MAREFSUP BV
S ILOWEG 600
5222 BM ‘ S -H ERTOGENBOSCH
Tel; 00 31 73 6270550
E-mail; [email protected]
www.marefsup.com
Photo 1; R404A / Pekasol compressor unit; Capacity; 150 kW at -25 /+40 °C
Compressor & Chiller unit
assembly
MAREFSUP can do a lot more than
just deliver Heat Exchangers, pressure
vessels and its belonging components.
MAREFSUP BV has the expertise and
the means to deliver complete assembled compressor or Chiller units to the
requirements of the customer.
These units can be delivered including
the electrical switchboard with its controls, as well as the insulation system
on the heat Exchanger and piping.
Good quality for a competitive price
F EATURES
Photo 2; NH3 compressor unit; Capacity; 315 kW at -25 /+42 °C
• Long term experience and knowhow of
Natural refrigerants;
• Complete delivery and assembly of the
package, incl.complete 3D design
engineering by MAREFSUP BV;
• Delivery incl, P&ID, itemlists and Manuals;
• Low oil carry over due to the application of
high efficiency oil separators;
• Tailor made solutions to the requirements of
the Customers;
• Delivery including CE-PED declaration of
conformity or certification by ships
classification society;
The picture besides shows a CO2 compressor unit to a customer in New Zealand. The Compressors have a central
oil separator / oil reservoir with hos gas
defrosting possibility by temporarily increasing the discharge pressure of the
compressors to +5 ° Celsius. The compressor unit is connected to a CO2 liquid separator to which 4 vertical
platefreezers with 26 stations are
connected.
Technical information
General:
Remarks
Application
Shore and Offshore
Dimensions & Capacities
Acc. Customer requirements
Design:
Thermal design
Unit design / Arrangement
Mechanical design
Refrigeration design
Tailor made solutions
Remarks
MAREFSUP
MAREFSUP
MAREFSUP
MAREFSUP
Heat exchangers will be from
INTEGASA
Refrigerants
Ammonia, HFC’s, CO2 , Propylene,
Others on request
Design temperatures
From -50 °C and higher
Design Pressure
Up to 100 Bar
Refrigeration data:
Execution:
Heat Exchanger materials
Carbon Steel
Titanium
CuNi 90/10
CuNi 70/30
Stainless; AISI 304, 316L, 316Ti
Super duplex; SAF2205, SAF2507
Others on request
Covered standards, design
codes and Classification societies for unit design.
Standards and design codes
CE-PED
ASME
BS-PD5500
AD Merkblätter
Marine Classification societies
American Bureau of Shipping
Bureau Veritas
Det Noske Veritas
Germanischer Lloyd
Lloyds Register of Shipping
Russian register of Shipping
Registro Italiano Navale
Ammonia
5-10 ppm.
Oil carry over:
Refrigerants
Accessories
Stop valves
AWP or Danfoss
Control equipment
Danfoss
Electric motors
Siemens, Leroy Somer
Software:
Unit design
Solidworks Premium