SIMPLY THE BEST
CONSISTENCY. INERTNESS. VALUE.
NEW Agilent A-Line vials
Continuous innovation in glassware enables superior analytical
performances and greater laboratory outcomes.
A-LINE
LUCKY
Introducing Agilent A-Line vials: The trusted choice for your
precious samples and high precision analyses
VIAL
GAME
• Save hours of time: Dramatically reduce the number of sample reruns.
• Get higher throughput: Surface inertness reduces peak response variability for more
accurate results and less rework.
• Attain consistent recoveries: Be confident you’re getting the most precise and
consistent measurement from vial-to-vial, lot-to-lot, and over time, of low-level analytes.
Over $50,000 USD† in prizes—
including our Grand Prize:
2,000 A-Line vials*
• Spend less: Save up to 25% on your laboratory spend by significantly reducing unplanned
costs (such as troubleshooting, reruns, and downtime).
To claim your prize code, visit
• Conform with demanding and regulated environments: Our Certification of Analysis
provides specific data confirming vial appropriateness.
www.agilent.com/chem/luckyvial
For more prize codes, look for game
tickets inside packs of Agilent columns
and supplies.
• Easily manage inventory: A-Line vials are designed to fit a variety of caps,
including 2 mL autosampler caps.
For a comparison of A-Line vials performance data against Waters TruView
and Thermo MS Certified Vials, as well as ordering and promotion information,
visit www.agilent.com/chem/vialsresources
Euro 47 000 / GBP 40 000 / CNY 345 000 / JPY 5 700 000 /
CHF 50 000 / SGD 71 000 / CAD 65 000 / AUD 66 000
*Restrictions apply.
Please go to www.agilent.com/chem/luckyvial for rules and a
complete list of prizes.
†
Think all vials are created equal? Think again
The truth is, substandard vials can lead to problems such as
sample loss, contamination, and damaged autosampler needles.
A-Line vials are exclusively manufactured using first hydrolytic
type 1 borosilicate glass with a 51 coefficient of expansion
(COE) providing the most inertness. Tight quality controls and
production procedures ensure narrowest vial-to-vial, lot-to-lot
and over time performance variability.
Certified integrity and consistency
Only Agilent Certified Vials are shipped
with a certificate confirming that they
are produced in an ISO 9001 certified
environment, and manufactured/
packaged to reduce contamination. We also certify that our
vials are pierce tested with Agilent needles and syringes,
inspected with automated vision systems, and compatible
with autosampler gripping and injection mechanisms.
Agilent A-Line vials: Better analyte retention over time
Agilent
A-Line Vials
Counts
x103 +ESI TIC SRM
5
Waters TruView
(LC/GC) Vials
x103 +ESI TIC SRM
5
Thermo MS Certified
(LC/GC) Vials
3
x10 +ESI TIC SRM
5
4
4
4
3
3
3
2
2
2
1
1
1
0
0.25 0.3 0.35 0.4 0.45
0
0.25 0.3 0.35 0.4 0.45
0
0.25 0.3 0.35 0.4 0.45
Acquisition Time [min]
PP t0
t0
t4
t12
t48
Agilent A-Line vial shows superior analyte retention in this separation of doxepin.
Note: Tests were carried out by Agilent.
Ordering information
Description
Part Number
A-Line screw top vial, 2 mL, clear, with write-on spot, 100/pk
5190-9589
A-Line screw top vial, 2 mL, amber, with write-on spot, 100/pk
5190-9590
A-Line crimp top vial, 2 mL, clear, with write-on spot, 100/pk
5190-9591
A-Line crimp top vial, 2 mL, amber, with write-on spot, 100/pk
5190-9592
Recommended caps for A-Line vials:
Description
Part Number
Screw cap, bonded, blue, PTFE/white silicone septa, 100/pk
5190-7021
Screw cap, bonded, blue, pre-slit, PTFE/white silicone septa, 100/pk 5190-7023*
Crimp cap, silver aluminum, PTFE/white silicone septa, 100/pk
Don’t settle for less than the best
Choose the right vial for your application at
www.agilent.com/chem/selectvials
5182-0552
*Recommended for high volume injections
For Research Use Only. Not for use in diagnostic procedures.
This information is subject to change without notice.
© Agilent Technologies, Inc. 2017
Published in USA, February 16, 2017
5991-7717EN