug
2” ball valve body
Rear PTFE ball seal
2” ball
Front PTFE ball seal
Adaptor flange
M16 stud (4)
5113-038
370/0103
5005-688
370/0104
370/0120
370/0107
5111-031
5113-012
5112-003
370/4239
5005-724P
5128-005
370/0115
370/0105
370/3309
370/0102
370/0145
S0600/3
18
SEAL KIT
Part no. 370/01SK contains all parts marked
17
16
15
14
13
12
11
© Fort Vale Engineering Ltd. 2013
10
Page 11
BALL012 REV03-19.09.13
®
Data
2” Full Bore Blacko Ball Valve
Offshore Specification
2” Full Bore Blacko Ball Valve - inlet flange with 4 open
slots to suit 2” BSTD / 2” ASA 150 and DIN50 PN40.
Outlet flange with 2” BSP spigot. Left hand operated with
TIR facility to handle. Contact parts manufactured in 316
stainless steel with PTFE seals.
Options - NPT outlet and cap available.
Specification
Fitting Details
Part number : 370/0150
39.6
83.3
7.5 Kg
7 Bar (101.5 PSI)
10.5 Bar (152.25 PSI)
-40°C to 205°C
(-40°F to 400°F)
Approved to BS EN 14432
Design approval by Lloyds Register of Shipping.
2” BSP
94.8
4 OPEN SLOTS
Ø17.8 THRO
EQUI-SPACED
WITH A MIN DIA
OF 114.3
Weight
Design Pressure (MAWP)
Hydraulic Test Pressure
Design Temperature
Range
4 HOLES Ø17.8
THRO EQUISPACED ON A
125.0 PCD
DN50 PN40
Part No.
Outlet
370/0150
370/0150NPT
2” BSP outlet spigot flange
2” NPT outlet and NPT cap
165.1
Associated Parts
165.1
Part No.
Description
355/3100
311/3700
10301PS
10301NPTP
Tank weld-in flange
Stud kit
2” BSP blank cap with chain & PTFE seal
2” NPTP blank cap with captivation wire &
PTFE seal
Parts drawing
SEAL KIT
Part number 370/015SK contains all parts marked
1
2
17
3
4
5
7
8
6
9
16
15
Item
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
M10 self lock nut
M10 plain washer
Handle
16mm Belleville washer (3)
Stuffing collar
Bottom bearing bush
PTFE O ring
Spindle
Stop bolt
2” ballvalve body
PTFE seal (2)
50mm ball
Body seal
Outlet flange
M16 full nut (4)
M16 spring washer (4)
M16 hexhead setscrew (4)
5112-008
5113-009
370/0125
5113-038
370/0103
370/0104
5005-688
370/0120
370/0107
370/0110
370/0102
370/3301
370/0106
370/0130
5112-003
5113-012
5111-036
14
REPAIR KIT
Part number 370/015RK contains all
parts marked
13
11
12
11
© Fort Vale Engineering Ltd. 2003
10
Page 12
BALL015 REV02-27.09.12
Page 13
THIS PAGE IS INTENTIONALLY BLANK
2” Full Bore Gas Ball Valve
Data
TM
2” Full Bore Gas Ball Valve - DN 50 PN 40 high pressure
valve. Flange drilling: 4 x 18mm holes on a 127mm PCD
(2” ASA150) and 8 x 18mm holes on a 127mm PCD (2”
ASA 300). Right hand operation.
Contact parts
manufactured in 316 stainless steel with PTFE seals.
Options - outlet flange supplied with 1/8” NPT connection
to fit bleed valve. Other flange drillings available. Left
hand operation.
Specification
Weight
Design Pressure (MAWP)
Service Test Pressure
Design Temperature Range
Range
9 Kgs
34.5 Bar (500 PSI)
70 Bar (1015 PSI)
-50°C to 80°C
(-58°F to 176°F)
Design approval by Lloyds Register of Shipping and
Russian Maritime Register of Shipping.
All valves may be manufactured to TPED.
Part No.
Description
370/3335B
370/3300B
370/3400B
2” ASA 300lb right hand valve
DN 50 PN 40 right hand valve
DN 50 PN 40 left hand valve
Associated Parts
Part No.
Associated Parts
252/2095
Blind flange (2” ASA 300 lbs)
Fitting Details
Example shown : 370/3335B
4 HOLES Ø 18.0 EQUI-SPACED
ON A 127.0 PCD (5.00”)
[2” ASA 150]
150.5 (5.93”)
20.3 (0.80”)
3.0 (0.12”)
Ø 165.1 (6.50”)
Ø 101.4 (3.99”) SERRATIONS
50.0 (1.97”)
Ø 102.1 (4.02”)
Ø 165.1 (6.50”)
138.4 (5.45”)
223.8 (8.81”)
8 HOLES Ø 18.0
EQUI-SPACED ON
A 127.0 PCD (5.00”)
[2” ASA 300]
61.5 (2.42”)
© Fort Vale Engineering Ltd. 2008
Page 14
GAS025 REV02-10.12.07
2” Full Bore Gas Ball Valve
Data
TM
Parts drawing
1
SEAL KIT
2
Part number 370/33SKB contains
all parts marked
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
16
18
19
20
21
A detailed step-by-step maintenance manual is
available for our gas ballvalve in both printed and
CD formats. Please contact our Sales team for
further information.
© Fort Vale Engineering Ltd. 2008
Item
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
M10 self locking nut
M10 washer
Handle
Disc spring (3)
M6 hex head bolt (4)
M6 spring washer (4)
Clamp plate
Neoprene washer
Neoprene washer
Spindle bush
Bottom seal
Bottom bush
Spindle
Ball valve body
M12 stud (4)
RTFE ball seal (2)
50mm ball
Body seal
Ball valve body half
M12 spring washer (4)
M12 full nut (4)
5112-008
5113-009
370/3306
5113-038
5111-022
5113-008
370/3305B
5005-216
5005-866N
370/3307B
359/2007
370/3321
370/3320
370/3365
370/3314
370/3302
370/3301
370/3303
370/3316
5113-010
5112-006
Page 15
GAS026 REV01-02.12.07
PFA Lined 80mm Full Bore
Ball Valve
Data
TM
PFA Lined 80mm Full Bore Ball Valve - inlet flange drilled
4 x 18mm holes on a 160mm PCD; outlet flange drilled 4
x 18mm slots equi-spaced on a 146 to 160mm PCD. (3”
BSTD to DIN80) Left hand operated with TIR to handle.
Valve manufactured in stainless steel with PTFE main
seal. All parts in contact with the cargo lined with PFA.
Options - right hand operated version. Range of PFA
lined ball valves (See RANGE)
Specification
Range
Weight
Design Pressure (MAWP)
Test Pressure
Design Temperature Range
12.9 Kg
6.9 Bar (100 PSI)
10.34 Bar (150 PSI)
-40°C to 130°C
-40°F to 266°F
Part No.
Description
530/P100
370/P100
360/P030X
25mm PFA lined reduced bore ball valve
50mm PFA lined full bore ball valve
80mm PFA lined full bore ball valve
X in part number denotes whether left (L) or right (R)
hand valve.
Valve complies with EN14432:2006 and RID norms.
Associated Parts
Part No.
Associated Parts
368/0500P
368/8047L
5005-417
360/8095P
3” BSP PFA lined outlet flange
3” BSP Halar lined eccentric outlet flange
Solid PTFE outlet gasket
PFA lined blind flange
Fitting Details
Example shown : 360/P030L
378.2
© Fort Vale Engineering Ltd. 2009
Ø 197.0
Ø 113.0
Ø 74.0
Ø 194.0
OUTLET FLANGE
4 X 18MM SLOTS
EQUI-SPACED ON
A 146MM (3”BSTD)
TO 160MM (DIN80)
PCD
Ø 140.0
170.0
POSITION CLAMP
PLATE TO ACHIEVE
HANDING.
(CLAMP PLATE
SHOWN IN LEFT
HAND POSITION)
4 HOLES Ø 18MM
SPACED AS SHOWN
ON A 160MM PCD.
45.0°
117.8
27.4
20.7
Page 16
BALL025 REV00-21.09.09
PFA Lined 80mm Full Bore
Ball Valve
®
Data
Parts drawing
1
2
3
4
5
6
7
8
17
9
16
Item
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
M8 hex bolt (4)
M8 spring washer (4)
M12 locking nut
M12 washer
Handle
20mm washer (2)
Clamp plate
Stainless steel stuffing collar
PTFE O ring (3)
PFA lined spindle
PFA lined body
PTFE front & rear seal (2)
PFA coated ball
PFA lined clamp plate
M6 countersunk bolt (3)
Bottom stuffing collar
Top stuffing collar
5111-046
5113-003
5112-007
5123-003
360/3416
5113-041
360/3406/1
360/3464
5005-654
360/3422PL
360/P020
360/3402/5
360/3401PL
360/3462PL
5111-030
360/3413/1
360/3412/1
SEAL KIT
Part number 360/P0SK contains all parts marked
10
11
12
13
12
14
15
© Fort Vale Engineering Ltd. 2017
Page 17
BALL026 REV02-24.04.17
3” Blacko Ball Valve 3” BSP Outlet
Data
TM
3” Blacko Ball Valve - inlet flange drilled 6 x 14mm holes
(see below) on a 168mm PCD; 3” BSP male outlet
connection. Left hand operated with TIR facility to handle.
Contact parts manufactured in 316 stainless steel with
PTFE seals.
Options - Right hand operation. Steam heated version.
Specification
Range
Weight
Design Pressure (MAWP)
Hydraulic Test Pressure
Design Temperature Range
15.9 Kg
7 Bar (101.5 PSI)
10.5 Bar (152.3 PSI)
-29°C to 200°C
(-20°F to 392°F)
M12 bolts torque setting : 50 Nm (37 LBF FT)
Part No.
Description
360/5000L
360/5000R
360/5000XSH
Left hand operated, TIR
Right hand operated, TIR
Steam heated, left or right hand
operated
Associated Parts
Approved to BS EN14432
Part No.
Description
20378
360/0300
20406
5005-036
360/8070
311/3000
10303PS
10329P
Mating flange
Inlet bolting kit
Bobbin adaptor for 3” table D outlet
Outlet gasket 3” Table D
Blind flange
Outlet bolting kit
3” BSP dust cap with PTFE washer
3” dust cap washer
Fitting Details
Example shown : 360/5000L
55°
35°
168.4 (6.63”)
Ø 124.0 (4.88”) SERRATIONS
Ø 76.2 (3.00”)
6 HOLES Ø14.0 (0.551”)
SPACED AS SHOWN ON
A 168.3 (6.625”) PCD.
Ø 77.9 (3.07”)
3” BSP
378.2 (14.89”)
6 HOLES Ø14.0 (0.551”)
SPACED AS SHOWN ON
A 168.3 (6.625”) PCD.
55°
35°
105.8 (4.17”)
35°
163.3 (6.43”)
Ø 196.9 (7.75”)
28.4 (1.12”) FULL THREAD
© Fort Vale Engineering Ltd. 2011
Page 18
BALL007 REV03-19.09.11
3” Blacko Ball Valve 3” BSP Outlet
®
Data
Parts drawing
1
2
3
4
20
19
18
5
6
17
7
8
9
10
11
12
13
14
15
16
Item
1
2
3
4
5
6
7
8
9
10
Description
Part No.
Item
M8 hex head bolt (4)
M8 flat section spring washer (4)
M12 self locking nut
M12 washer
Top stuffing collar
Bottom stuffing collar
Bottom bearing
Spindle
3” flanged ball valve body
Back seal
5111-822
5113-003
5112-007
5123-003
360/3412
360/3413
360/3421
360/3422
360/5014
360/3402
11
12
13
14
15
16
17
18
19
20
SEAL KIT part number 360/50SK contains all parts
marked
© Fort Vale Engineering Ltd. 2017
Description
Part No.
Solid ball plug
Front seal
3” BSP male outlet flange
M12 full nut (6)
M12 flat section spring washer (6)
M12 hex head bolt (6)
PTFE O ring (2)
Clamp plate
20mm Belleville washer (2)
Handle weld assembly
360/3401
360/3405
20409/14
5112-006
5113-010
5111-023
5005-113
360/5005
5113-041
360/3416
REPAIR KIT part number 360/50RK contains all parts
marked
Page 19
BALL008 REV05-24.04.17
3” Blacko Ball Valve Slotted 4 Hole Outlet
Data
TM
3” Blacko Ball Valve Assembly - inlet flange drilled 6 x
14mm holes on a 168mm PCD. Slotted 4 hole outlet
flange. Left hand operated. Contact parts manufactured
in 316 stainless steel with PTFE seals.
Options - right hand operation. Steam heated version.
Available with high temperature seals. Version with 4
hole inlet also available.
Range
Specification
Weight
Design Pressure (MAWP)
Hydraulic Test Pressure
Design Temperature Range
12.55 Kg
7 Bar (101.5 PSI)
10.5 Bar (152.3 PSI)
-40°C to 200°C
(-40°F to 392°F)
Part No.
Description
360/5050X
3” standard ball valve, 6 hole inlet, 4 hole
outlet
Fitted with high temperature seals
Steam heated valve
3" standard ball valve, 4 hole inlet, 4 hole
outlet
Steam heated valve
360/5050XHT
360/5050XSH
360/5030X
Approved to BS EN14432
Associated Parts
360/5030XSH
Associated Parts
Part No.
Outlet flange
Outlet gasket
Blind flange
Bolting kit (outlet)
Mating flange
Inlet gasket to suit 20378 mating flange
Bolting kit (inlet)
368/0500
5005-417
360/8095
311/3500
20378
5005-169
360/0300
X in part number denotes whether left (L) or right (R)
hand valve
Fitting Details
Example shown : 360/5050L
378.2
Ø76.2
Ø115.8 STD SERRATIONS
Ø127.0
164.2
ROTATE CLAMP
PLATE TO ACHIEVE
HANDING. (Clamp
plate shown in left
hand position)
55°
6 HOLES Ø14.0
SPACED AS SHOWN
ON A 168.3 PCD
45°
105.1
35°
35°
77.5
Ø196.9 BOTH FLANGES
© Fort Vale Engineering Ltd. 2012
Ø127.0 STD SERRATIONS
SLOTTED OUTLET FLANGE
4 X 18MM WIDE SLOTS
MINIMUM 146.0 PCD - 3"BSTD
MAXIMUM 160.0 PCD - DIN80
15.4
20.0
2.5
Page 20
BALL009 REV05-25.01.12
3” Blacko Ball Valve Slotted 4 Hole Outlet
Data
TM
Parts drawing
1
2
3
4
5
6
7
8
17
9
16
10
11
12
13
14
15
Item
1
2
3
4
5
6
7
8
Description
Part No.
Item
M8 hex head bolt (4)
M8 spring washer (4)
M12 self locking nut
M12 washer
Handle
20mm Belleville washer (2)
Clamp plate
Top stuffing collar
5111-822
5113-003
5112-007
5123-003
360/3416
5113-041
360/5005
360/3412
9
10
11
12
13
14
15
16
SEAL KIT part number 360/50SK contains all
parts marked
© Fort Vale Engineering Ltd. 2011
Description
Part No.
Bottom stuffing collar
Bottom bearing
Spindle
3” flanged ball valve body
Back seal
Solid ball plug
Front seal
PTFE O ring (2)
360/3413
360/3421
360/3422
360/5015
360/3402
360/3401
360/3405
5005-113
REPAIR KIT part number 360/50RK contains
all parts marked
Page 21
BALL010 REV03-19.09.11
4” BSP Full Bore Ball Valve
Data
TM
4”BSP Full Bore Ball Valve - inlet flange drilled 8 x 18mm
holes equi-spaced on a 180mm PCD (DIN100 PN16);
outlet flange 4” BSP. Available with left hand or right hand
operation. Manufactured in 316 stainless steel fitted with
PTFE seals.
Options - available in sizes from 2” to 5” in stainless steel
or carbon steel. Steam-heated version. Alternative outlet
connections.
Specification
Fitting Details
Part Number : 460/5000X
Weight
Design Pressure (MAWP)
Hydraulic Test Pressure
Design Temperature Range
378.2
22.5 Kg
7 Bar (101.5 PSI)
10.5 Bar (152.3 PSI)
-55°C to 200°C
-67°F to 392°F
Ø158.8 SERRATIONS
4" BSP
Ø101.6
188.9
57.2
31.8 THREAD
Approved to BS EN14432.
i Operating Instructions available - OPIN25
Range
Part No.
Description
460/5000L
460/5000R
4” BSP ball valve with left hand operation
4” BSP ball valve with right hand
operation
4” BSP ball valve with steam heating
provision
4” ball valve with DIN100 PN16 outlet
152.4
460/5000XSH
460/5050X
209.7
14.0
INLET FLANGE:
8 HOLES Ø18.0
EQUI-SPACED
ON A 180 PCD
(DIN100 PN16)
Ø220.0
8 HOLES Ø14.0
EQUI-SPACED
ON A 197 PCD
14.0
© Fort Vale Engineering Ltd. 2011
21.0
Page 22
BALL020 REV02-17.11.11
®
4” BSP Full Bore Ball Valve
Data
Parts drawing
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
1
2
3
4
5
6
7
8
10
9
11
12
Description
Part No.
M8 hex bolt (4)
M8 spring washer (4)
Self-locking nut
M12 washer
Handle
Belleville washer (2)
Clamp plate
Top stuffing collar
PTFE O ring (2)
Bottom stuffing collar
Bottom bearing
Spindle
Body
Rear seal
4” solid ball
Front seal
4”BSP outlet flange
M12 full nut (8)
M12 spring washer (8)
M12 Hex bolt (8)
5111-046
5113-003
5112-007
5123-003
360/3416
5113-041
360/5005
360/3412
5005-113
360/3413
360/3421
360/3422
460/9051
460/5056
460/5057
460/5055
460/5060
5112-006
5113-010
5111-023
SEAL KIT
Part number 460/50SK contains all parts marked
13
14
15
16
17
18
19
20
© Fort Vale Engineering Ltd. 2014
Page 23
BALL028 REV00-11.12.13
UK Tel : +44 (0)1282 687100
UK Fax: +44 (0)1282 687110
[email protected]
Spares
NL Tel : +31 180 483333
NL Fax: +31 180 410797
[email protected]
TM
Female Socket Ball Valves - Stainless Steel
One Piece Ball Valve
Description
¼” BSP one piece ball valve
3
/8” BSP one piece ball valve
½” BSP one piece ball valve
¾” BSP one piece ball valve
1” BSP one piece ball valve
1¼” BSP one piece ball valve
1½” BSP one piece ball valve
2” BSP one piece ball valve
Two Piece Ball Valve
Part No.
410/104025
410/104037
410/104050
410/104075
410/104100
410/104125
410/104150
410/104200
Description
¼” BSP two piece ball valve
3
/8” BSP two piece ball valve
½” BSP two piece ball valve
¾” BSP two piece ball valve
1” BSP two piece ball valve
1¼” BSP two piece ball valve
1½” BSP two piece ball valve
2” BSP two piece ball valve
2½” BSP two piece ball valve
3” BSP two piece ball valve
Part No.
410/204025
410/204037
410/204050
410/204075
410/204100
410/204125
410/204150
410/204200
410/204250
410/204300
Three Piece Ball Valve
Description
¼” BSP three piece ball valve
3
/8” BSP three piece ball valve
½” BSP three piece ball valve
¾” BSP three piece ball valve
1” BSP three piece ball valve
1¼” BSP three piece ball valve
1½” BSP three piece ball valve
2” BSP three piece ball valve
2½” BSP three piece ball valve
3” BSP three piece ball valve
4” BSP three piece ball valve
Part No.
BSP
410/304025B
410/304037B
410/304050B
410/304075B
410/304100B
410/304125B
410/304150B
410/304200B
410/304250B
410/304300B
410/304400B
Part No.
WELD PREP
410/304025W
410/304037W
410/304050W
410/304075W
410/304100W
410/304125W
410/304150W
410/304200W
410/304250W
410/304300W
410/304400W
CAUTION: Do not overtighten these ball valves.
© Fort Vale Engineering Ltd. 2009
Page 24
SPA040 REV01-25.04.06
Page 25
THIS PAGE IS INTENTIONALLY BLANK
1" Firesafe / Lethal Service
Ball Valve
®
Data
1" Full Bore Firesafe / Lethal Service Ball Valve - inlet and
outlet flange drilled 4 x 18mm holes equi-spaced on a
89mm PCD. Contact parts manufactured in 316 stainless
steel fitted with TFM PTFE main seal.
NOTE : The Firesafe specification ball valve is not
suitable for a Lethal Service application. The Lethal
Service specification ball valve is suitable for both a
Firesafe and a Lethal Service application.
Options - left hand or right hand operated. 1", 2" and 3"
Firesafe/Lethal Service ball valves available.
Specification
Range
Weight
Design Pressure (MAWP)
Test Pressure
Min. Design Temperature
Max. Design Temperature
4.77 Kgs
16 Bar (232 PSI)
24 Bar (348 PSI)
-40°C (-40°F)
205°C (401°F)
Part No.
Description
310/5000FSL
310/5000FSR
310/5000LSL
1” Firesafe Ball Valve – left hand
1” Firesafe Ball Valve – right hand
1” Lethal Service/Firesafe Ball Valve –
left hand
1” Lethal Service/Firesafe Ball Valve –
right hand
310/5000LSR
Approved to : BS EN14432, EN12516-2, EN10497,
API 607.
Fitting Details
Ø24.5
Ø24.5
Example shown : 310/5000XXR
INLET & OUTLET FLANGE
DRILLED 4 x Ø18.0 HOLES
EQUI-SPACED ON A 89.0 PCD
20.0
82.8
191.0
83.8
124.0
Ø123.5
© Fort Vale Engineering Ltd. 2014
Page 26
BALL029 REV00-05.11.14
1" Firesafe / Lethal Service
Ball Valve
®
Data
Parts drawing
1
2
3
4
5
6
7
8
9
Item
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
M10 locking nut *See Note
M10 locking washer (pair)
Handle *See Note
12mm Belleville washer (2)
Stuffing gland
Bearing bush
Gland seal
Stuffing gland
Perfluoroelastomer o ring
M6 cap screw
2” ball valve body *See Note
TFM PTFE ball seal (2)
Ball *See Note
Body seal
Seal retainer
3mm ball (2)
Plunger spring (2)
Spindle
Bottom bearing
5112-008-XX
5113-191
310/0125XX
5113-045
310/3458
310/3443
310/0133
310/0130
5005-212PER
5111-034
310/5010XX
310/0102FS
370/1002XX
310/0106GR
310/0176/2
10154SS
370-3469
310/0120FS
310/0104FS
10
Note : Part number varies according to specification.
11
12
13
12
14
15
19
18
17
16
© Fort Vale Engineering Ltd. 2014
Page 27
BALL030 REV00-05.11.14
2" Firesafe / Lethal Service
Ball Valve
®
Data
2" Full Bore Firesafe / Lethal Service Ball Valve - inlet and
outlet flange drilled 8 x 19mm holes equi-spaced on a
127mm PCD (2" ASA 300). Contact parts manufactured
in 316 stainless steel fitted with TFM PTFE main seal.
NOTE : The Firesafe specification ball valve is not
suitable for a Lethal Service application. The Lethal
Service specification ball valve is suitable for both a
Firesafe and a Lethal Service application.
Options - left hand or right hand operated. 1", 2" and 3"
Firesafe/Lethal Service ball valves available.
Specification
Range
Weight
Design Pressure (MAWP)
Test Pressure
Min. Design Temperature
Max. Design Temperature
10.3 Kgs
16 Bar (232 PSI)
24 Bar (348 PSI)
-40°C (-40°F)
205°C (401°F)
Part No.
Description
370/5000FSL
370/5000FSR
370/5000LSL
2” Firesafe Ball Valve – left hand
2” Firesafe Ball Valve – right hand
2” Lethal Service/Firesafe Ball Valve –
left hand
2” Lethal Service/Firesafe Ball Valve –
right hand
370/5000LSR
Approved to : BS EN14432, EN12516-2, EN10497,
API 607.
Associated Parts
Part No.
Description
5005-724SP
Stainless steel/graphite spiral wound
gasket – suits 2” ball valve inlet & outlet
Fitting Details
Example shown : 370/5000XXR
Ø49.5
Ø49.5
2-OFF 5005-724SP
SUPPLIED SEPARATE
12.0
Ø101.8 STD SERRATIONS
108.8
INLET & OUTLET FLANGE DRILLED
8 X Ø19.0 HOLES EQUI-SPACED ON
A 127.0 PCD (2" ASA 300)
1.2
45°
21.7
23.5
124.1
190.5
Ø165.1
Ø165.1
© Fort Vale Engineering Ltd. 2014
Page 28
BALL033 REV00-06.11.14
2" Firesafe / Lethal Service
Ball Valve
®
Data
Parts drawing
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Item
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
M10 locking nut *See Note
M10 plain washer
Handle
16mm Belleville washer (3)
Stop pin *See Note
M6 cap screw (3) *See Note
M6 spring washer (4)
Retaining gland *See Note
Bearing bush
Wave spring
Stuffing gland
Gland seal
Stuffing gland
Perfluoroelastomer o ring
2” ball valve body *See Note
TFM PTFE ball seal (2)
Ball *See Note
Body seal
Seal retainer
Bottom bearing
Spindle
Plunger spring
3mm ball
5112-008-XX
5113-009
370/0125
5113-038
370/3442-XX
5111-108-XX
5113-008
370/3449XX
370/3443
370/3457
370/3458
370/3353
370/3459
5005-216PER
370/5001XX
370/0102FS
370/3301XX
370/0106GR
370/5003
370/0104FS
370/0120FS
370-3469
10154SS
Note : Part number varies according to specification.
16
17
18
19
20
21
22
23
© Fort Vale Engineering Ltd. 2014
Page 29
BALL034 REV00-06.11.14
®
2" Firesafe Ball Valve
Data
2" Full Bore Firesafe Ball Valve - inlet and outlet flange
drilled 4 x 18mm holes equi-spaced on a 125mm PCD.
Contact parts manufactured in 316 stainless steel fitted
with TFM PTFE main seal.
NOTE : This Firesafe specification ball valve is not
suitable for a Lethal Service application.
Options - left hand or right hand operated. 1", 2" and 3"
Firesafe/Lethal Service ball valves available.
Specification
Range
Weight
Design Pressure (MAWP)
Test Pressure
Min. Design Temperature
Max. Design Temperature
7.64 Kgs
16 Bar (232 PSI)
24 Bar (348 PSI)
-40°C (-40°F)
205°C (401°F)
Approved to : BS EN14432, EN12516-2, EN10497,
API 607.
Part No.
Description
370/0100FSL
370/0100FSR
2” Firesafe Ball Valve – left hand
2” Firesafe Ball Valve – right hand
Associated Parts
Part No.
Description
5005-724SP
Stainless steel/graphite spiral wound
gasket – suits 2” ball valve inlet & outlet
Fitting Details
108.8
Example shown : 370/0100FSR
Ø102.1
Ø49.5
Ø49.5
2-OFF 5005-724SP
SUPPLIED SEPARATE
INLET & OUTLET FLANGE
DRILLED 4 X Ø18.0 HOLES
EQUI-SPACED ON A 125.0 PCD
20.3
45°
18.0
82.4
190.5
Ø165.0
Ø165.0
© Fort Vale Engineering Ltd. 2014
Page 30
BALL031 REV01-05.11.14
®
2" Firesafe Ball Valve
Data
Parts drawing
1
2
3
4
5
6
7
8
9
10
11
12
Item
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
M10 locking nut
M10 washer
Handle
16mm Belleville washer (3)
Stop pin
M6 cap screw (3)
M6 spring washer (4)
Retaining gland
Bearing bush
Wave spring
Stuffing gland
Gland seal
Stuffing gland
Perfluoroelastomer o ring
2” ball valve body
TFM PTFE ball seal (2)
Ball
Body seal
Seal retainer
Bottom bearing
Spindle
Plunger spring
3mm ball
5112-008
5113-009
370/0125
5113-038
370/3442
5111-108
5113-008
370/3449
370/3443
370/3457
370/3458
370/3353
370/3459
5005-216PER
370/0110FS
370/0102FS
370/3301
370/0106GR
370/0176/2
370/0104FS
370/0120FS
370-3469
10154SS
13
14
15
16
17
18
19
20
21
22
23
© Fort Vale Engineering Ltd. 2014
Page 31
BALL032 REV00-09.04.14
3" Firesafe / Lethal Service
Ball Valve
®
Data
3" Full Bore Firesafe / Lethal Service Ball Valve - inlet and
outlet flange drilled 8 x 18mm holes equi-spaced on a
160mm PCD. Contact parts manufactured in 316
stainless steel fitted with TFM PTFE main seal.
NOTE : The Firesafe specification ball valve is not
suitable for a Lethal Service application. The Lethal
Service specification ball valve is suitable for both a
Firesafe and a Lethal Service application.
Options - left hand or right hand operated. 1", 2" and 3"
Firesafe/Lethal Service ball valves available.
Specification
Range
Weight
Design Pressure (MAWP)
Test Pressure
Min. Design Temperature
Max. Design Temperature
17.0 Kgs
16 Bar (232 PSI)
24 Bar (348 PSI)
-40°C (-40°F)
205°C (401°F)
Approved to : BS EN14432, EN12516-2, EN10497,
API 607.
Part No.
Description
360/5000FSL
360/5000FSR
360/5000LSL
3” Firesafe Ball Valve – left hand
3” Firesafe Ball Valve – right hand
3” Lethal Service/Firesafe Ball Valve –
left hand
3” Lethal Service/Firesafe Ball Valve –
right hand
360/5000LSR
Associated Parts
Part No.
Description
5005-630SP
Stainless steel/graphite spiral wound
gasket – suits 3” ball valve inlet & outlet
Fitting Details
Example shown : 360/5000XXR
INLET & OUTLET FLANGE
DRILLED 8 HOLES Ø18.0
EQUI-SPACED ON A 160.0 PCD
22.5°
Ø75.5
Ø140.0 STD SERRATIONS
BOTH SIDES
Ø75.5
2-OFF 5005-630SP
SUPPLIED SEPARATE
21.8
25.7
121.0
482.7
121.0
Ø200.0
Ø209.0
© Fort Vale Engineering Ltd. 2014
Page 32
BALL035 REV00-04.11.14
3" Firesafe / Lethal Service
Ball Valve
®
Data
Parts drawing
1
2
3
4
5
6
7
8
9
10
11
12
Item
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
M12 locking nut *See Note
M12 washer
Handle
20mm Belleville washer (3)
M6 cap screw (7) *See Note
M6 spring washer (6)
Retaining gland *See Note
Bearing bush
Wave spring
Stuffing gland
Gland seal
Stuffing gland
Perfluoroelastomer o ring
3” ball valve body *See Note
TFM PTFE ball seal (2)
Ball *See Note
Body seal
Seal retainer
Bearing bush
Spindle
3mm ball
Plunger spring
5112-007-XX
5123-003
360/3416FS
5113-041
5111-015-XX
5113-008
360/5005XX
360/0182
360/3351
360/0180
360/3353
360/0181
5005-928HT
360/5014XX
360/3402FS
360/3401XX
360/0106GR
360/0176/2
360/3421FS
360/3422FS
10154SS
370-3469
Note : Part number varies according to specification.
13
14
15
16
17
18
19
20
21
22
© Fort Vale Engineering Ltd. 2014
Page 33
BALL036 REV00-04.11.14
Page 34
THIS PAGE IS INTENTIONALLY BLANK
®
Fort Vale UK
Head Office & Manufacturing Plant
Tel : +44 (0)1282 687120
Fax : +44 (0)1282 687110
Email : [email protected]
Fort Vale USA
Tel : +1 281 471 8100
Fax : +1 281 471 8116
Email : [email protected]
Fort Vale Netherlands
Tel : +31 (0)180 483333
Fax : +31 (0)180 410797
Email : [email protected]
Fort Vale Russian Federation
Tel : +7 916 682 0947
Email : [email protected]
All goods supplied will be subject to Fort Vale Engineering Ltd Terms and Conditions of Sale (Ref. FV4) which
are available upon request, or may be viewed at www.fortvale.com.
Please note that this brochure and the contents herein remain the property of Fort Vale Engineering Limited.
This brochure may not be copied or reproduced, or the information contained herein divulged to any third party without the
prior written permission of Fort Vale Engineering Limited.
Repair/refurbishment/resetting of Fort Vale valves may be carried out only by trained and authorised personnel. Fort Vale
Engineering Limited shall not, in any circumstances, be liable for injuries, losses, expenses or damage, direct or
consequential, sustained by the buyer or any person which may in any degree be attributable to the adoption, either by the
buyer or any third party, of technical or other information, data or advice given on behalf of Fort Vale Engineering Limited or
however otherwise caused in relation to the use of its products in accordance with Fort Vale Engineering Limited’s
recommendation.
The specifications included in this catalogue are intended to be generic and must be interpreted as equivalent or
functionally equivalent. The identification of many items is facilitated by illustrations (photographs and line drawings). The
mention of, or reference to specific companies, national standards, or trade names, including those that might appear on
the photographs, is intended for illustration purposes only. It does not imply an endorsement, preference or availability of
any specific standard, brand or supplier.
The data and information contained herein is being provided for information only and without responsibility, and Fort Vale
Engineering Limited makes no representations or warranties, either expressed or implied, as to the accuracy,
completeness, or fitness for a particular purpose. Fort Vale Engineering Limited does not accept any responsibility or
liability with regard to the reliance on, or use of this data and information.
© Fort Vale Engineering Ltd. 2017
REV09_15.03.17
Fort Vale P.R. China
Tel : +86 21 6442 1367
Fax : +86 21 6442 1376
Email : [email protected]
Fort Vale Singapore
Tel : +65 6515 9950
Fax : +65 6515 3034
Email : [email protected]
Fort Vale Australia
Tel : +61 7 3310 4854
Email : [email protected]
www.fortvale.com