Dr. Praveen Ailawalia Father’s Name: Sh. J R Ailawalia Mother’s Name: Saroj Bala H-No. 17-C, Rani Bagh Ambala Cantt, Haryana -133001 Telephone: (Res.) INDIA+0171+2652117 /(Mobile) 094661-50117 Email: [email protected], [email protected] Date of Birth: December 21, 1974 M.Sc., Ph. D (Mathematics) , 14+ Years experience in Engineering College/University. Key Skills: Experience of teaching Mathematics to B. Tech, M. Tech, M. Sc. and M. Phil.(Mathematics) classes. Job Objective: Teaching Total Years of Experience: 14+ years. Education Ph. D (Maths) from Kurukshetra University in 2007. M. Sc (Maths) from Kurukshetra University in 1998 with 72.4% marks. Graduation from Kurukshetra University in 1996 with 54.5% marks. 10+2 form CBSE in 1992 with 70.8% marks. Matric from CBSE in 1990 with 71.0% marks. 1 Summary of Skills and Experience I have done my Post Graduation (Mathematics) in 1998 and Ph. D (Mathematics) in 2007 from Kurukshetra University. I have more than 14 years teaching experience in reputed Engineering colleges and Universities. I have 68 research papers published in reputed National/International journals. I have also presented my research papers in national and international conferences. Experience (i) 17th August 2012-Present as Professor and 11th November 201116th August 2012 as Associate Professor at “Baddi University of Emerging Sciences and Technology, Baddi, District Solan(H.P). (ii) 1st June 2009 – 10th Nov. 2011 as Professor at “Surya School of Engineering and Technology”, Bapror, NH 1, Rajpura, District Patiala, Punjab. (iii) 30th July 2008 – 30th May 2009 as Assistant Professor at “M.M Engineering College, Maharishi Markandeshwar University”, Mullana, Ambala, Haryana. (iv) 7th August 2006 - 29th July 2008, as Assistant Professor at “ RIMT Institute of Engineering and Technology”, Mandi Gobindgarh, Distt. Fatehgarh Sahib, Punjab. (v) 31st July 2004 – 30th June 2006, as Senior lecturer at “Institute of Engineering and Emerging Technologies”, Baddi, Distt. Solan, H.P. (vi) 23rd November 1998 - 30th July 2004, as Lecturer at “Sri Sukhmani Institute of Engineering and Technology”, DeraBassi, Distt. Mohali, Punjab. Secondary Duties performed 1. Head of Department (Applied Sciences). 2. Superintendent and Deputy Superintendent (External Exams). 3. Timetable convener. 2 4. Discipline incharge. 5. Organised blood donation camps. 6. Convener-Sports Committee. 7. Member, Board of studies, M. M University, Mullana. 8. Designed syllabus for PG (M. Phil and M. Sc.) classes. 9. Paper setter, Kurukshetra University, HP University, Shimla., Punjab Agriculture University, Ludhiana., M. M University, Mullana. Research Activities: a) Title of Ph. D thesis: Micropolar elastic deformation due to different sources. b) No. of students guided Ph. D : Three (03) b) No. of students guiding Ph. D : Four (04) c) No. of students guided M. Phil: Two (02) d) Papers published/accepted in International Journals: 57 (List Attached) e) Research Papers published in National Journals: 11(List Attached) (e) Research Papers presented in conferences: 13 (List Attached) Member- Editorial Board (i) Journal of Mathematical Sciences and Applications, USA. Research Reviewer (i) “Asian European Journal of Mathematics”, China. (ii) “Meccanica”, Italy. (iii) “Nano-Micro Letters”, China. (iv) “Mechanics of Advanced Materials and Structures”, USA. (v) “International Journal of Heat and Mass Transfer”, USA. (vi) “Earth, Moon and Planets”, Germany. (vii) “Multidiscipline Modeling in Materials and Structures”, China. (viii) “Mathematical Problems in Engineering”, USA. 3 (ix) “Bulletin Calcutta Mathematical Society”, India. (x) “SGI reflections – International Journal of Science, Technology and Management”, India. Books Written (i) “Engineering Mathematics(Punjab), Vol. 1” (Ist Edition) jointly with Dr. A. K. Gupta, Ajay Publishers, July 2007. (ii) “Numerical Methods in Engineering” (2nd Edition) jointly with Dr. A. K. Gupta, Ajay Publishers, July 2008. (iii) “Engineering Mathematics(Haryana), Vol. 1” (Ist Edition) jointly with Dr. Deepak Gupta, Ajay Publishers, July 2008. (iv) “Engineering Mathematics(Haryana), Vol. 2” (Ist Edition) jointly with Dr. Deepak Gupta, Ajay Publishers, January 2009. (v) “Polytechnic Mathematics(Haryana), Vol. 2” (Ist Edition) jointly with Dr. Deepak Gupta, Ajay Publishers, January 2009. (vi) “First course in Engineering Mathematics, Vol. 1”(1st Edition) jointly with Anju Sood and Sumeet Goyal(ISBN 81-909831-7-2), Ajay Publishers, July 2011. (vii) “First course in Engineering Mathematics, Vol. 2(Ist Edition) jointly with Anju Sood and Sumeet Goyal (ISBN 81-909831-8-0), Ajay Publishers, January 2012. Short-term courses attended (i) Attended short term course on “Setting of Question papers” from 12 Jan 2004-16 Jan 2004 held at S.S.I.E.T, DeraBassi and conducted by National Institute of Technical Teachers Training and Research, Chandigarh. (ii) Attended short-term course on “Curriculum Implementation” from 09 Feb 2004-12 Feb 2004 held at S.S.I.E.T, DeraBassi and conducted by National Institute of Technical Teachers Training and Research, Chandigarh. Summer/Winter Schools attended 4 (i) Attended summer school on “Effective Curriculum Implementation” from 14th Sep 2009-18th Sep 2009 at “Indo global College of Engineering”, Mohali conducted by National Institute of Technical Teachers Training and Research, Chandigarh. Membership of professional bodies (i) Life member- ISTE, (ii) Life member- Punjab Science Academy Any other information: I was selected as Lecturer at Choudhary Devi Lal University, Sirsa (Haryana) in July 2007. References (i) Dr. B.S. Sohi Retd. Director (UIET, Chandigarh) H. No. 1135, Sector 42-B, Chandigarh E-mail: [email protected] Phone: +9194170-47914 (ii) Dr. A K Saihjpal Former Director, University institute of Applied Management Studies Former Director, Centre for Industry-Institute Partnership Programme, Panjab University, H. No. 1162, Sector 15, Panchkula, Haryana, India Phone:+91-98155-66664 E-mail: [email protected] (iii) Dr. M S Grewal Director, Chandigarh University, Gharaun Mohali, Punjab Phone: +91-98142-21213 E-mail: [email protected] 5 (Dr. Praveen Ailawalia) Date: Dr. Praveen Ailawalia Research publications a) Papers published/accepted in International Journals (1) “Moving load response at thermal conducting fluid and Micropolar solid interface”. International Journal of Applied Mechanics and Engineering(Poland), Vol. 8(2003), No. 4, 621-636. [Impact factor: 1.6] Jointly with Rajneesh Kumar. (2) “Steady state response to moving load at fluid/micropolar solid interface”. Seminar of I Vekua Institute of Applied Mathematics REPORTS(Georgia), Vol. 30(2004), 6-16. Jointly with Rajneesh Kumar. (3) “Moving load response of Micropolar elastic half space with voids”. Journal of Sound and Vibration(UK), Vol. 280(2005), 837-848. [Impact factor: 1.414] Jointly with Rajneesh Kumar. (4) “Behaviour of Micropolar cubic crystal due to various sources”. Journal of Sound and Vibration(UK), Vol. 283(2005), 875-890. [Impact factor: 1.414] Jointly with Rajneesh Kumar. (5) “Effects of viscosity with moving load at micropolar boundary surface”. International Journal of Applied Mechanics and Engineering(Poland), Vol. 10 (2005), No. 1, 95-108. [Impact factor: 1.6] Jointly with Rajneesh Kumar. (6) “Interactions due to inclined load at micropolar elastic half-space with voids”. International Journal of Applied Mechanics and Engineering(Poland), Vol. 10 (2005), No. 1, 109-122. [Impact factor: 1.6] Jointly with Rajneesh Kumar. (7) “Moving inclined load at boundary surface”. Applied Mathematics and Mechanics(Republic of China), Vol. 26, No. 4(2005), 476-485. [Impact factor: 0.34] Jointly with Rajneesh Kumar. 6 (8) “Deformation in micropolar cubic crystal due to various sources”. International Journal of Solids and Structures(U.S.A) Vol. 42(2005), 59315944. [Impact factor: 1.809] Jointly with Rajneesh Kumar. (9) “Elastodynamics of Inclined loads in a micropolar cubic crystal”. Mechanics and Mechanical Engineering. (Poland), Vol. 9, No.2(2005), 5775. Jointly with Rajneesh Kumar. (10) “Interactions due to mechanical/thermal sources in thermoelastic micropolar medium possessing cubic symmetry”. International Journal of Solids and Structures(U.S.A), Vol. 43(2006), 2761-2798. [Impact factor: 1.809] Jointly with Rajneesh Kumar. (11) “Time harmonic sources at micropolar thermoelastic medium possessing cubic symmetry with one relaxation time”. European journal of Mechanics A/solids. Vol. 25(2006), 271-282. [Impact factor: 1.674] Jointly with Rajneesh Kumar. (12) “Interaction due to mechanical sources in micropolar cubic crystal”. International Journal of Applied Mechanics and Engineering(Poland),Vol. 11, No.2(2006), 337-357. [Impact factor: 1.6] Jointly with Rajneesh Kumar. (13) “Deformation due to time harmonic sources in micropolar thermoelastic medium possessing cubic symmetry with two relaxation times”. Applied Mathematics and Mechanics(Republic of China) Vol. 27, No. 6(2006), 781-792. [Impact factor: 0.34] Jointly with Rajneesh Kumar. (14) “Deformations due to mechanical sources in elastic solid with voids”. International Journal of Applied Mechanics and Engineering(Poland), Vol. 11, No.4(2006), 865-880. [Impact factor: 1.6] Jointly with Rajneesh Kumar. (15) “Deformation due to moving loads at boundary surface”. Science and Engineering of Composite Materials (Israel), Vol. 14(2007), 25-46. 7 Jointly with Rajneesh Kumar. (16) “Moving load response in micropolar thermoelastic medium without energy dissipation possessing cubic symmetry”. International Journal of Solids and Structures (USA), Vol. 44(2007), 4068-4078. [Impact factor: 1.809] Jointly with Rajneesh Kumar. (17) “Interactions due to time harmonic inclined load in micropolar thermoelastic medium possessing cubic symmetry without energy dissipation”. Science and Engineering of Composite Materials (Israel) Vol.14, No. 3(2007), 229-240. Jointly with Rajneesh Kumar. (18) “Inclined load in micropolar thermoelastic medium possessing cubic symmetry with one relaxation time”. Mechanics and Mechanical Engineering (Poland) Vol. 11, No. 1(2007), 129-157. Jointly with Rajneesh Kumar. (19) “Steady state response due to moving load at the free surface of micropolar cubic crystal”. International Journal of Applied Mechanics and Engineering (Poland) Vol. 12(2)(2007), 401-411. [Impact factor: 1.6] Jointly with Rajneesh Kumar. (20) “Mechanical/thermal sources at thermoelastic micropolar medium without energy dissipation possessing cubic symmetry”. International Journal of Thermophysics (USA) Vol. 28, No. 1(2007), 342-367. [Impact factor: 0.889] Jointly with Rajneesh Kumar. (21) “Elastodynamics of time harmonic inclined load in micropolar thermoelastic medium possessing cubic symmetry”. International Journal of Applied Mechanics and Engineering (Poland) Vol. 12, No.3 (2007), 629-644. [Impact factor: 1.6] Jointly with Rajneesh Kumar. (22) “Response of micropolar viscoelastic medium possessing cubic symmetry due to various sources”. International E Journal of Engineering 8 Mathematics: Theory and Applications(Egypt). Vol. 2(2007), 88-109. [Impact factor: 0.1] Jointly with Rajneesh Kumar. (23) “Interactions in micropolar thermoelastic medium with voids due to distributed loads" International Journal of Applied Mechanics and Engineering (Poland) Vol. 12, No. 4(2007), 989-1007. [Impact factor: 1.6] Jointly with Rajneesh Kumar. (24) “Thermo-viscous interactions in micropolar thermoviscoelastic medium possessing cubic symmetry”. Journal of Mechanical Behaviour of Materials Vol. 18(4) (2007), 217-242. Jointly with Rajneesh Kumar. (25) “Mechanical response at the interface of elastic half-space and micropolar elastic honeycomb due to different sources” International E Journal of Engineering Mathematics: Theory and Applications(Egypt). Vol. 3(1) (2008), 29-56. [Impact factor: 0.1] Jointly with Rajneesh Kumar. (26) “Viscous effects in micropolar cubic crystal” International E Journal of Engineering Mathematics: Theory and Applications(Egypt). Vol. 3(1) (2008), 110-132. [Impact factor: 0.1] Jointly with Rajneesh Kumar. (27) “Deformations in micropolar thermoelastic medium possessing cubic symmetry due to inclined loads”. Mechanics of Advanced Materials and Structures (U.S.A) Vol. 15(1) (2008), 64-76. [Impact factor: 0.734] Jointly with Rajneesh Kumar. (28) “ Effect of rotation due to moving load at the interface of elastic halfspace and generalized thermoelastic half-space”. International E Journal of Engineering Mathematics: Theory and Applications(Egypt) Vol. 5(2008), 5775. [Impact factor: 0.1] Jointly with Naib Singh Narah. 9 (29) “Effect of rotation due to various sources at the interface of elastic half-space and generalized thermoelastic half-space ”International Journal of Applied Mathematics and Mechanics” Vol. 5(1)(2009), 68-88. Jointly with Naib Singh Narah and Rajneesh Kumar. (30) “Influence of various sources in micropolar thermoelastic medium with voids” Structural Mechanics and Engineering” Vol. 31, No. 6, 717735(2009). [Impact factor: 0.5] Jointly with Rajneesh Kumar. (31) “Steady state and Time harmonic response in micropolar porous thermoelastic medium with two relaxation times”. Journal of Porous Media, Vol. 12(8), 791-800(2009). [Impact factor: 0.493] Jointly with Rajneesh Kumar. (32) “Deformation in a generalized thermoelastic medium with hydrostatic initial stress subjected to different sources”. Mechanics and Mechanical Engineering (Poland), Vol. 13(1) (2009), 5-24. Jointly with Sunit kumar and Gagandeep Khurana. (33) “Effect of rotation in a generalized thermoelastic medium with two temperature under the influence of gravity”. International Journal of Applied Mathematics and Mechanics, Vol. 5, No. 5, 99-116(2009). Jointly with Gagandeep Khurana and Sunit kumar. (34) “Effect of rotation in generalized thermoelastic solid under the influence of gravity with an overlying infinite viscous fluid.” Applied Mathematics and Mechanics(English Edition), Vol. 30(12) (2009), 15051518. [Impact factor: 0.34] Jointly with Naib Singh Narah. (35) “Effect of rotation in a generalized thermoelastic medium with hydrostatic initial stress subjected to ramp type heating and loading.” International Journal of Thermophysics, [Impact factor: 0.889] Jointly with Naib Singh Narah. 10 Vol. 30(2009), 2078-2097. (36) “Moving Load Response In a Rotating Generalized Thermoelastic Medium". Interaction and Multiscale Mechanics: An International Journal, Vol. 30(1)(2010), 81-94. Jointly with Naib Singh Narah. (37) “Time harmonic inclined load in micropolar thermoelastic medium possessing cubic symmetry with one relaxation time”. Tamkang Journal of Science and Engineering (Taiwan) Vol. 13(2) (2010), 117-126. (38) “Thermoelastic waves at an interface between two solid half-spaces under hydrostatic initial stress” Archives of Mechanics, Vol. 63(3) (2010), 177-193. [Impact factor: 0.993] Jointly with Baljeet Singh and Joginder Singh. (39) “Effect of rotation under the influence of gravity due to various sources in a generalized thermoelastic medium” Advances in Applied Mathematics and Mechanics, Vol. 2(6) (2010), 810-827. [Impact factor: 0.75] Jointly with Naib Singh Narah. (40) “Effect of rotation in a generalized thermoelastic medium with two temperature under hydrostatic initial stress and gravity” Multidiscipline Modeling in Materials and Structures, Vol. 6(2) (2010), 185-205. Jointly with Sunit Kumar and D S Pathania. (41) “Effects of moving load velocity and viscosity in a transversely isotropic piezoelectric medium”. International Journal of Applied Mathematics and Mechanics, Vol. 6(9) (2010), 19-33. Jointly with Gagandeep Khurana. (42) “Moving load response in a thermoelastic rotating medium with an overlying micropolar liquid saturated porous half-space.” International Journal of Applied Mathematics and Mechanics, Vol. 7(1) (2011), 82-101. Jointly with Naib Singh Narah. (43) "Effect of hydrostatic initial stress in Green-Naghdi(Type III) thermoelastic half-space subjected to Ramp type heating and loading." Journal of Technical Physics, Vol. 50(4) (2009), 403-415. 11 (44) “Effect of hydrostatic initial stress in generalized orthotropic thermoelastic half-space.” Journal of Technical Physics, Vol. 50(4) (2009), 417-431. Jointly with Shilpy Budhiraja. (45) “Effect of hydrostatic initial stress and rotation in Green-Naghdi(Type III) thermoelastic half-space with two temperature.” International Journal of Applied Mathematics and Mechanics, Vol.7(3), 93-110(2011). Jointly with Shilpy Budhiraja. (46) “Thermomechanical Deformation in Micropolar Porous Thermoelastic Material”. Mechanics of Advanced Materials and Structures (U.S.A), Vol. 18, issue 4 (2011), 255-261. [Impact factor: 0.734] Jointly with Rajneesh Kumar. (47) “Fibre-reinforced generalized thermoelastic medium under hydrostatic initial stress”, Engineering, Vol. 3(2011), 622-631. Jointly with Shilpy Budhiraja. (48) “Effects of Viscosity at the Interface of Viscous Fluid and Micropolar Elastic Honeycomb". Applied Mathematics & Information Sciences (U.S.A) Vol.5(3)(2011), 578-596. [Impact factor: 0.642] Jointly with Rajneesh Kumar. (49) “Steady state response at the interface of elastic half space and micropolar liquid-saturated porous half space”. Applied Mathematics & Information Sciences (U.S.A)(In Press). [Impact factor: 0.642] (50) “Steady state and time harmonic mechanical/thermal response in micropolar thermoelastic medium with voids”. International Journal of Material Sciences (Accepted). Jointly with Rajneesh Kumar. (51) “Effect of hydrostatic initial stress and rotation in Green-Naghdi (Type III) thermoelastic half-space”, Multidiscipline Modeling in Materials and Structures, Vol. 7(2) (2011), 131-145. Jointly with Shilpy Budhiraja and Baljeet Singh. 12 (52) “Dynamic Problem in Green-Naghdi(Type III) Thermoelastic Half-Space with two Temperature”, Mechanics of Advanced Materials and Structures(USA) (Accepted). [Impact factor: 0.734] Jointly with Shilpy Budhiraja and Amit Singla. (53) “Fibre-reinforced generalized thermoelastic medium under hydrostatic initial stress and rotation with temperature dependent properties” International Journal of Mathematical Archive, Vol. 2(12) (2011), 2740-2752. [Impact factor: 0.8] Jointly with Shilpy Budhiraja. (54) “Propagation of waves at an imperfectly bonded interface between two monoclinic thermoelastic half-spaces” Journal of Theoretical and Applied Mechanics Vol. 41(8) (2011), 101-116. Jointly with Joginder Singh and Baljeet Singh. (55) “Disturbance in generalized thermoelastic medium with internal heat source under hydrostatic initial stress and rotation.” International Journal of Mechanical Engineering and Technology, Volume 3(3) (2012), pp. 315-330. [Impact factor: 3.8071] Jointly with Shilpy Budhiraja. (56) “Internal heat source in Temperature rate dependent thermoelasticity using dual phase lag model” (Accepted). “International journal of Applied Mathematics and Mechanics”. Jointly with Shilpy Budhiraja. (57) “Temperature rate dependent thermoelasticity without energy dissipation(Type III) under hydrostatic initial stress and rotation” (Accepted) .”Multidiscipline Modelling in Materials and Structures”. Jointly with Shilpy Budhiraja. b) Research Papers published in National Journals (1) “Moving load response at elastic/Micropolar solid interface”. South East Asian Journal of Mathematics and Mathematical Sciences, Vol. 2, No. 2(2004), 67-82. 13 Jointly with Rajneesh Kumar. (2) “Interactions of moving load velocity at fluid/micropolar viscoelastic solid interface”. Bulletin of the Allahabad Mathematical Society, Vol. 19(2004), 35-48. Jointly with Rajneesh Kumar. (3) “Effects of fluid layer at micropolar orthotropic boundary surface”, Sadhana, Vol. 29, Part 6(2004), 605-616. [Impact factor: 0.276] Jointly with Rajneesh Kumar. (4) “Variations of moving load velocity at the boundary surface”. Proceedings of the National Academy of Sciences, 75(A), II(2005), 111120. Jointly with Rajneesh Kumar. (5) “Viscous effects at an orthotropic micropolar boundary surface”. Sadhana Vol. 30, Part 4(2005), 513-525. [Impact factor: 0.276] Jointly with Rajneesh Kumar. (6) “Influence of gravity in a rotating generalized thermoelastic medium with two temperature subjected to ramp type heating and loading”. Ultra Scientist for physical Sciences, Vol. 21(2) M(2009), 327-342. [Impact factor: 0.05] Jointly with Sunit kumar and Devinder Singh Pathania. (7) “Fuzzy flow shop problem on 2-machines with single transport facilityAn Heuristic approach”. Arya Bhatta Journal of Mathematics and Informatics, Vol. 1, No. 1-2 (2009), 38-46. Jointly with Sunita Gupta and T.P Singh. (8) “Wave reflection and refraction at an interface between two thermoelastic solid half-spaces under hydrostatic initial stress” Bulletin of the Allahabad Mathematical Society, Vol. 25, Part 2(2010), 247-264. Jointly with Baljeet Singh and Joginder Singh. (9) “Elastodynamics of Micropolar Thermoelastic Medium Possesing Cubic Symmetry without Energy Dissipation with an Overlying Non-Viscous Fluid”, SGI reflections – International Journal of Science, Technology and Management , Vol. 1(1)(2010), 89-104. 14 (10) “Effect of hydrostatic initial stress on wave propagation at the interface between two Green-Naghdi thermoelastic solid half-spaces”, Far East Journal of Applied Mathematics, Vol. 44(2) (2010), 85-107. [Impact factor: 0.816] Jointly with Baljeet Singh and Joginder Singh. (11) “Effect of hydrostatic initial stress and rotation in generalized orthotropic thermoelastic half-space under the influence of gravity”, Far East Journal of Applied Mathematics, Vol. 51(1) (2011), 1-25. [Impact factor: 0.816] Jointly with Shilpy Budhiraja. (c) Research Papers presented in conferences (1) National conference on Engineering Mathematics held on 6th-7th April 2001 at I.E.T, Bhaddal (Ropar). (2) National conference of the Vigyan Parishad of India on Applied and Industrial Mathematics held on 22nd-24th February 2002 at Netaji Subhash Institute of Technology, New Delhi. (3) National conference on Industrial Mathematics and Engineering Computation held on 28th-29th March 2003 at I.E.T, Bhaddal(Ropar). (4) 91st Session of Indian Science Congress held on 3rd-7th January 2004 at Panjab University, Chandigarh. (5) National conference on Recent Trends and Developments in Applied Sciences in Engineering and Technology held on 6th July 2006 at Chitkara Institute of Engineering and Technology, Rajpura(Punjab). (6) 11th Punjab Science Congress held on 7th -9th February 2008 at Thapar University, Patiala. (7) National conference on latest developments Production Engineering held on 13th-14th June in Mechanical and 2008 at RIMT IET, Mandigobindgarh (Punjab). (8) 14th session of Punjab Science Congress held on 7th-9th Feb 2011 at SLIET, Longowal (Punjab). (9) National conference on Recent trends in Mathematics & its applications 15 (RTMA-11) held on 16th – 17th December 2011 at SLIET, Longowal (Punjab). (10) National Conference on “Mathematical Modeling, Simulation and Optimization” held on 20th July 2012 at Chitkara University, Rajpura (Punjab). (11) 21st International conference of forum for Interdisciplinary Mathematics on Interdisciplinary Mathematics, Statistics and Computational Techniques held from 15th-17th Dec. 2012 at Panjab University, Chandigarh. (12) 16th Punjab Science Congress on 7th-9th Feb 2013 at Baba Farid University of Health Sciences, Faridkot(Punjab). (13) National congress on Science and Technology on 30th-31st May 2013 at DAV Institute of Engineering and Technology, Jalandhar, Punjab. 16
© Copyright 2026 Paperzz