MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
PAGE NUMBER: 1
DATE: 9/20/05
Authorized By:
Assembly Instructions:
3317283 KIT-MFGENG SHDN DSL
M&FS SWA
Pages 1-16
P:\ISO 9001 2000\Work Instructions\Assembly\Options\ARMADILLO SWEEPER OPTIONS\10X ARMADILLO SWEEPER OPTIONS
AY25 Rev 1
MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
PAGE NUMBER: 2
DATE: 9/20/05
3316178
3316175
Brown wire
Get (1) HARNESS-ENG SHUTDOWN
ARMA (3316178) and (1) SWITCHMURPHY SHUTDOWN ARMA (3316175)
with package of connectors and hardware
included. On side of switch as shown, use
double connector in package to connect first
two terminals on right side. Connect White
wire on right side, Brown wire second from
right and Blue wire third from right. Use
screws in package to secure ring connectors
to terminals. Tighten.
White wire
Double connector
Blue wire
Parts:
3316178 / 3316175
Tools:
Flat-Blade Screwdriver
MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
PAGE NUMBER: 3
DATE: 9/20/05
Turn switch over. Connect Black wire
to “G” ground terminal on right.
Connect Red wire to “B” battery
terminal on left. Secure wires to
terminals with screws from hardware
package. Tighten.
Black wire
Red wire
Tools:
Flat-Blade Screwdriver
MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
PAGE NUMBER: 4
DATE: 9/20/05
Drill 3/8” hole in console next to driver’s seat, as shown.
Apply decal included with switch to hole, as shown. Insert
switch button through hole from inside console as shown at
right. Secure with nut included with switch. Tighten.
Tools:
½” Wrench
MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
PAGE NUMBER: 5
DATE: 9/20/05
3316220
Get (1) BOOT-COVER MURPHY SWITCH (3316220)
and apply on switch button as shown. Secure with
included nut. Tighten.
Parts:
3316220
Tools:
½” Wrench
MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
PAGE NUMBER: 6
DATE: 9/20/05
3302267
Parts:
3302267
Tools:
Wire Cutters
Run HARNESS-ENG SHUTDOWN ARMA forward from inside
console, as shown at left, following existing hoses and harnesses
through firewall. Secure to existing hoses and harnesses with (8)
TIES-WIRE 8.00 IN. (3302267). Tighten ties and cut off excess
ends.
MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
PAGE NUMBER: 7
3303253
DATE: 9/20/05
3500226
Red and Black wires
Run Red and Black wires from harness forward through firewall, as shown above left. Cut 2’ of WIRE-16 AWG RED
(3500226). Strip one end and install (1) TERMINAL-MALE SPADE (3303253). Plug male spade terminal into female
terminal on Red wire, as shown above right.
Parts:
3500226 / 3303253
Tools:
Wire Terminal Tool / Crimper / Wire Cutters
MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
PAGE NUMBER: 8
DATE: 9/20/05
3400710
Run Red wire across fire wall, under wire ties securing
existing cables and hoses, to fuse panel, as shown at left.
Strip end of wire and install (1) TERMINAL-FEMALE 1416 GA INSUL (3400710), as shown above.
Parts:
3400710
Tools:
Wire Terminal Tool / Crimper / Wire Cutters
MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
PAGE NUMBER: 9
DATE: 9/20/05
3400255
Black wire
Red wire
3300445
Plug Red wire into fuse panel, second from top on left, as shown above left. Plug (1) FUSE-30 AMP (3300445) into fuse
panel, opposite Red wire. Install (1) TERMINAL-RING 14-16 WIRE #10 (3400255) on end of Black wire from
HARNESS-ENG SHUTDOWN ARMA. Remove bolt in firewall with existing ground wire, as shown above right, and add
ring terminal with Black wire to bolt. Replace bolt, secure with existing nut and tighten.
Parts:
3300445 / 3400255
Tools:
Wire Terminal Tool / Crimper / Wire Cutters / 7/16” Wrench
MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
PAGE NUMBER: 10
DATE: 9/20/05
Blue wire
3315539
Red wire
Pull Blue and White wires from HARNESS-ENG SHUTDOWN ARMA over into engine compartment. Cut Blue wire and
install (1) CONNECTOR-NYL INS BUTT 16/22GA (3315539). Strip end of Red wire from existing engine wire harness
and crimp in other end of CONNECTOR-NYL INS BUTT, as shown above right, connecting Blue wire to Red wire.
Parts:
3315539
Tools:
Wire Terminal Tool / Crimper / Wire Cutters
MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
PAGE NUMBER: 11
DATE: 9/20/05
Disconnect hose from end of air cleaner for access, as
shown at left. If necessary, bend lift ring on end of engine
out of way, as shown at left. Remove bolt from top of
engine next to air cleaner, as shown above right.
Tools:
5/16” Nut Driver / Adjustable Wrench
12mm Socket / Ratchet Extension
Air Ratchet
MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
PAGE NUMBER: 12
3313288
DATE: 9/20/05
Get (1) SWITCH-WATER TEMP SHUTDOWN KBA (3313288). Apply pipe
dope to threads. Insert switch into engine where bolt was removed. Tighten.
Parts:
3313288
Tools:
Thread Sealant / 9/16” Deep Well Socket / Extension / Ratchet
MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
PAGE NUMBER: 13
DATE: 9/20/05
White wire
3400710
Strip end of White wire from HARNESS-ENG
SHUTDOWN ARMA and install (1) TERMINALFEMALE 14-16 GA INSUL (3400710), as shown above.
Plug white wire into post on top of SWITCH-WATER
TEMP SHUTDOWN KBA, as shown at bottom right.
Parts:
3400710
Tools:
Wire Terminal Tool / Crimper / Wire Cutters
MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
Vaporizer switch
3400261
PAGE NUMBER: 14
DATE: 9/20/05
3304040
3334348
Disconnect wire and remove vaporizer switch from engine.
Apply pipe dope to threads of (1) FTG-HOSE BARB 1/4
MPT TO 3/8 (3400261) and screw into (1) FTG-BRASS
TEE (3334348). Screw fittings into engine and tighten.
Screw vaporizer switch into one side of FTG-BRASS TEE.
Screw (1) SWITCH-OIL PRESSURE SW 75 (3304040)
into other side of FTG-BRASS TEE. Tighten with pliers.
Parts:
3400261 / 3334348 / 3304040
Tools:
Thread Sealant / 9/16” Wrench /
Wirecutters / Pliers / Electrical Tape
White wire
Cut off end of White wire in HARNESS-ENG SHUTDOWN
ARMA at end of conduit, as shown above. Secure White
wire inside conduit with electrical tape, as shown below.
MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
PAGE NUMBER: 15
DATE: 9/20/05
3400710
Brown wire
Reconnect Red wire to vaporizer switch, as shown at right.
Install (1) TERMINAL-FEMALE 14-16 GA INSUL
(3400710) on end of Brown wire from HARNESS-ENG
SHUTDOWN ARMA and plug into end of SWITCH-OIL
PRESSURE SW 75, as shown at right.
Red wire
Parts:
3400710
Tools:
Wire Terminal Tool / Crimper
MODEL: 3317283 KIT-MFG-ENG SHDN DSL M&FS SWA
DOCUMENTED BY: John Myers
PAGE NUMBER: 16
DATE: 9/20/05
3302267
Parts:
3302267
Tools:
5/16” Nut Driver / Wire Cutters
Reconnect hose clamps and hose on air cleaner and tighten, as
shown at top left. Use (3) TIES-WIRE 8.00 IN. (3302267) to secure
HARNESS-ENG SHUTDOWN ARMA on both sides of engine.