ENGINEER’S MEET
2017 AT ASTHA MIDWAY,
KRISHNANAGAR
THE LEGACY THROUGH THE AGES
Purulia Metal Casting Private Limited (PMC) was established in 2004 with a vision of “Building
India” and dream of creating value for society at large.
PMC is a registered brand under the ISO 9001-2008 segment and has been the phenomenal
creators of the best quality steel for the Indian mass market since the last few years.
A reputed company now in name and fame, this brand has established
and carved a niche for itself amongst the biggest steel brands that are aiming at creating a
stronger and tougher India.
VISION
PASSION in delivering the best quality first
and fore most, every time.
EXCELLENCE at adopting the latest cutting
edge technology that helps our
customers, partners and associates to
derive maximum value from our products
and services.
HONESTY in conducting the business.
TEAMWORK that empowers and
encourages individuals to think
collectively and deliver the best for the
best results.
SUSTAINABLE GROWTH that serves
needs of the country, customers and
community at large.
DELIVERING VALUES - THE POWER OF STEEL
 Today PMC’s chain of products range from mild steel billets to reinforcement
Thermex TMT bars.
 Branded as PMC PRESTIGE THERMEX TMT BARS, the TMT products are
made with the best cutting edge technology available.
DELIVERING VALUES - THE POWER OF STEEL
 The TMT range of products are
certified with Thermex TMT
technology from
HEENISGSDORFER STAHL
ENGINEERING GmbH,
Germany
 The dedicated team of the best
steel workers in the company
ensures that the production
quantity of the TMT products
range from 120000 TPA TMT
bars and is ISO 9001-2008
certified by DNV
OUR REACH
1. PMC PRESTIGE TMT is
already marketed in the
state of West Bengal,
Jharkhand,Bihar,Haryana,
Delhi.Orrisa.
2. PMC PRESTIGE TMT is
distributed through a 400
+ strong dealer base.
3. Working with various
Govt. projects and Pvt.
reality groups.
PMC PRESTIGE FE-550D
The Production Process
PMC PRESTIGE FE-550D
The ultimate product of the latest German technology
 The quality process begins with the
selection of high quality billets produced
from the state of the art 2strand
continuous casters.
 Steel billets of 125mm are heated at the
state of the art plants to more than 1100
degree Celsius in a re-heating furnace.
 The process of quenching helps produce
a high quality strength bar from
inexpensive low carbon steel.
 After the last rolling stand, the product
moves through a quench pipe which
converts the bar’s surface layer to
martensite and causes it to shrink.
PMC PRESTIGE FE-550D
(cont.)
The ultimate product of the latest German technology

The shrinkage pressurizes the core, helping
to form the requisite micro-structure. The
core remains hot and austenitic.

A microprocessor controls the water flow to
the quench pipe to manage the temperature
difference through the cross-section of the
bars. The correct temperature difference
assures the process requirements for bars
to have the necessary mechanical
properties.

As the bar cools, heat flows from the bar’s
centre to its surface so that the heat and
pressure correctly temper to form an
intermediate ring of martensite and bainite.
PMC PRESTIGE FE-550D
(cont.)
The ultimate product of the latest German technology

Shrinkage technology helps the TMT bars to gain
strength at the core.

Superb quality control and superior team work
ensures that the final product is the best in quality.

Finally, the slow cooling after quenching
automatically tempers the austenitic core to ferrite
and pearlite on the cooling bed.

These bars, therefore, exhibit a variation in
microstructure, having strong tempered martensite in
the surface layer of the bar, an intermediate layer of
martensite and bainite, and a refined, tough and
ductile ferrite and pearlite core.
QUALITY AT THE CORE OF FE550D

PMC’s quality department applies a strict
procedure of inspection along the entire process
cycle, starting with detailed inspection of raw
material to final inspection of finished products and
strict supervision of the process all through out.

The quality control department ensures that the
manifestation of the good quality re-bars consist of:
 A tempered outer ring of martensite
 A semi-tempered middle ring of martensite
and bainite
 A mild circular core of bainite, ferrite and
pearlite

The consistent product quality achieved by PMC
PRESTIGE is regarded highly by customers.
QUALITY AT THE CORE OF FE550 D (Cont.)

PMC PRESTIGE Thermex Fe550D TMT Bar undergo
several tests at various stages of production.

During the process, series of samples are taken for
testing in PMC’s own laboratory where the latest
equipment and techniques are used to verify chemical
and physical composition as well as mechanical
properties.

Test results are fed back to the plant immediately for
any adjustments required.

Final quality check is conducted before dispatching to
customers and necessary test certificates are issued
as a testimony to meet customers’ quality
requirements.
PRODUCT SPECIFICATIONS
FEW WORDS ABOUT OUR BRAND AMBASSADOR AND
OUR MASS COMMUNICATION
Prof. Sanjoy Sadhukhan
Associate Professor
Dept. of Metallurgy and Materials Engineering,
Bengal Engineering and Science University, Shibpur
1. He is in the profession of teaching as well as
pursuing research in field of steel for more than
twenty years.
2. During his visit to our plant, he checked the layout
design, manufacturing method, quality control
process and parameters, technology, stock yard,
and pollution control system of our manufactured
brand. After careful inspection he accepted our
proposal to became the brand ambassador of our
product with approval of BESUS.
3. He strongly feels that a persons in the profession of
steel can only speak for the quality of steel he is
endorsing.
THE FUTURE AWAITS
1. Planning to launch in states of
Kerala,Karnataka.
2. We are further looking at export
opportunities for our brand.
3. Planning to increase our capacity
from 0.2 million to 0.5 million
TPA.
4. Going to invest around Rs.300
5. crores in the near future and will
get established as an integrated
plant for achieving excellence in
quality.
6. This expansion will be carried out
in a max of two phases.
Rs.1000 Cr.
Investment in the process
LIST OF OUR DEALERS
UPPER BIRBHUM
NAME
STATION
Nirman Kendra
Murarai
D.N.Hardware
Hiyatnagar
Bappa Hardware
Nalhati
United Steel
Nalhati
G.L.Enterprise
Rampurhat
Bijoy Hardware
Rampurhat
Nur Hardware
Rampurhat
CELL NO.
9775385355
9564970356
9434583372
9735894397
9153575230
9851994478
9732047783
LIST OF OUR DEALERS
UPPER BIRBHUM
NAME
STATION
Hasan Hardware Rampurhat
Kabari Hardware Rampurhat
Jupitor Hardware Rampurhat
Loknath Traders
Sainthia
Karunasindhu H/W Chandpara
Kashi Traders
Suri
Disha Hardware
Jhilli
CELL NO.
9153439586
9614692281
7586952331
9734073151
9932263605
9732040211
9732194051
SCHEME FOR TECHNICAL
EXECUTIVES
QUANTITY
UNIT
TOTAL UNIT
3MT
35MT
SEMI.WASH.MCIN/180LIT
REFREEZERATOR
5MT
60MT
SLR CAMERA/GANTOK
TRIP(SINGLE PERSON)
8MT
95MT
DOUBLE DOOR
REFREEZERATOR/LAPTOP(H
P)
10MT
120MT
32INCH LED
Thank you