Die protection System with Cam Controller
and Tonnage monitor
APS-MINI 10/4 P1 resp. P 2
Technical Features
How it works
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The die protection system protects your die from
both immediate and consequential damage.
Because the system can monitor the strip feed,
ejection of parts, double-layer sheet metal, and
fed parts, optimum protection can be ensured
for even the most complex punching tools. All
types of digital sensors like light barriers, inductive
encoders and tracing pins can be connected.
Programmable compact device
4 digital die protection inputs
10 free cams
1 or 2-channel press force
Measurement with piezo sensors
Integrated charge amplifier
Angular encoder in cast iron housing
Anti-shock bearings in angular encoder
2-line display (each line with 40 characters)
Ergonomic key pad
Integrated diode display
Extendable/retractable strips for labelling
Operating mode selection via softkeys
Programmable notebook
150 tools can be saved to memory
Software for stroke correction table
2 programmable part counters
Event display of control inputs
Event counting
Data back-up
Multistroke monitoring
Overload memory with date and time
Cam texts (option)
Optional language selection (option)
The cam controller transmits angle-dependent
electric signals for the die monitoring function and
for the feed, slides, cylinders, ejector, and blow-out
air using the following cam types:
- angle / angle, angle / time, advance-adjusted
- number / angle - angle (option)
- number / angle - time (option)
The press force measurement function monitors
the programmed maximum and minimum tonnage values. Envelope curve, teach-in and dynamic
limit functions are also available as options. The
absolute coded angular encoder provides the user
with position values.
Options
TDC switch-off, operational data logging and
communication with external feed systems.
APS-MINI 10/4 P1 - P 2
Technische Daten Power supply:
Ambient temp. range:
Humidity:
Contact load:
Signal encoder inputs:
Output signal relay:
Output signal transistor:
Serial interface:
Cam outputs:
Dimensions (WxHxD):
Weight:
Angular encoder:
24 V +/- 10% 60 V max.
0 - 40 °C
95% non-condensating
24 V / 1A press force, 24 V / 1.5A die protection
Die protection: 4 digital via sensor socket 15 V/24 V
2/4 piezo sensors
Ready for operation, encoder ok, die prot. ok, press force ok
P-switch: press force ok, no. of parts complete
RS 232 for data back-up, cam texts, error messages
6 or 10 each with 24 V/2A with external supply
340 mm x 360 x mm x 265 mm
With housing 16.5 kg / without housing 6.5 kg
BCD code, resolution 1 degree
APS MINI 10/4 P1 1011 0205 0000
Programmable compact device, 10 cams
4 sensor inputs, 1-channel press force
APS MINI 10/4 P2 1011 0206 0000
Programmable compact device, 10 cams
4 sensor inputs, 2-channel press force
6000 2001 0000
Absolute angular encoder WG1 in cast iron housing, 1 degree resolution,
2 cogged wheels and 1 toothed belt (distance between wheels 230 mm)
6410 8521 0000
Connector cable for angular encoder, length 5 m
6420 1020 0000
Sensor socket, incl. 4 plugs, APS WZD
6410 3002 0000
Cable for connecting die socket, length 2.5 m
5001 0101 0000
2 or 4 press force sensors JZT 127 each with 6 m cable
4913 0013
1 or 2 covers for press force sensors JZT 115C (left)
4913 0014
1 or 2 covers for press force sensors JZT 115C (right)
Order Information
Accessories
(also available separately)
Other accessories available upon request
UNiDOR GMBH • Freiburger Straße 3 • D-75179 Pforzheim
Tel.: (+49) 72 31 / 31 52 - 0 • Fax: (+49) 72 31 / 31 52 - 99 • [email protected]