Multi-point Lock Maintenance Guide
for E-Series/Eagle® Hinged Patio Doors
Thank you for choosing Andersen.
For questions call 1-888-888-7020. For more information and/or guides visit eaglewindow.com
Please leave this guide with building owner.
▶▶ Read guide from beginning to end before starting maintenance procedure. Read all warnings and cautions during unit maintenance.
▶▶ For information, calculating, and design pressure ratings for E-Series/Eagle windows and doors go to
www.eaglewindow.com/Wintelligence®/Design-Pressure-Estimator.aspx
▶▶ Check with your local building code official to identify and confirm compliance with local building code requirements.
Supplies Needed
(1) Dry or Teflon® based spray lubricant
(1) Clean, dry cloth
Dry or Teflon® spray lubricant
Inswing patio shown throughout guide.
Use caution when working at elevated heights and around unit openings.
Follow manufacturers’ instructions for ladders and/or scaffolding. Failure
to do so may result in injury or death.
Follow instructions of spray lubricant manufacturer regarding
safety, material application and compatibility with this product.
"Teflon®" is a registered trademark of E.I. du Pont de Nemours and Company. “Andersen”, “Eagle” and all other marks where denoted are trademarks of Andersen Corporation and its subsidiary. ©2012 Andersen Corporation. All rights reserved.
9 0 6 9 1 9 1 BA
Revised 11/07/12
1
2
Interior
Interior
Top and Bottom Latches
(retracted position)
Rotate
Handle down
Latch
(retracted position)
Top and Bottom Latches
(retracted position)
®
based spray lubricant
Latch (retracted position)
Open door and hold handle down retracting all locking latches.
®
lubricant as shown.
3
4
Interior
Interior
based spray
Dead bolt thumb latch
Dead bolt
(extended position)
Rotate
Handle up
and down
Rotate handle up and down to work lubricant into latch housing.
Extend dead bolt to the locked position using dead bolt thumb latch,
and lubricate around dead bolt.
5
Interior
Dead bolt thumb latch
Dead bolt
Rotate dead bolt back and forth using dead bolt thumb latch to work lubricant into
dead bolt housing and wipe clean any lubricant overspray with a clean dry cloth.
▶ Multi-point lock maintenance procedure is complete.
9069191
2