SAFECOM Radio Networks - Bosch Security Systems

Intrusion Alarm Systems | SAFECOM Radio Networks
SAFECOM Radio Networks
www.boschsecurity.com
The SAFECOM Network infrastructure provides a
means of reporting alarm events to a central station
for monitoring. Communications between the
protected premises and the central station is
accomplished in one of two ways:
1.
2.
Direct from the protected premises to the central
station with an omni-directional network.
From the protected premises, to a SAFECOM
repeater, then to the central station.
The SAFECOM repeater is normally located on a
communications tower, mountaintop or tall building
overlooking the area to be serviced. Repeater sites are
given one of the following classifications: schemed or
non-schemed. A schemed site makes use of a "master
antenna system" to which all radio repeaters on the
site are connected (through a multi-coupler/
combiner). A non-schemed site requires the
installation of a new antenna dedicated solely to the
SAFECOM repeater.
Notice
The "V" at the end of a SCNET designator
indicates the system operates in the VHF
frequency band (typically 136 to 174 MHz).
Without the "V," the network is defined as using
radios that operate in the UHF frequency band
(typically 400 to 512 MHz).
The actual number used for ordering includes a "-XX"
suffix. The "-XX" is a two-character designator that
defines the specific frequency pair used by the system
(e.g., SCNET-D3). A frequency designator is assigned
for each SAFECOM system frequency pair.
The SAFECOM expansion systems are used to expand
the coverage area of a network or provide a second RF
path for UL Listed fire protection without telephone
line backup.
Parts included
The following chart is a listing of major components
and assemblies contained in each of the SAFECOM
Network (SCNET) and SAFECOM System (SCSYS)
packages.
UHF Radio Networks
SCNET-XX Radio Network
UHF, UL Listed, omni-directional, radio network. Twoway radio communications with remotes are
accomplished through an omni-directional antenna at
the central monitoring station. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
2 | SAFECOM Radio Networks
Quantit
y
Component
1
D6690 SAFECOM Line Card
1
D6695 SAFECOM Line Termination Card
1
SC9002 SAFECOM UL Listed Printer
1
SC9020 Lightning Surge Suppressor
1
UL Listed Configuration
2
IT1500 RF tester
2
RF2000 Radio Modem
2
SC9016 25-Pin Transient Serial Line Surge Protector
SCNET1-XX Radio Network
UHF, UL Listed, radio network with one UL nonschemed repeater. Two-way radio communications
with remotes are accomplished through a SAFECOM
repeater system at a non-schemed location. Requires
two SAFECOM RF Hardware kits (SCRFHDyy) and two
SC900 Series antennas.
1
UL Listed Configuration
2
IT1500 RF Tester
2
RF2000 Radio Modem
2
SC9016 25-Pin Transient Serial Line Surge Protector
SCNET4-XX Radio Network
UHF, non-UL Listed, omni-directional radio network.
Two-way radio communications with remotes are
accomplished through an omni-directional antenna at
the central monitoring station. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Quantit
y
Component
1
SC9016 25-Pin Transient Serial Line Surge Protector
1
SC9020 Lightning Surge Suppressor
2
RF2000 Radio Modem
2
IT1500 RF Tester
SCNET5-XX Radio Network
UHF, non-UL Listed, radio network with one nonschemed repeater. Two-way radio communications
with remotes are accomplished through a SAFECOM
repeater system at a non-schemed location. Requires
two SAFECOM RF Hardware kits (SCRFHDyy) and two
SC900 Series antennas.
Quantit
y
Component
1
D6690 SAFECOM Line Card
1
D6695 SAFECOM Line Termination Card
1
SC801 Non-schemed Repeater
1
SC820 Spare Repeater
1
SC9002 SAFECOM UL Listed Printer
Quantit
y
Component
1
SC9020 Lightning Surge Suppressor
1
SC801 Non-schemed Repeater
1
UL Listed Configuration
1
SC820 Spare Repeater
2
IT1500 RF Tester
1
SC9020 Lightning Surge Suppressor
2
RF2000 Radio Modem
2
IT1500 RF Tester
2
SC9016 25-Pin Transient Serial Line Surge Protector
2
RF2000 Radio Modem
2
SC9016 25-Pin Transient Serial Line Surge Protector
SCNET2-XX Radio Network
UHF, UL Listed, radio network with one UL schemed
repeater. Two-way radio communications with remotes
are accomplished through a SAFECOM repeater
system at a schemed location. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Quantit
y
Component
SCNET6-XX Radio Network
UHF, non-UL, radio network with one schemed
repeater. Two-way radio communications with remotes
are accomplished through a SAFECOM repeater
system at a schemed location. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
1
D6690 SAFECOM Line Card
Quantit
y
Component
1
D6695 SAFECOM Line Termination Card
1
SC802 Schemed Repeater
1
SC802 Schemed Repeater
1
SC820 Spare Repeater
1
SC820 Spare Repeater
1
SC9020 Lightning Surge Suppressor
1
SC9002 SAFECOM UL Listed Printer
2
IT1500 RF Tester
1
SC9020 Lightning Surge Suppressor
3 | SAFECOM Radio Networks
2
RF2000 Radio Modem
2
SC9016 25-Pin Transient Serial Line Surge Protector
SCSYS-XX Radio Network Expansion System
UHF, UL Listed, omni-directional add-on for the central
station. Includes an RF2000 Radio Modem. Requires
one SAFECOM RF Hardware kit (SCRFHDyy) and one
SC900 Series antenna.
Quantit
y
Component
1
RF2000 Radio Modem
1
D6690 SAFECOM Line Card
1
D6695 SAFECOM Line Termination Card
1
SC9020 Lightning Surge Suppressor
1
UL Listed Configuration
2
SC9016 25-Pin Transient Serial Line Surge Protector
SCSYS1-XX Radio Network Expansion System
UHF, UL Listed, add-on non-schemed repeater.
Includes an RF2000 Radio Modem. Requires two
SAFECOM RF Hardware kits (SCRFHDyy) and two
SC900 Series antennas.
VHF, UL Listed, omni-directional, radio network. Twoway radio communications with remotes are
accomplished through an omni-directional antenna at
the central monitoring station. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Quantit
y
Component
1
D6690 SAFECOM Line Card
1
D6695 SAFECOM Line Termination Card
1
SC9002 SAFECOM UL Listed Printer
1
SC9020 Lightning Surge Suppressor
1
UL Listed configuration
2
IT1500V RF Tester
2
RF2000V Radio Modem
2
SC9016 25-Pin Transient Serial Line Surge Protector
SCNET1V-XX Radio Network
VHF, UL Listed, radio network with one UL nonschemed repeater. Two-way radio communications
with remotes are accomplished through a SAFECOM
repeater system at a non-schemed location. Requires
two SAFECOM RF Hardware kits (SCRFHDyy) and two
SC900 Series antennas.
Quantit
y
Component
1
D6690 SAFECOM Line Card
D6695 SAFECOM Line Termination Card
Quantit
y
Component
1
1
RF2000 Radio Modem
1
D6690 SAFECOM Line Card
1
SC801 Non-schemed Repeater
1
D6695 SAFECOM Line Termination Card
1
SC9020 Lightning Surge Suppressor
1
SC801V Non-schemed Repeater
2
SC9016 25-Pin Transient Serial Line Surge Protector
1
SC720 Spare Repeater
SCSYS2-XX Radio Network Expansion System
UHF, UL Listed, add-on schemed repeater. Includes an
RF2000 Radio Modem. Requires one SAFECOM RF
Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
1
SC9002 SAFECOM UL Listed Printer
1
SC9020 Lightning Surge Suppressor
1
UL Listed Configuration
2
IT1500V RF Tester
Quantit
y
Component
2
RF2000V Radio Modem
1
D6690 SAFECOM Line Card
2
SC9016 25-Pin Transient Serial Line Surge Protector
1
D6695 SAFECOM Line Termination Card
1
RF2000 Radio Modem
1
SC802 Schemed Repeater
1
SC9020 Lightning Surge Suppressor
2
SC9016 25-Pin Transient Serial Line Surge Protector
VHF Radio Networks
SCNETV-XX Radio Network
SCNET2V-XX Radio Network
VHF, UL Listed, radio network with one UL schemed
repeater. Two-way radio communications with remotes
are accomplished through a SAFECOM repeater
system at a schemed location. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Quantit
y
Component
1
D6690 SAFECOM Line Card
4 | SAFECOM Radio Networks
1
D6695 SAFECOM Line Termination Card
1
SC802V Schemed Repeater
1
SC720 Spare Repeater
1
SC9002 SAFECOM UL Listed Printer
1
SC9020 Lightning Surge Suppressor
1
UL Listed Configuration
2
IT1500V RF Tester
2
RF2000V Radio Modem
2
SC9016 25-Pin Transient Serial Line Surge Protector
SCNET4V-XX Radio Network
VHF, non-UL Listed, omni-directional radio network.
Two-way radio communications with remotes are
accomplished through an omni-directional antenna at
the central monitoring station. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Quantit
y
Component
1
SC720 Spare Repeater
1
SC802V Schemed Repeater
1
SC9020 Lightning Surge Suppressor
2
IT1500V RF Tester
2
RF2000V Radio Modem
2
SC9016 25-Pin Transient Serial Line Surge Protector
SCSYSV-XX Radio Network Expansion System
VHF, UL Listed, omni-directional add-on for the central
station. Includes an RF2000 Radio Modem. Requires
one SAFECOM RF Hardware kit (SCRFHDyy) and one
SC900 Series antenna.
Quantit
y
Component
1
D6690 SAFECOM Line Card
Quantity
Component
1
D6695 SAFECOM Line Termination Card
1
SC9016 25-Pin Transient Serial Line Surge Protector
1
RF2000V Radio Modem
1
SC9020 Lightning Surge Suppressor
1
SC9020 Lightning Surge Suppressor
2
IT1500V RF Tester
1
UL Listed Configuration
2
RF2000V Radio Modem
2
SC9016 25-Pin Transient Serial Line Surge Protector
SCNET5V-XX Radio Network
VHF, non-UL Listed, radio network with one nonschemed repeater. Two-way radio communications
with remotes are accomplished through a SAFECOM
repeater system at a non-schemed location. Requires
two SAFECOM RF Hardware kits (SCRFHDyy) and two
SC900 Series antennas.
SCSYS1V-XX Radio Network Expansion System
VHF, UL Listed, add-on non-schemed repeater.
Includes an RF2000 Radio Modem and an D6691
DATACOM Line Expansion Card. Requires two
SAFECOM RF Hardware kits (SCRFHDyy) and two
SC900 Series antennas.
Quantit
y
Component
1
D6690 SAFECOM Line Card
Quantit
y
Component
1
SC720 Spare Repeater
1
D6695 SAFECOM Line Termination Card
1
SC801V Non-schemed Repeater
1
RF2000V Radio Modem
1
SC9020 Lightning Surge Suppressor
1
SC801V Non-schemed Repeater
2
IT1500V RF Tester
1
SC9020 Lightning Surge Suppressor
2
RF2000V Radio Modem
2
SC9016 25-Pin Transient Serial Line Surge Protector
2
SC9016 25-Pin Transient Serial Line Surge Protector
SCSYS2V-XX Radio Network Expansion System
VHF, UL Listed, add-on schemed repeater. Includes an
RF2000 Radio Modem. Requires one SAFECOM RF
Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
SCNET6V-XX Radio Network
VHF, non-UL, radio network with one schemed
repeater. Two-way radio communications with remotes
are accomplished through a SAFECOM repeater
system at a schemed location. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Quantit
y
Component
1
D6690 SAFECOM Line Card
1
D6695 SAFECOM Line Termination Card
5 | SAFECOM Radio Networks
1
RF2000V Radio Modem
1
SC802V Schemed Repeater
1
SC9020 Lightning Surge Suppressor
2
SC9016 25-Pin Transient Serial Line Surge Protector
Ordering information
SCNET‑XX Radio Network
UHF, UL Listed, omni-directional, radio network. Twoway radio communications with remotes are
accomplished through an omni-directional antenna at
the central monitoring station. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Order number SCNET-XX
SCNET1‑XX Radio Network
UHF, UL Listed, radio network with one UL nonschemed repeater. Two-way radio communications
with remotes are accomplished through a SAFECOM
repeater system at a non-schemed location. Requires
two SAFECOM RF Hardware kits (SCRFHDyy) and two
SC900 Series antennas.
Order number SCNET1-XX
SCNET2‑XX Radio Network
UHF, UL Listed, radio network with one UL schemed
repeater. Two-way radio communications with remotes
are accomplished through a SAFECOM repeater
system at a schemed location. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Order number SCNET2-XX
SCNET4‑XX Radio Network
UHF, non-UL Listed, omni-directional radio network.
Two-way radio communications with remotes are
accomplished through an omni-directional antenna at
the central monitoring station. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Order number SCNET4-XX
SCNET5-XX Radio Network
UHF, non-UL Listed, radio network with one nonschemed repeater. Two-way radio communications
with remotes are accomplished through a SAFECOM
repeater system at a non-schemed location. Requires
two SAFECOM RF Hardware kits (SCRFHDyy) and two
SC900 Series antennas.
Order number SCNET5-XX
SCNET6‑XX Radio Network
UHF, non-UL, radio network with one schemed
repeater. Two-way radio communications with remotes
are accomplished through a SAFECOM repeater
system at a schemed location. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Order number SCNET6-XX
SCNETV‑XX Radio Network
VHF, UL Listed, omni-directional, radio network. Twoway radio communications with remotes are
accomplished through an omni-directional antenna at
the central monitoring station. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Order number SCNETV-XX
SCNET1V‑XX Radio Network
VHF, UL Listed, radio network with one UL nonschemed repeater. Two-way radio communications
with remotes are accomplished through a SAFECOM
repeater system at a non-schemed location. Requires
two SAFECOM RF Hardware kits (SCRFHDyy) and two
SC900 Series antennas.
Order number SCNET1V-XX
SCNET2V‑XX Radio Network
VHF, UL Listed, radio network with one UL schemed
repeater. Two-way radio communications with remotes
are accomplished through a SAFECOM repeater
system at a schemed location. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Order number SCNET2V-XX
SCNET4V‑XX Radio Network
VHF, non-UL Listed, omni-directional radio network.
Two-way radio communications with remotes are
accomplished through an omni-directional antenna at
the central monitoring station. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Order number SCNET4V-XX
SCNET5V‑XX Radio Network
VHF, non-UL Listed, radio network with one nonschemed repeater. Two-way radio communications
with remotes are accomplished through a SAFECOM
repeater system at a non-schemed location. Requires
two SAFECOM RF Hardware kits (SCRFHDyy) and two
SC900 Series antennas.
Order number SCNET5V-XX
6 | SAFECOM Radio Networks
SCNET6V‑XX Radio Network
Accessories
VHF, non-UL, radio network with one schemed
repeater. Two-way radio communications with remotes
are accomplished through a SAFECOM repeater
system at a schemed location. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
SC911‑XX UHF Antenna
UHF (410 MHz to 490 MHz), 10.4 dB Gain, 6 m (20 ft.)
Open Dipole.
Order number SC911-XX
SC911V‑XX VHF Antenna
Order number SCNET6V-XX
VHF (136 MHz to 174 MHz), 6.7 dB Gain, 7 m (22 ft.)
Open Dipole.
SCSYS‑XX Radio Network Expansion System
Order number SC911V-XX
UHF, UL Listed, omni-directional add-on for the central
station. Includes an RF2000 Radio Modem. Requires
one SAFECOM RF Hardware kit (SCRFHDyy) and one
SC900 Series antenna.
UHF (400 MHz to 520 MHz), 6.6 dB Gain, 3 m (10 ft.)
Open Dipole.
Order number SCSYS-XX
SCSYS1‑XX Radio Network Expansion System
SC912‑XX UHF Antenna
Order number SC912-XX
SC912V‑XX VHF Antenna
UHF, UL Listed, add-on non-schemed repeater.
Includes an RF2000 Radio Modem. Requires two
SAFECOM RF Hardware kits (SCRFHDyy) and two
SC900 Series antennas.
VHF (136 MHz to 174 MHz), 3 dB Gain, 3 m (10 ft.)
Open Dipole.
Order number SCSYS1-XX
UHF (400 MHz to 520 MHz), 10 dB Gain, 7 m (22 ft.)
Collinear.
SCSYS2‑XX Radio Network Expansion System
Order number SC912V-XX
SC913‑XX UHF Antenna
UHF, UL Listed, add-on schemed repeater. Includes an
RF2000 Radio Modem. Requires one SAFECOM RF
Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Order number SC913-XX
Order number SCSYS2-XX
Order number SC913V-XX
SCSYSV‑XX Radio Network Expansion System
VHF, UL Listed, omni-directional, radio network. Twoway radio communications with remotes are
accomplished through an omni-directional antenna at
the central monitoring station. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Order number SCSYSV-XX
SCSYS1V‑XX Radio Network Expansion System
VHF, UL Listed, radio network with one UL nonschemed repeater. Two-way radio communications
with remotes are accomplished through a SAFECOM
repeater system at a non-schemed location. Requires
two SAFECOM RF Hardware kits (SCRFHDyy) and two
SC900 Series antennas.
SC913V‑XX VHF Antenna
VHF (136 MHz to 174 MHz), 6 dB Gain, 7 m (22 ft.)
Collinear.
SC914‑XX UHF Antenna
UHF (400 MHz to 520 MHz), 7 dB Gain, 4 m (13 ft.)
Collinear.
Order number SC914-XX
SC914V‑XX VHF Antenna
VHF (136 MHz to 174 MHz), 3 dB Gain, 3 m (10 ft.)
Collinear.
Order number SC914V-XX
SC915‑XX UHF Antenna
UHF (400 MHz to 520 MHz), 10 dB Gain, Yagi
(directional).
Order number SC915-XX
SC915V‑XX VHF Antenna
Order number SCSYS1V-XX
VHF (136 MHz to 174 MHz), 9.5 dB Gain, Yagi
(directional).
SCSYS2V‑XX Radio Network Expansion System
Order number SC915V-XX
VHF, UL Listed, radio network with one UL schemed
repeater. Two-way radio communications with remotes
are accomplished through a SAFECOM repeater
system at a schemed location. Requires one SAFECOM
RF Hardware kit (SCRFHDyy) and one SC900 Series
antenna.
Order number SC921-XX
Order number SCSYS2V-XX
Order number SC921V-XX
SC921‑XX UHF Antenna
½ wave rubber duck, UHF 400 to 520 MHz.
SC921V‑XX VHF Antenna
½ wave rubber duck, VHF 136 to 174 MHz.
RF Hardware A1 Kit with 15 m (50 ft) Cable
1.3 cm (½ in.) RF Cable
Order number SCRFHDA1
7 | SAFECOM Radio Networks
RF Hardware A2 Kit with 31 m (100 ft) Cable
1.3 cm (½ in.) RF Cable
Order number SCRFHDA2
RF Hardware A3 Kit with 61 m (200 ft) Cable
1.3 cm (½ in.) RF Cable
Order number SCRFHDA3
RF Hardware B1 Kit with 31 m (100 ft) Cable
2.2 cm (7/8 in.) RF Cable
Order number SCRFHDB1
RF Hardware B2 Kit with 46 m (150 ft) Cable
2.2 cm (7/8 in.) RF Cable
Order number SCRFHDB2
RF Hardware B3 Kit with 61 m (200 ft) Cable
2.2 cm (7/8 in.) RF Cable
Order number SCRFHDB3
RF Hardware B4 Kit with 76 m (250 ft) Cable
2.2 cm (7/8 in.) RF Cable
Order number SCRFHDB4
RF Hardware C1 Kit with 76 m (250 ft) Cable
3.2 cm (1 ¼ in.) RF Cable
Order number SCRFHDC1
RF Hardware C2 Kit with 99 m (325 ft) Cable
3.2 cm (1 ¼ in.) RF Cable
Order number SCRFHDC2
RF Hardware C3 Kit with 122 m (400 ft) Cable
3.2 cm (1 ¼ in.) RF Cable
Order number SCRFHDC3
Represented by:
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
[email protected]
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
[email protected]
www.boschsecurity.com
© Bosch Security Systems 2013 | Data subject to change without notice
2673008139 | en, V1, 01. Oct 2013
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
[email protected]
www.boschsecurity.asia
China:
America Latina:
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
201 Building, No. 333 Fuquan Road
Via Anhanguera, Km 98
North IBP
CEP 13065-900
Changning District, Shanghai
Campinas, Sao Paulo, Brazil
200335 China
Phone: +55 19 2103 2860
Phone +86 21 22181111
Fax: +55 19 2103 2862
Fax: +86 21 22182398
[email protected]
www.boschsecurity.com.cn
www.boschsecurity.com