Sample preparation Stationary Sample Holders
Manually Prepared Powder
Samples
General powders
PW1811/16
16 mm  Powder Samples
PW1811/27
27 mm  Powder Samples
PW 1811/00
Aluminum Back Plate
Non-standard sample sizes and
shapes (1)
Solid samples
PW1812/00
Odd Shapes fixed with wax
or plasticine
Non-standard sample sizes and
shapes (2)
Coin fixed into
sample holder
with a small
amount of
plasticine
Automatically Prepared Powder
Samples
Pressed samples
PW1812/35
Steel Press Ring (cement etc.)
Circularly Shaped Solid Samples
(1)
Sample holder for Membrane filters, Metal plates, Pressed pellets
PW1813/26, 26 mm  Steel Ring
PW1813/32, 32 mm  Steel
Ring
PW1813/32, 40 mm  Steel
Ring
Circularly Shaped Solid Samples
(2)
Spring-loaded sample mounting
Powder sample pressed in
PW1526/50 Aluminum cup
Pressed Samples
Glass Capillary or Fiber Sample
Glass capillary mounted with plasticine on a Si
support plate
Small Amounts of Powder
Small amount of powder sprinkled onto a
PW1817/32 Si support plate
PW1817/32 for small amount
of powder and low
background measurements.
Clay Minerals and Paste-like
Materials
Sample holder with support plate and spring
PW1814/32 32 mm 
Sample Holder for
PW1817/32 and PW1816/32
Clay Minerals
PW1816/32 Ceramic plate for clay slurry
Paste-like Materials
PW1817/32 Si support plate used as zerobackground holder