Voltage-Dependent Height Control Unit KHC4-PCS
Article number: .11.824.605
Height control unit for all high-precision plasma cutting applications. The KHC4PCS system provides all the essential functions that are needed for good cuts
and optimum utilisation of the work-piece.
 For all HiFocus and FineFocus applications
 Installation or retrofit possible on any guiding system for modernisation of
existing cutting workstations
 Integrated 3-dimensional collision protection
 Working load up to 12 kg
 Lifting 220 mm/option 350 mm
Features
 Accessories with modular design for easy combination
 New torch clamp with 3D collision protection with +/-17° deflection and
predetermined breaking point, optionally with intelligent collision detection
 Height adjustment in 0.1 mm steps guarantees a constantly high cutting
quality. Adjustment also possible via arc voltage.
 Exact height correction guarantees high cutting quality
 Adjustable weight compensation
 High work-piece utilisation by precise measuring the height close to kerfs and
edges
 Additional adjustable height increase during piercing increases the lifetime of
the nozzles
 Automatic kerf and edge detection increases the cutting quality
 Adjustable gas pre-flow for higher process speed
 Network-compatible with CUTBUS®
Linear Drive
Display and Control Unit
 Adjustment via Operator Terminal or via CNC control of the guiding system
 KCU 4 is the interface between height control plasma cutting unit and CNC control of the guiding
system
Kjellberg Connection Unit KCU 4 and
Operator Terminal
Our products represent a high level of quality and reliability. All technical data and designs are subject to change without prior notice.
This is based on our General Terms of Sale and Delivery.
Edition 12/11
Kjellberg Finsterwalde Plasma und Maschinen GmbH • Germany • D-03238 Finsterwalde • Leipziger Str. 82
Phone: +49 3531 500-0 • Fax: +49 3531 500-227 • E-Mail: [email protected] • Internet: www.kjellberg.de
Voltage-Dependent Height Control Unit KHC4-PCS
Article number: .11.824.605
Technical Data
KHC4-PCS (Linear Drive with Kjellberg Connection Unit KCU 4 and
Operator Terminal)
Working load
Lifting
max. Lifting speed
Torch clamp for torch diameter
Collision protection for torch
Operating voltage
Input plasma arc voltage
Piercing time
Weight
Dimensions
Up to 12 kg
220 mm Standard, 350 mm Option
80 mm/s
30-58 mm
 Deflection angle +/- 17° (force from front or back)
Deflection angle limited by hose parcel
(force from right or left)
 Predetermined breaking point to protect the torch
 Vertical collision protection (automatic torch lifting in
case of vertical deflection of the torch)
230 V AC/ 110V AC Auto Select Input
0 up to -300 V DC or 0 up to 10 V
0.2 – 5 s
9 kg (Linear Drive)
0.4 kg (Operator Terminal)
Linear Drive 400 x 125 x 128 mm (H x W x D)
(without guide bar)
Operator Terminal 120 x 160 x 35 mm (H x W x D)
Our products represent a high level of quality and reliability. All technical data and designs are subject to change without prior notice.
This is based on our General Terms of Sale and Delivery.
Edition 12/11
Kjellberg Finsterwalde Plasma und Maschinen GmbH • Germany • D-03238 Finsterwalde • Leipziger Str. 82
Phone: +49 3531 500-0 • Fax: +49 3531 500-227 • E-Mail: [email protected] • Internet: www.kjellberg.de