Bulletin
Mutual recognition of general
construction induction training cards
This information bulletin provides a guide to mutual recognition of interstate general construction induction
training cards (White Card).
A white card that was issued under a corresponding WHS law (and remains valid) will be recognised under
Regulation 319 of the Work Health and Safety (National Uniform Legislation) Regulations.
The White Cards listed in this bulletin are examples of interstate cards that are valid in the Northern Territory.
The examples in this bulletin may not be comprehensive, please contact the interstate authority if you wish to
confirm the validity of an interstate card.
It is important to note the following:


Mutual recognition is of White Cards only and does not extend to mutual recognition by jurisdictions of
trainers or the delivery of training
A person conducting a business or undertaking (PCBU) must ensure that task induction and site–
specific induction training is undertaken as required under Regulation 39 of the Work Health and Safety
(National Uniform Legislation) Laws.
Tasmania
Tasmanian white cards are recognised by NT WorkSafe. The card must include the following information:


Issue date and card number
Name, date of birth and signature of the cardholder.
Queensland
Queensland white cards are recognised by NT WorkSafe. The cards must include the following information:


Issue date, card number and RTO number
Name, date of birth and signature of the cardholder.
Queensland blue cards continue to be valid and recognised in Queensland, therefore these cards are also
recognised by NT WorkSafe. The cards must include the following information:


Issue date, card number and RTO name/number
Name and signature of the cardholder.
South Australia
South Australian white cards are recognised by NT WorkSafe. The card must include the following information:


Issue date and card number
Name, date of birth and signature of the cardholder.
2
Mutual recognition of general construction induction training cards (V3.0 – October 2016)
Australian Capital Territory
ACT white cards are recognised by NT WorkSafe. The cards must include the following information:


Issue date, card number and RTO number
Name, date of birth and signature of the cardholder.
Caption: Sample ACT construction induction card (from 1 January 2012)
Caption: Sample ACT construction induction card (1 September 2009 – 31 December 2011)
Western Australia
Western Australia white cards are recognised by NT WorkSafe. The cards must include the following
information:


Issue date and card number
Name and signature of the cardholder.
3
Mutual recognition of general construction induction training cards (V3.0 – October 2016)
Western Australian (CSAT) cards were issued by the WorkSafe Western Australia Commission for
Occupational Safety and Health. These cards are also recognised by NT WorkSafe. The cards must include
the following information:


Issue date and card number
Name and signature of the cardholder.
Victoria
Victorian white cards are recognised by NT WorkSafe. The cards must include the following information:


Issue date and card number
Name, date of birth and signature of the cardholder.
Victorian red cards issued prior to 1 July 2008 are recognised by NT WorkSafe. The cards must include the
following information:


Issue date, card number and name of RTO/Training Provider
Name and signature of the cardholder.
4
Mutual recognition of general construction induction training cards (V3.0 – October 2016)
New South Wales
NSW white cards are recognised by NT WorkSafe. The cards must include the following information:


Issue date, card number and RTO number
Name, date of birth and signature of the cardholder.
Caption: Sample NSW construction induction card (from 1 January 2012)
Caption: Sample NSW construction induction card (1 September 2009 – 31 December 2011)
Caption: Sample NSW construction induction card (29 March 2004 – 31 August 2009)
Contact us
For further information please contact us on 1800 019 115, facsimile (08) 8999 5141, via email at
[email protected] or go to the NT WorkSafe website at www.worksafe.nt.gov.au
5
Mutual recognition of general construction induction training cards (V3.0 – October 2016)