Boot Toe Line
Boot Heel Line
2010/2011 Freeride Only - Orange Binding!!!
NTN FREERIDE MOUNTING TEMPLATE
100
30
48
28
40
52
WINDOW
Ski Tip
Ski Tip
WINDOW
5mm
WARNING: Print on 8.5”x11” paper.
Do Not Scale when printing. Must be printed at 100%.
Double/Triple check template scaling prior to use.
0
½
1
1½
2
2½
INCHES
0
10
20
30
40
50 60
MM
Control scale
Mounting Template Instructions
1. Place boot on ski, matching boot center mark on boot to center mark on ski.
2. Mark ski at boot toe and boot heel, these marks will line up with the boot toe or boot
heel lines on paper template.
3. Cut paper template ‘windows’; place windows and lines of template at appropriate
boot heel or boot toe lines. Heel piece is mounted relative to boot heel, toe piece is
mounted relative to boot toe. Zig-zagged line is to illustrate toe/heel are not related.
4. Tape paper template to ski, centering on ski and lining up with appropriate boot heel
or boot toe lines.
5. Double check the template is lined up with boot heel/toe lines and is centered on the
ski before drilling/marking binding holes.
6. Drill holes (3.6 x9 mm drill), mount and adjust the binding according to instructions.
7. Repeat on the next ski.